What's the difference between old TR3X6G1866C7GTF and new CMG6GX3M3A1866C7? Are the CMGs worse clockers? Specs and all is same.
What's the difference between old TR3X6G1866C7GTF and new CMG6GX3M3A1866C7? Are the CMGs worse clockers? Specs and all is same.
CMGs may have different chips on themOriginally Posted by Esajuppeli
From my experience CMGs are worse clockers
You have had them? You have had TRs too?CMGs may have different chips on them
From my experience CMGs are worse clockers
Yes, I had TRs...they died
I get back from RMA CMGs but they suckso I sold them!
Waiting for new Adatas
are you guys with poorer CMG with 2000 cas8 or cas7 models ? if cas8 probably they're tightly binned so cas7 left to the cas7 models ?
I'm buying CMG 1866C7s. Hope they will clock.1866Mhz just for that, that there are no better in Finland. And I prefer to order from my home country.
Last edited by Esajuppeli; 10-27-2009 at 05:22 AM.
I had only tried TRX1866C7(very good kit
Some guys here have tried CMG2000C8 and they suck...poor clockers!
A friend of mine tested a CMG1866C7 kit some days ago....it was not good
Does CMG 1866C7 go 2000Mhz @ Cas 7? Or 2100 on Cas 8? Those are average TR- clocks.
2000Mhz CL7 it's easy IMO
My first kit of 1866C7(TRX) could do 1020+ 7-7-6-20-60 wih 1.72V...if I remember well
The CMG kt that I got back from rma couldn't do that
I hope so. Already ordered them.
My babies - Corsair DominatorGT 3x2Gb 2000 cas7-8-7-20 - died on me last night. TR3X6G2000C7GTF G lot 009051724. Never been run any higher than 2000 MHz (7-8-7-20) and 1,65 VDIMM. What do I do now? Long way to California… Bought in the Corsair Store
I have been turning my PC upside down since June this year as I tended to get corruption on my disks. After my second Intel X25-M SSD 160 GB G2 corrupted again last night it was time for MemTest, and here I am… Feel like a donkeys arse with all the problems that I’ve had and its only due to bad RAM…
Corsair RMA Link
Yes, Yellowbeard, a tall rough man with a big yellow beard
'Cause your officially from Corsair, i'd like to ask what's the real difference between TR and GMC?
No difference. We had to change our part numbering scheme for channel purposes. The CMX parts are the newer parts after the Elpida Hyper disaster.
Are newer memories still with Elpida Hypers, or even some better chips? (Thou Elpida has its durability -
It's the newer Elpida Hypers.
Have you tested the overclockability of the newer chips?
Sorry about the question flood, but really, are they better overclockers? Or more important, are they more durable than "old" Elpida Hypers?
Thank you for your help Mr. Yellowbeard. Could not find the link first so I sent a letter but have filled out the necessary info in your link and guess that will take care of things. Again thx!
- Rob
Yes of course they are or we would not have rereleased the memory using Elpida Hyper ICs.
Have you tested the overclockability of the newer chips?
I'm sure someone in the lab has but, they are also screened to run their rated specification. Nothing beyond that is guaranteed.
younpro and i have put our newer elpida kits through hell and back......i'd say they are fine
after 3 boards
4 procs
more than 100 hours of stress test
still going strong...
custom blend..
4.3ghz HT ON 2050 7-7-7-20 1N
initial test 2100 7-8-7-21 1N
vdimm set 1.68 eleet read 1.72v DMM read 1.6798 (load)
vtt set 1.5v eleet read 1.6v dmm read 1.501 (load)
Great, buddy.^^
7-8-7-21 also was my most stable timing combination. Too bad you cannot max out performance, but it's not that big of a loss anyway.
For benching one can tighten timings much more. That's^^ a pleasant 24/7 setting.
Xtremesystems.org
i7-4820K * ryba 2-stager + 1-stager * EVGA X79 Dark * 32G Team Xtreem 2666C11 * EVGA GTX 680 SC Sig. * Intel G2 80G * Corsair HX1000 * Lian Li PC-70B * Watercool Heatkiller, EK Fullcover/Backplate for GTX, MCP355 Dual Setup@Koolance RP-402X2, PA120.3+Alphacool 360, Tubing 16/10.
amazing ram
sorry for my bad english
Team Inkognito is ready for overclocking!
Posting Permissions
Reply With Quote
Bookmarks