The E0 Q9550 SLB9V thread (finally!)

[KingLex]

You could spend your BIOS settings you are using to 4.0GHz? Here I have done several combinations of values, but I will try to 1.34V (VNB) here. Thank you.

*** GigaByte GA-EP45-UD3 BETA F9a
Robust Graphics Booster: Auto
Cpu Clock Ratio: 8.5

*** Clock Chip Control ***
CPU  Host Clock Control: Enabled
CPU Host Frequency(MHz): 471
PCI Express Frequency(MHz): 100
C.I.A.2: Disabled

*** DRAM Performance Mode ***
Performance Enhance: TURBO
(G)MCH Frequency Latch: 333
System Memory Multiplier (spd): 2.40B
DRAM Timing Selectable (spd): Manual
*** Standard Timing Control ***
CAS Latency Time: 5
tRCD: 5
tRP: 5
tRAS: 18

*** Advanced Timing Control ***
All AUTO

*** Motherboard Voltage Control ***
>>>CPU
Load-Line Calibration: Enabled
CPU Vcore: 1.3250 V ( 1.296 v in cpu-z)
CPU Termination: 1.30v 
CPU PLL: 1.50V
CPU Reference: 0.878v
>>>MCH/ICH
MCH Core: 1.34V 
MCH Reference: 0.903V