Quote Originally Posted by Bojamijams View Post
I got mine and it works great. I only have two issue with it really, both are minor

1) The top plug has little to no room for the water to be poured into the reservoir because the CCFL tube is right under it. They're both centered and there's probably 2mm at the MOST between the bottom of the hole and the top of the CCFL tube. I tried filling the reservoir (had a compression fitting on top of the res, connected with a tube to my top fillport) and only a tiny amount of water went it before it was backed up. The res is empty, but the tube above the fillhole is filled with water. So to fill it up, I had to get rid of that whole thing, use a tiny screw to move the CCFL tube out of the way, and use a squirter to get water in there. Very annoying when trying to fill it up. Will be less annoying now that I have to only top it up, but I can't use my fillport anymore, I have to remove the side panel and use the same method..

2) There's a lot of bubbles that build up in the reservoir if you fill it up to the top since the inlet and outlet are both at the bottom so in effect, most of the reservoir never gets any flow. Thinking back, it would be better to ask for the inlet to be at the top and the outlet at the bottom
Wow really, i had no problems filling mine up. Yup there are alot of bubble as they stick to the spirals in the res, but over time they will go away. Mine took about 3 weeks to fully clear. After that it looks like solid glass.