ASUS P5W DH - Problems + Fixes Thread

[Yolanda]

i am new to overclocking. i have the 1.02g revision. bios 3001. ran prime95 on default settings. system fine. changed fsb to 333, e6600 @3ghz vcore 1.325v and left mem volt on auto. get 1 erroe after 10 min on the 1024k test.

what must i do. core temps went upto 67 deg cel according to cputemp. are these temps fine.

And what memory frequirency you set (even if you didn't change it, it will be automatically changed when CPU FSB is changed)? Try lower, if it's higher now then memory specs. Also after, if steel fail, try to disable Hyper Path, then add some CPU vcore, to something ~1.37+V.