UnOfficial Asus Rampage II Extreme Thread

[kpablo]

I might be asking a bit much, but is it possible for some of you guys to post your settings ?

This is my settings:

MB - Asus Rampage 2 Extreme
CPU - i7 920 3849B
RAM - Dominator GT 2000 CL8
CPU Cooler - Watercooling
Fan -
VGA - gtx285
PSU - hx1000
HDD - corsair ssd
----------------------------------------------
AI overclock - [manual]
OC from CPU level up - [auto]
OC from Memory level up - [auto]
CPU Ratio setting - [21]

CPU configuration
CPU Ratio Setting - [21]
C1E Support - [disable]
Hardware prefetcher - [enable]
Adjacent Cache line prefetcher - [enable]
Intel Virtualization tech - [disabled]
CPU TM Function - [disable]
Execute Disabled bit - [disabled]
Intel HT Technology - [enable]
Active Processor Cores - [all]
A20M - [default]
Intel Speedstep tech - [disable]
Intel Turbo Mode tech - enable (Not shown if Speedstep is disabled)
Intel C-STATE tech - [disabled]
BCLK frequency - [200]
PCIE frequency - [100]
DRAM frequency - [DDR3 2000MHz]
UCLK frequency - [4000MHz]
QPI frequency - [7200GT/s]

Dram timing control
1st iformation - [8-8-8-auto - 24 -auto-auto-2N]
2nd information - [all auto]
3rd information - [all auto]

EPU II phase control - [full phase]
Load-line calibration - [enable]
CPU differential amplitude - [800mV]
Extreme OV - [disabled]

Current voltage
Cpu voltage - [1.2625v]
CPU PLL voltage - [1.9v]
QPI-Dram voltage - [1.550v]

Current voltage 1.131v - 1.508v - 1.111v - 1.508v
IOH voltage - [1.15v]
IOH PCIE voltage - [1.5v]
ICH voltage- [1.15v]
ICH PCIE voltage - [1.5v]


DRAM Bus voltage - [1.65v]
DRAM REF voltage - [auto]

Debug mode - [string]
Keyboard TeakIt comtrol - [disabled]

CPU spread spectrum - [disabled]
PCIE spectrum - [disabled]
CPU clock skew - [auto]
IOH clock skew - [auto]