Page 59 of 65 FirstFirst ... 94956575859606162 ... LastLast
Results 1,451 to 1,475 of 1610

Thread: Asus M3A79-T Deluxe

  1. #1451
    Xtreme Member
    Join Date
    Jan 2009
    Posts
    128
    Hello, Dolk from OCF

    I'm looking for anyone that has unlocked any of their cores using the new Unleashed mode with the 1203 BIOS.

    If you have please share CPU with model number, and complete BIOS and System Configuration.

    --Dolk

  2. #1452
    Xtreme Member
    Join Date
    Oct 2008
    Location
    GREECE
    Posts
    133
    After using without problems for 1 year the BIOS 0703, I decided to try the new bios 1203.
    Unfortuntately I have many conflicts with my Cellshock memory and I decided to go back to 0703.

    The problem is that now, the EZ flash utility gets a message that the board is newer than the BIOS and it doesn't allow me to flash it!

    Any ideas to force the Flash??
    9950@3760mhz 125TDP, VCORE 1,55, 2x1GB CELLSHOCK PC8000 4-4-4-12, VDIMM 2,1, ASUS M3A79-T, SAPPHIRE 4850 ,CORSAIR 750w, COOLERMASTER HAF 932,Watercooled by EK SUPREME, ΝΟΚΙΑ Ν95-GRAPHITE


    3.760mhz in CPUz

  3. #1453
    Xtreme Member
    Join Date
    Jan 2007
    Posts
    211
    Quote Originally Posted by gOtVoltage View Post
    Use the AFUDOS ,, like below and at the end use( /pbnc ,,this will force flash)

    Below is using a Floppy Drive letter

    Dont forget to use( /i )before the BIOSromname.


    A:\ AFUDOS.EXE /i0803.rom /pbnc
    This was helpful

  4. #1454
    Xtreme Member
    Join Date
    Oct 2008
    Location
    GREECE
    Posts
    133
    In my case no.
    Even if I use the Afudos command, I get the message that my board is newer than the bios 0703...
    9950@3760mhz 125TDP, VCORE 1,55, 2x1GB CELLSHOCK PC8000 4-4-4-12, VDIMM 2,1, ASUS M3A79-T, SAPPHIRE 4850 ,CORSAIR 750w, COOLERMASTER HAF 932,Watercooled by EK SUPREME, ΝΟΚΙΑ Ν95-GRAPHITE


    3.760mhz in CPUz

  5. #1455
    Xtreme Member
    Join Date
    Sep 2004
    Location
    SW OK
    Posts
    157
    Quote Originally Posted by RASTAVIPER View Post
    In my case no.
    Even if I use the Afudos command, I get the message that my board is newer than the bios 0703...
    I had this same problem with my M3A78-T ,had to use this version of afudos,these are ES versions from asus forums.

    http://www.fileden.com/files/2006/8/...FUDOS229ES.zip http://www.fileden.com/files/2006/8/...FUDOS236es.zip
    PH II 550 x2@X4B50 3.2 1.35v
    M4A79X-EVO
    2x2 corsair 1600 Dominator
    LITE-ON 16X DVD BURNER
    HIS 5770
    swiftech mcr220,apogee gt,mcw30,mcp655,micro-res
    PCP&C 610 silencer
    black stacker 810



  6. #1456
    Xtreme Enthusiast
    Join Date
    Oct 2007
    Posts
    504
    Quote Originally Posted by RASTAVIPER View Post
    In my case no.
    Even if I use the Afudos command, I get the message that my board is newer than the bios 0703...
    Afudos 2.07 is working fine: "afudos207.exe /i0703.rom" (without quotes)

    I bought a Phenom II X2 550BE and unlocked it:



    Only three cores are stable under Win 7 64 bit, OC later...
    CACYC AC 0922MPMW
    IQ_NOT_LESS_OR_EQUAL

    outdated hardware

  7. #1457
    Xtreme Member
    Join Date
    Oct 2008
    Location
    GREECE
    Posts
    133
    I tried both Afudos 2.07 and 2.36 with 2 different floppy disks and both of them won't do the job.
    After I put the command in dos, it doesn't happen anything.The pc stops reading the disk and the only thing that I can do is restart, as I don't get any command prompt to try something else..
    9950@3760mhz 125TDP, VCORE 1,55, 2x1GB CELLSHOCK PC8000 4-4-4-12, VDIMM 2,1, ASUS M3A79-T, SAPPHIRE 4850 ,CORSAIR 750w, COOLERMASTER HAF 932,Watercooled by EK SUPREME, ΝΟΚΙΑ Ν95-GRAPHITE


    3.760mhz in CPUz

  8. #1458
    Xtreme Enthusiast Raiderman's Avatar
    Join Date
    Feb 2008
    Location
    Idaho
    Posts
    503
    Quote Originally Posted by RASTAVIPER View Post
    After using without problems for 1 year the BIOS 0703, I decided to try the new bios 1203.
    Unfortuntately I have many conflicts with my Cellshock memory and I decided to go back to 0703.

    The problem is that now, the EZ flash utility gets a message that the board is newer than the BIOS and it doesn't allow me to flash it!

    Any ideas to force the Flash??
    You can still flash an older rom image. I have done it with EZ flash. I went from 1103, back to 1003?? Even though it tells you that its an older one, you can still continue. At least I was able to.
    C3 Phenom II 965 BE (0941CPMW)
    Msi 790Fx-GD 70
    2x2 gb OCZ AMD Black Edition 1600mhz DDR 3
    2x MSI HD 5850's OC edition X-fire
    2x Western Digital 250gb 16mb cache Raid-0
    1x Seagate 1 TB Data
    SILVERSTONE|DA700 700W RT Power Supply
    Koolance INX-720 (Koolance 345 block)
    LianLi pc-60fwb




  9. #1459
    Xtreme Enthusiast
    Join Date
    Jun 2008
    Location
    Northern Ohio
    Posts
    664
    For mine I was able to go back BIOS by BIOS (had to go one by one, could not go back more than that in one flash) quite a ways but did reach a point that it would not let me go back any farther. I believe I was at bios 0903? Anyways, I wanted to try the mod bios 0030 for unlocking and had trouble getting back. I ended up doing some google searching and found a version of AFIDOS that let me flash back to whatever I wanted, but it was not the version downloaded from Asus. When I get back home I will see if I still have it and can put it online to download or email it if you can't find it.


    Work/Game System - ~24/7 WCG
    ASUS P8P67 PRO / i7 2600k @ 4.1Ghz / Gigabyte Radeon HD5870 / 4x4GB Corsair Vengeance @ 1600Mhz 9-9-9

    HTPC -~24/7 WCG
    Gigabyte GA-Z68AP-D3 / i7 2600k @ 4.0Ghz / Sapphire Radeon HD5830 / 2x2GB Mushkin Enhanced Essentials @ 1333Mhz 9-9-9

    XS WCG Team Forum - http://www.worldcommunitygrid.org/

  10. #1460
    Xtreme Member
    Join Date
    Oct 2008
    Location
    GREECE
    Posts
    133
    Quote Originally Posted by Raiderman View Post
    You can still flash an older rom image. I have done it with EZ flash. I went from 1103, back to 1003?? Even though it tells you that its an older one, you can still continue. At least I was able to.
    You can go back until 1003.
    But not at 703.It doen't allow u for older bios...
    9950@3760mhz 125TDP, VCORE 1,55, 2x1GB CELLSHOCK PC8000 4-4-4-12, VDIMM 2,1, ASUS M3A79-T, SAPPHIRE 4850 ,CORSAIR 750w, COOLERMASTER HAF 932,Watercooled by EK SUPREME, ΝΟΚΙΑ Ν95-GRAPHITE


    3.760mhz in CPUz

  11. #1461
    Registered User
    Join Date
    Dec 2008
    Posts
    47
    Looks like the 1303 BIOS is up.
    ftp://ftp.asus.com.tw/pub/ASUS/mb/so...eluxe/1303.zip

    Nothing very significant in the release notes. Just says support for more CPUs.

  12. #1462
    Registered User
    Join Date
    Nov 2007
    Posts
    6
    After flashing with 1303 bios, I had problems with restarting the PC, it just hanged.
    No significant changes regarding to 1203.

    Flashed back to 1203.

  13. #1463
    Xtreme Addict
    Join Date
    Apr 2008
    Location
    Texas
    Posts
    1,663
    The support list hasn't been updated yet, but I hope 1303 supports rev C3 CPUs! If it does we should all rejoice.
    Core i7 2600K@4.6Ghz| 16GB G.Skill@2133Mhz 9-11-10-28-38 1.65v| ASUS P8Z77-V PRO | Corsair 750i PSU | ASUS GTX 980 OC | Xonar DSX | Samsung 840 Pro 128GB |A bunch of HDDs and terabytes | Oculus Rift w/ touch | ASUS 24" 144Hz G-sync monitor

    Quote Originally Posted by phelan1777 View Post
    Hail fellow warrior albeit a surat Mercenary. I Hail to you from the Clans, Ghost Bear that is (Yes freebirth we still do and shall always view mercenaries with great disdain!) I have long been an honorable warrior of the mighty Warden Clan Ghost Bear the honorable Bekker surname. I salute your tenacity to show your freebirth sibkin their ignorance!

  14. #1464
    Xtreme Cruncher
    Join Date
    Oct 2007
    Posts
    332
    1303 is terrible can't overclock with it at all...

  15. #1465
    Xtreme Member
    Join Date
    Oct 2008
    Location
    GREECE
    Posts
    133
    0703 for me the best!!
    9950@3760mhz 125TDP, VCORE 1,55, 2x1GB CELLSHOCK PC8000 4-4-4-12, VDIMM 2,1, ASUS M3A79-T, SAPPHIRE 4850 ,CORSAIR 750w, COOLERMASTER HAF 932,Watercooled by EK SUPREME, ΝΟΚΙΑ Ν95-GRAPHITE


    3.760mhz in CPUz

  16. #1466
    Xtreme Enthusiast
    Join Date
    Jun 2008
    Location
    Hong Kong
    Posts
    967
    Quote Originally Posted by ASharp View Post
    Looks like the 1303 BIOS is up.
    ftp://ftp.asus.com.tw/pub/ASUS/mb/so...eluxe/1303.zip

    Nothing very significant in the release notes. Just says support for more CPUs.
    Just tried update from 0903 to 1303
    1303 is BAD , I used to run 230x16 stable , not with 1303
    I can't overclock the HTT ! It can't boot up with the same setting
    not even 205 x 16 , and the new BIOS broke the function of temperature reading of
    K10Stat , CoreTemp , Everest
    You can no longer able to read the CPU temp , all these software only show "0C" ( it works fine with 0903 )
    for your core temp

    I suggest AVOID getting 1303 , use the older version !!
    Last edited by imamage; 11-14-2009 at 09:56 PM.

    Gaming Rig
    CPU : AMD Ryzen 7 3700X (45W ECO mode)
    HSF : Noctua C14S
    MB : ASRock X470 Taichi Ultimate
    RAM : G.Skill F4-3000C14-16GTZR x4 @ DDR4-3000 CL14
    VGA : MSI RTX2070
    PSU : Antec NeoECO Gold 650W
    Case : Corsair 100R ATX
    SSD : Samsung PM981a 1TB + Corsair MP510 1.9GB M.2 SSD

  17. #1467
    Xtreme Member
    Join Date
    Dec 2007
    Posts
    170
    So any updates on c3 + this motherboard????

    I need a good bios, currently on 1303.

    Charged and titan i think use this one, share some info guys!

    I am @ 4ghz/2.8nb prime stable @ 1.45, really unstable in 4.1+
    Cpu:Phenom ΙΙ 965 c3 @ 4.1Ghz/2.8nb (air cooled)
    Mobo: Asus M3a79-T Deluxe
    Ram:A-data 2x2 800+ @ 1000
    Gpu:Asus Hd4850 512mb @ 700/1050(sycthe Musashi)
    Hdd:500gb Seagate 7200.11
    Psu:Corsair Hx620
    Cooling: TRue(dual fan)
    Case: Coolermaster Haf 932...

  18. #1468

  19. #1469
    Xtreme Addict
    Join Date
    Apr 2008
    Location
    Texas
    Posts
    1,663
    What changes in 1402? Did they fix the 13003 stability issues?
    Core i7 2600K@4.6Ghz| 16GB G.Skill@2133Mhz 9-11-10-28-38 1.65v| ASUS P8Z77-V PRO | Corsair 750i PSU | ASUS GTX 980 OC | Xonar DSX | Samsung 840 Pro 128GB |A bunch of HDDs and terabytes | Oculus Rift w/ touch | ASUS 24" 144Hz G-sync monitor

    Quote Originally Posted by phelan1777 View Post
    Hail fellow warrior albeit a surat Mercenary. I Hail to you from the Clans, Ghost Bear that is (Yes freebirth we still do and shall always view mercenaries with great disdain!) I have long been an honorable warrior of the mighty Warden Clan Ghost Bear the honorable Bekker surname. I salute your tenacity to show your freebirth sibkin their ignorance!

  20. #1470
    Xtreme Cruncher
    Join Date
    Apr 2008
    Location
    Ohio
    Posts
    3,119
    Quote Originally Posted by leoy View Post
    So any updates on c3 + this motherboard????

    I need a good bios, currently on 1303.

    Charged and titan i think use this one, share some info guys!

    I am @ 4ghz/2.8nb prime stable @ 1.45, really unstable in 4.1+
    I sold mine and not to long ago. Only DDR3 based boards now.
    ~1~
    AMD Ryzen 9 3900X
    GigaByte X570 AORUS LITE
    Trident-Z 3200 CL14 16GB
    AMD Radeon VII
    ~2~
    AMD Ryzen ThreadRipper 2950x
    Asus Prime X399-A
    GSkill Flare-X 3200mhz, CAS14, 64GB
    AMD RX 5700 XT

  21. #1471
    Registered User
    Join Date
    Jun 2009
    Posts
    2
    Here it is :

    M3A79-T Deluxe BIOS 1402
    Fix the issue that system may be unable to build RAID 0 or RAID 1 with certain Kingston SSD.
    Asus M3A79-T Deluxe BIOS 1001
    AMD Phenom II 940 Black Edition @ 3.4 ghz 1.4v (Cooler Master Hyper Z600 / Arctic Silver 5)
    G.Skill Extreme2 PC8500PK 2x1gb
    Sapphire Radeon HD4850 Toxic edition
    Thermaltake Tsunami VA3000BWA
    Cooler Master Silent Pro M600
    Western Digital Caviar Blue WD320AAKS

  22. #1472
    Xtreme Addict
    Join Date
    Dec 2002
    Posts
    1,467
    Quote Originally Posted by leoy View Post
    So any updates on c3 + this motherboard????

    I need a good bios, currently on 1303.

    Charged and titan i think use this one, share some info guys!

    I am @ 4ghz/2.8nb prime stable @ 1.45, really unstable in 4.1+
    Im on the 1303, I switched about 1 week ago it, works fine for me and I actually got a 100mhz increase in benching frequency going form 0903. So in other words In 3dm06 I was able to run 4.4ghz before, once I went to the 1303 I ran it at 4.5ghz (this is ice cooled water though).

    My rig is strictly benching and gaming so things like raid are not a concern for me. So I cant really comment on those issues.
    AMD 1090T@4.0ghz
    Enzotech sapphire/Mo-Ra extreme rad
    Asus Crosshair IV Formula
    ht 2400mhz / nb 2400mhz
    12gb Gskill 1300mhz
    HIS HD5970
    Enermax Evo Galaxy 1250
    case: XCLIO A380PLUS-BK

    4.61ghz water

    4.5ghz superpi 1M 15.585
    http://i271.photobucket.com/albums/j...rpi4500mhz.jpg
    25,396 06 Phenom 965@ 4.4ghz HIS 5970@960/1260
    21,893 Vantage, Phenom 965 4.2ghz HIS 5970 @960/1260

    Phenom 2 125w 965 test results
    http://futuremark.yougamers.com/foru...d.php?t=117414
    Phenom 2 140w 965 test results
    http://futuremark.yougamers.com/foru...d.php?t=109214
    Phenom 2 AM2+ 940 cold air results
    http://futuremark.yougamers.com/foru...ad.php?t=97430

    If I dont get every single drop out of my cpu I feel like someone is stealing from me

  23. #1473
    Registered User
    Join Date
    Nov 2007
    Posts
    6

  24. #1474
    Xtreme Enthusiast
    Join Date
    Oct 2007
    Posts
    504
    [ 1501 ]
    ----------------------
    Support new CPUs. Please refer to our website at: http://support.asus.com/cpusupport/cpusupport.aspx
    IQ_NOT_LESS_OR_EQUAL

    outdated hardware

  25. #1475
    Registered User
    Join Date
    Jan 2006
    Location
    Crete-Greece
    Posts
    91
    Quote Originally Posted by imamage View Post
    Just tried update from 0903 to 1303
    1303 is BAD , I used to run 230x16 stable , not with 1303
    I can't overclock the HTT ! It can't boot up with the same setting
    not even 205 x 16 , and the new BIOS broke the function of temperature reading of
    K10Stat , CoreTemp , Everest
    You can no longer able to read the CPU temp , all these software only show "0C" ( it works fine with 0903 )
    for your core temp

    I suggest AVOID getting 1303 , use the older version !!
    Had the same problem...i had 1203 with an x3 720 be unleash mode was cool, as i could unlock my extra core......i updated to 1501 cause i got an x2 555..the think is that anything above 210 x ? cant boot my pc.....with 1203 i was hitting 250~...so i got back to it...
    Last edited by DevilCry; 02-11-2010 at 03:38 PM.
    24/724/7

Page 59 of 65 FirstFirst ... 94956575859606162 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •