so can some one now make a clear pic how we should mod a P5B for OVP ?
No one knows the modification. I could sure use it this friday:-)
Where courage, motivation and ignorance meet, a persistent idiot awakens.
loc.o
Try to use schematics in last loopy83 post. But except Hipro maximizer just hook that 500 ohm (better VR 1-5k) to quiet +3.3V. You will get 132mV extra.
No warranty tho, have P5B atm to check. But it's easy.
interesting thread
I'm back to overclock and i'm waiting for i7 setup, anyway i'm playing with a p5b dlx (i like old school mobo) but i'm a bit confused, can someone tell me again how to bypass this damn ovp? I'm limited to 1.936v and i hate limits...
Thanks in advance
Edit: I'll try to connect a 500ohm resistor from pin 3 to 3.3v rail... i hope it'll work
i'd +0.230v with normal vmod, than passed from 1.7v to 1.93... after the ovp i had to low down the voltage in the bios till 1.62v so i can have around 1.97v on cpu-z (vmod+ovp)... or you can set again 1.7v on bios and turn down the vcore mod it's the samething
Anyway with this ovp mod you can go higher than 2v without problems
c1rcu1tburn3r, so it's 3,3V rail?
Vmods - what can possibly go wrong? ©
My version of OVP mod on P5B DLX
http://www.xdevs.com/images/ln2_asus/ovpm.png
Got 2.1V on celly 356, and this allowed 8127MHz clock archivement from my hwbot teammate.
Thanks a lot for sharing , got a simple question before i give this mod a go. If i got it and understood correctly 1K ohm VR trimed down to 500ohms conected to 3.3v rail , but the other end of the VR im not clear where to solder the other end ? Can you please provide a clearer picture if possible and explain exactly wich point to solder the other end of the VR ? Thank you in advanced c1rcuitburn3r , appreciate your help very much. I just want to be 100% sure on this mod as i have a dead P5B-Deluxe already but i found a new one on e-bay and bought it , this new board looks very promising for high fsb and i dont want to kill it as they are hard to find good P5B-Deluxe boards. cheers M8.
Kind Regards: Angelo.
There's something that I don't understand: should we do just the OVP mod or make the OVP mod + vmod to overtake the ~1,95v ??
Thxxx
You need vCore and OVP Mod.
ok thank you guys !
TiN_EOF, voltageregulator for stable OVP?
Vmods - what can possibly go wrong? ©
yes-yes, details are here http://www.xtremesystems.org/forums/...90&postcount=1
Bookmarks