Well your sig shows 42... so you might wanna check the logs to be sure it isn't bombing any units partway through.
Well your sig shows 42... so you might wanna check the logs to be sure it isn't bombing any units partway through.
The Cardboard Master Crunch with us, the XS WCG team
Intel Core i7 2600k @ 4.5GHz, 16GB DDR3-1600, Radeon 7950 @ 1000/1250, Win 10 Pro x64
Guys.. I haven't been folding for months, and was never a serious folder. I just saw dak's sig and copied it
Check again.. now it's 343
The GTX 280's are doing fine at the very least.
Lookin' good!
The Cardboard Master Crunch with us, the XS WCG team
Intel Core i7 2600k @ 4.5GHz, 16GB DDR3-1600, Radeon 7950 @ 1000/1250, Win 10 Pro x64
Ok, another sanity check - do the PPD look ok? GTX 280's are running 700 core with synced shaders, the 8800 GTS is an old G80 core card, running 650Mhz GPU with synced shaders. I know I can maximize performance by lowering core and increasing shaders, but I know these settings to be stable so I just kept them. FAH is flakey enough as it is to set up and all.
I've not had a 280 but in relation to my 260's I'd say in view of your clocks it is good. Stock clocked core and shaders set to 1512 or 1566 or 1620 (guessing) could reduce your temps a little and maybe power too?
I'm not aware of any recent testing on the core mem shader issue but, in the beginning, increasing the core or for that matter mem would only reduce time by a few seconds per WU
If you don't know already ...in fahmon right click on the headings (fortschritt, name usw) to get, and edit, a selection of details on screen
Last edited by OldChap; 11-28-2009 at 01:59 PM.
My Biggest Fear Is When I die, My Wife Sells All My Stuff For What I Told Her I Paid For It.79 SB threads and 32 IB Threads across 4 rigs 111 threads Crunching!!
So.. core down, shader up right? Okey.. let's see if I can crank the shaders
GTX 280s are on water, so temps are a nonissue. The 8800 is on stock air...
Edit: Okey.. changed clocks to 600/1620/1000 core/shader/mem.
Ran fine for 3 minutes then froze the screen - I guess that's a little bit too much for the shader, at least at stock VGPU. Does raising VGPU help here? Temps are fine as I said, ~46C core while folding.
Running 600/1566/1000 now. If that doesn't work, then screw it, I'm gonna up the Vgpu
Last edited by jcool; 11-28-2009 at 02:33 PM.
And another question: Does the driver version matter? IE should I update to 195 drivers? Running on 190 something I think.
Can't answer that one, never wanted to bump voltages cos temps were high enough already.
All shader overclocks seem to have a temp limit...I can run 1620 if ambient is below about 10deg but must drop to 1566 up to maybe 23 then above that 1512. Your watercooling should improve matters once you find the level to start
Edit: I'm still running 190.62 on the 260's ...I think it is 182.xx on the gx2's and I tried 195 on the 98gtx last week ....all seemed to work
Last edited by OldChap; 11-28-2009 at 02:54 PM.
My Biggest Fear Is When I die, My Wife Sells All My Stuff For What I Told Her I Paid For It.79 SB threads and 32 IB Threads across 4 rigs 111 threads Crunching!!
Originally Posted by bot@xs
i am on the boat...folding for XS
triggered by the recent loss ... R.I.PThanks for helping!
Are these SMP WUs supposed to be worth 400 points? I heard the Linux SMP was much better than the Windows version but it seems to be slower...................it's using all 4 cores
i3-8100 | GTX 970
Ryzen 5 1600 | RX 580
Assume nothing; Question everything
Yes, that's what they're worth. However, there are bonus points for how quickly you return the WU (if you have a passkey, so get one if you don't). The a3 core is thread based as opposed to using mpi and you will see 100% cpu usage in linux. I'm hearing windows is slightly faster on these WUs.
lol windows slightly faster after i setup VMware player, ok yah i'm investigating this passkey deal, hope it makes a difference
i3-8100 | GTX 970
Ryzen 5 1600 | RX 580
Assume nothing; Question everything
Any guide on how I can track my progress and get charts like this?
i7 rig is up and running...
You should find that chart at http://folding.extremeoverclocking.c...&srt=3&t=36362 later once you submit a result Then click on your name.
I've not run Big WU's but I understand you need to fold using your own personal code called a passkey to get the best points. You need 10 WU's completed using this first to get the upgrade.
Last edited by OldChap; 03-28-2010 at 12:07 AM.
My Biggest Fear Is When I die, My Wife Sells All My Stuff For What I Told Her I Paid For It.79 SB threads and 32 IB Threads across 4 rigs 111 threads Crunching!!
This is the client.cfg I get from my 2 SMP's, is there any way I can optimize it?
[settings]
username=metalop1g
team=36362
passkey=
asknet=no
machineid=(1 and 2)
bigpackets=big
extra_parms=-smp -verbosity 9 -local
[http]
active=no
host=localhost
port=8080
usereg=no
[clienttype]
type=3
[core]
addr=192.168.2.101
Last edited by metalop1g; 03-28-2010 at 01:06 PM. Reason: clarification
getting a passkey http://folding.stanford.edu/English/FAQ-passkey and completing 10 smp wu's using it will allow you to get more points and I believe the newest wu's or even move to BIGAdv wu's that are designed for 8core/threads and give Big points.....Hoping others here will confirm
My Biggest Fear Is When I die, My Wife Sells All My Stuff For What I Told Her I Paid For It.79 SB threads and 32 IB Threads across 4 rigs 111 threads Crunching!!
I have my passkey, but now I need to add it to the file without voiding my WU.. can I do this?
Don't know, I've never done this (no hardware). Maybe wait on one of the others or to play safe use the -oneunit flag (stop, add this and then restart)
My Biggest Fear Is When I die, My Wife Sells All My Stuff For What I Told Her I Paid For It.79 SB threads and 32 IB Threads across 4 rigs 111 threads Crunching!!
hi, new member / folder ( actually folding before i got activated as a member :O! )
just wanted to say since i've been folding this team has gone from 24 to 22 wow!! we're actually chugging along quite a bit!
btw, does anyone know waht the different colours for the extreme oc sig thingys are?
Last edited by penguins; 04-01-2010 at 01:24 AM.
If your annoyed by sigs telling you to put things in your sig, then put this in your sigyou know you're addicted to watercooling when:
Colours are related to production numbers.
6k+
3k+
1.5k+
800+
400+
200+
100+
1+
School
So.. Yea, I'm at school, folding on a desktop e8400 while on my session. Is there a way i can get around the damn Novell login and monitor the entire workgroup's units from the same pc, or is there a way I could setup a "bot" client, a slave client that will only report progress to a "master" or simply to the 1ntarwebz directly? I tried fahspy but I can't access the hdd of the other pc's in the same lab(workgroup), even the guy beside me that I know he's logged in right now, I cant access his HDD..
Installed it as a service (2x cpu client) and opted not to use smp the smp client because I can not provide admin username and password, while double cpu client doesn't ask for anything
It is not recommended to borg school computers. Actually, we discourage it, as it can get people in loads of trouble. Stanford doesn't really like it either because they get flak over it too....
The Cardboard Master Crunch with us, the XS WCG team
Intel Core i7 2600k @ 4.5GHz, 16GB DDR3-1600, Radeon 7950 @ 1000/1250, Win 10 Pro x64
Altough I knew responses like this were coming, this does not really help me. While I get your point, I re-read the computer user agreement and distributed computing is not prohibited, but it's not like they really faced any. It kinda pains me to see 30 something e8400 idling all day long, dealing with ppl surfing the internet, doing Word or Excel.. folding only takes place while somebody is logged in, stops when he logs out, and I saw absolutely no slowdown, even with both cpu's @ 100%.
I assume my actions and do so only because the leash is set REALLY loose. Even computer science guys are not really l33t around here and it's not really hard to take over any pc around here.. Nonetheless, I'm not searching to do any harm to anybody or to the material at school. You might not want to help me, but I know somebody will. Still, thank you for your attention.
If I am breaking a rule here, just clearly tell me & I'll seek help elsewhere, i guess!
I don't want to set fire in the computer lab, but liberty feels so good..
I know, and I understand. I just don't want you getting in trouble.
The Cardboard Master Crunch with us, the XS WCG team
Intel Core i7 2600k @ 4.5GHz, 16GB DDR3-1600, Radeon 7950 @ 1000/1250, Win 10 Pro x64
Posting Permissions
Support Heatware by making purchases through their sponsored links 
Bookmarks