Micron D9 GMH\GKX\JKH etc club

[kuebk]

Hmm, I had something waiting for me in the mail today




A kit of Transcend aXeRam DDR2-1200! I had a kit of these last year that unfortunately died after about one month, I can only assume due to the 0.12v overvolt of the Maximus Formula along with no active cooling. I did RMA them but the replacement I got didn't have D9GMH but Elpida I ended up selling them on eBay.

But as for this kit, do they use Micron ICs like the first ones I had did? If you know about Transcend memory, you know to look at the letter after the barcode on the stickers:



(I already knew they were D9 before I bought them)

So far, it looks like they only need 2.12v real for their rated speed and timings.

Nice.
Recently bought 2 sets of ballistix's tracer 1066, 1st do 600cl5 @ 2.12, 2nd do 600cl5 @ 2.14 - great results imo.
Also have 3rd set of them which do 600cl5 @ 2.2v

[Shiranui Gen-An]

Dual SuperPi 32M@DDR2-1300 5-5-5-15-3-30 542FSB 2.45V


I had to switch to my secondary full PC rig with the DK X48 as I accidentally killed the HD3870 in the Maximus Formula open air bench (dropped a Team Xtreem stick on the card and it broke ONE of those TINY components right above the PCI-E connector ), but that turned out to be a boon. I was able to manage dual 32M stability at 542FSB on the 5:6 divider with 2.45V BIOS set



As for bandwidth, I almost managed 11K across the board!

[CryptiK]

Nice work. I love that board for D9 overclocking, it does it so well.

[Don_Dan]

Nice results Shiranui Gen-An!

[radaja]

well after testing my new Q9650 to find the
lowest vcore for 4500MHz ,i decided to test out my
four sticks of cellshock pc8500 d9gmh's that i got.
i ran each stick with memtest86+ to see which
ones were the best.
the first kit had one stick that could run ddr2-1200
with 2.28v and one that needed only 2.14v in bios.
the other kit had one that needed 2.18v and one that
needed 2.14v.so i took the two good ones and tried
9x500@4500 w/1.37v ddr2-1200 w 2.14v bios 2.09v load.
these two are just as good as my last set of pc8000 cl4 kit.
now i have hope that with this kit and my new Q9650 i can
possibly do 9x556@5.0Ghz ddr2-1333MHz.i did it with my
E8400 lets see if i can do it with a quad core.

prime blend 1hr 18m

prime blend stopped

everest

[JULO]

GoodRAM PRO 900

GoodRAM is not popular in USA I think
That's because it's polish factory, they export their products only to central europe.

GoodRAM DDR2 2x1GB are the followed kits:
- 800mhz CAS4 (D9GMH)
- 900mhz CAS5 (D9GMH from april '08, GKX to april '08, later GKX too, as I see)
- 1066mhz CAS5 (D9GKX to february '09, HCD from feb '09)
- 1200mhz CAS5 (D9HCD only)
all of them are built on HJ-M1

A week ago I bought a kit of 900 and tested it on P965 (commando) with P4 631 Cedar Mill. sorry, but I didn't have anything better at the moment

some pictures:







the ones that I got were built with D9 GKX

CAS3
mem test 100% stable



highest super_pi @ 2.65V



highest valid @ 2.85V (all voltages measured with multimeter)

http://valid.canardpc.com/show_oc.php?id=816114

CAS4

mem test 100% stable



I didn't have enough time to do some CAS4 PIs or valids, sorry
However I'll try to get into CAS3 500+ club with E8600.

Later I'll share with some other tests, so be patient

[Shiranui Gen-An]

Just having some fun with my DK X48 and Cellshock PC2-9200.

[aslanwas]

Wow that's mice memory, i always loved cellshock, yesterday i got some crucial ballistix which should be capable of 1300 @ 2,12V, will post results later :d

[Don_Dan]

Good to see someone of the club still playing, for now I can't do anything, I'll give a kit of good old D9 a spin after Christmas!

[radaja]

Shiranui Gen-An,very nice fsb action.looks like another
great set of cellshocks.

[CpmF]

661Mhz CL5 & 2.35v :



I'm fed up of my P5N-e but my tpower i45 don't want to show me anything with my D9GMHs

[radaja]

thats because your OCing it sideways
seriously though nice results

[aslanwas]

thats because your OCing it sideways
seriously though nice results

he's absolutely right man

[JULO]

http://valid.canardpc.com/show_oc.php?id=854624
CAS3 500+
GoodRAM 900

[Don_Dan]

http://valid.canardpc.com/show_oc.php?id=854624
CAS3 500+
GoodRAM 900

VDIMM?

That's a good achievement, though I don't like those suicide screens to be honest, I like to clock my RAM up and still be able to run a benchmark, like Everest.

[Shiranui Gen-An]

@shiranui
If you need some OC Hardware, also ddr2 ram Team Xtreem 1300, contact FOX from TEAM O.C.X. , also on hwbot.com he has a lot for sale at the moment

He dropped the price to a level I was willing to bite on, so I will have some shiny new Team 1300s on the way.

[aslanwas]

He dropped the price to a level I was willing to bite on, so I will have some shiny new Team 1300s on the way.

wow, waiting for 1600+ under dice
i also got some crucial ballisitix 1066@1300 5-5-5-15 2,14V

[JULO]

Vdimm? 3.15
but they're still alive, survived this voltage

[Shiranui Gen-An]

I'm fed up of my P5N-e but my tpower i45 don't want to show me anything with my D9GMHs

That's rather odd, I've seen some nice clocks with D9 on the I45.

[toyone]

Crucial Ballistix Treacer 1066Mhz D9GMH + DryIce
Foxconn Mars (Mch paper pot )
E6400 DryIce
Chieftec 620W
pic1
pic2
pic3

CL4-4-4-12@1311Mhz@2.85V
CL4-5-5-15@1484Mhz@2.85v

Hungarian CL4 record.

[JULO]

yesterday I got a kit of Xtreem A2-DD2-1200
10. week of 2007 6TD22

it does 1200 4-4-4-12 @ 2.42V full stable
I'll try to set some records when I'll get better Mobo
I think Commando is good only for CAS3



[img=http://img22.imageshack.us/img22/4848/pict0003f.th.jpg]

sorry for the quality

[Don_Dan]

Crucial Ballistx Treacer 1066Mhz D9GMH + DryIce
Foxconn Mars (Mch paper pot )
E6400 DryIce
Chieftec 620W

Hungarian CL4 record.

Good work!

[toyone]

Thanks Don_Dan.

[aslanwas]

whats the germany CL4 record ?

[JULO]

I did some quick tests with my Teams 1200
@ 2.30V (real)