New watercooling setup may get me my 4.1ghz 965

[Titan7171]

Heres a few pics












capable now cooling 1.57v idle 35c, load 45c cinebench......the rad is huge


prime goes to 47c..........not bad for 1.6v in windows.........1.57 in bios.



not sure if Im going to keep it like this though

more testing to come.

[Newblar]

thats a huge radiator, what is it?
hope you get that 4.1g 24/7

[Titan7171]

thats a huge radiator, what is it?
hope you get that 4.1g 24/7

It's a

Watercool MO-RA 2 Extreme Performance 9 X 120mm Radiator Core

got it from PC-performance.

[wuttz]

wow 4G on a fanless rad! very nice!

[FlanK3r]

good job !

[ridney]

nice setup titan! i have read your post at liquid cooling section that rad is pretty good, i bet you could lower your temps more about 5c if you put fans on it

here's a snapshot of my cpu block, a sibling of your sapphire one

[Smartidiot89]

Holy mother of voltage I wouldn't dare go above 1.55v even with good cooling for a 24/7 clock

On topic, good results, keep pushing! Give us atleast 4.3ghz suicide CPU-Z

[Titan7171]

wow 4G on a fanless rad! very nice!

its not fanless its Ghetto style

good job !

thanks!

nice setup titan! i have read your post at liquid cooling section that rad is pretty good, i bet you could lower your temps more about 5c if you put fans on it

here's a snapshot of my cpu block, a sibling of your sapphire one

Very sweet looking cpu block how your temps?

I just threw this thing together so its not very pretty......Ill be getting a 5870x2 when they come out so Im not going to finalize anything yet.....but I do have my eye on these fans

180mm 100cfm at 18db, 4 will equal 360x360mm...instead of 9x120mm

http://www.newegg.com/Product/Produc...82E16835220037

[Titan7171]

Holy mother of voltage I wouldn't dare go above 1.55v even with good cooling for a 24/7 clock

On topic, good results, keep pushing! Give us atleast 4.3ghz suicide CPU-Z

I did that a couple months ago on ac cooled air

[Tommie_lj]

nice setup! but youre going to use fans later, right ??

[Titan7171]

nice setup! but youre going to use fans later, right ??

from above...

I just threw this thing together so its not very pretty......Ill be getting a 5870x2 when they come out so Im not going to finalize anything yet.....but I do have my eye on these fans

180mm 100cfm at 18db, 4 will equal 360x360mm...instead of 9x120mm

http://www.newegg.com/Product/Produc...82E16835220037

Im gonna make a custom fan bracket for this rad

[FlanK3r]

1.5V with AIR is not big problem (i have it and temps max 59C in burn)

[Cele303]

its not fanless its Ghetto style

It is kick ass style! I'm so loving it! I have the same A+ as you, not a high quality case but brutal design!

You plan to keep these oc settings 24/7? No problem for your cooling to handle 1.60V cpu vid but do you think your mainboard can handle it 24/7 in long term?

[Smartidiot89]

4444mhz on water with a retail sample... Awesome, nice work man!

And yes I am a sissy, no more than 1.55v on AIR for me and that will be with a TRUE and 2 good push/pull fans

[FlanK3r]

i think, he got it with AIR 4444MHz, because i got with AIR and 1.55V 4326 MHz and yesterday 4335 MHz with the same voltage. 965 BE is a bit better for OC than 955

[Titan7171]

4444mhz on water with a retail sample... Awesome, nice work man!

And yes I am a sissy, no more than 1.55v on AIR for me and that will be with a TRUE and 2 good push/pull fans

Thanks man,

That was on air ac cooled 11c idle 27c load

i think, he got it with AIR 4444MHz, because i got with AIR and 1.55V 4326 MHz and yesterday 4335 MHz with the same voltage. 965 BE is a bit better for OC than 955

yup all air buddy

yes........FlanK3r you are right there man 4.33ghz good work!

[Titan7171]

Some pics before installation on the Mo-Ra

Close to $100 on fans

heres a super quick video of the setup.......still unfinished http://www.youtube.com/watch?v=PM0BAKlGmk8





comapred to a 120mm



Here it is on the rad



thas a lot of led light

[SNiiPE_DoGG]

mmm 4x180mm fans thats quite a tight fin spacing rad though isnt it? I think you really need a push-pull to get the kind of pressure your looking for... they only spin @ 700rpm and less than 1mm h2o pressure, its not very much

[Titan7171]

mmm 4x180mm fans thats quite a tight fin spacing rad though isnt it? I think you really need a push-pull to get the kind of pressure your looking for... they only spin @ 700rpm and less than 1mm h2o pressure, its not very much

Its fine, I feel alot of air passing through to the other side....Mo-Ra works excellent with low pressure fans...Plus these things are silent.......I dont want to hear air flow.



some results

all stock Phenom 2 965 1.44v

Ambiant right now is 21.5c

Idle is 23/24c

load prime is 32c



and running 1.57v in bios windows shows 1.62v

4ghz prime is showing max load of 40-42c.





it will prime at 1.55v but I left it like that because thats my 24/7 voltage anyway for 4.1ghz.

[Zeus]

Wow, that mo-ra with those huge fans is awesome!! Great cooling power.

[FlanK3r]

what do u mean about Corsair h50? Il buy new MB in April 2010 (890FX), DDR3 RAMs and some Xigmatek AIR cooler or Corsair h50 for x6 Thuban

[Titan7171]

Wow, that mo-ra with those huge fans is awesome!! Great cooling power.

Thanks Im glad I finally went watercooling and did something different than going with the 9x120mm fans. I think it looks better with 4x180mm

what do u think about Corsair h50? Il buy new MB in April 2010 (890FX), DDR3 RAMs and some Xigmatek AIR cooler or Corsair h50 for x6 Thuban

Hmmm, I dont know man, I see H50 only cools like an air cooler and not that great, pretty good but not close to real watercooling. 6 cores will be to much for H50 if using high voltage for overclocking. But it will be much more quiet if that matters to you.

I know you want to push your cpu very high and will try high voltage but I dont think you will be happy with H50 for 6 cores

Maybe 1.55v will go to 70c to high

look at some results from Guru3d...http://www.guru3d.com/article/corsai...ooler-review/6

[Zeus]

what do u mean about Corsair h50? Il buy new MB in April 2010 (890FX), DDR3 RAMs and some Xigmatek AIR cooler or Corsair h50 for x6 Thuban

Don't waste any more money on aircoolers man, watercooling is the way to go to get some good OC's and good temps.

Just do some research in the liquid cooled section of this board and get wet!

[FlanK3r]

hehe

[DevilCry]

The fans on that rad are HUge!!!!Great work