UnOfficial EVGA X58 Classified Owners Thread

[FabricioGS]

Mine won't pass 223 for anything in this world (i'm on air). I'm 99.5% sure it's my vga holding me back.

[webwilli]

i can´t pass 223 too. i think it is the cpu...

[Brian y.]

pci-e 103-110 and qpi sig compensation to less and your golden over 220 depending on cpu. Some need cold

[barrymaldon]

I've just traded in my P6T V2 in for a EVGA E760 but i'm having some issues getting to the same stable overclock I got with the asus. I previously had a 24/7 overclock of 21x213 with 1.3625v and everything apart from ram set to auto. the classified settings i'm running at the moment are

Voltage Control without v.droop
CPU VCore: 1.375
CPU VTT Vcore: +300
IOH PLL Vcore: 1.45
CPU PLL Vcore: 1.500
QPI PLL Vcore: Auto
DIMM Voltage: 1.65
IOH Vcore: Auto
IOH / ICH / I/O Voltage: 1.675
ICH Vcore: 1.050
VTT TWM Freq: 250khz
CPU PWM Freq: 940Khz
QPI Signal Comp. : Less

CPU Features
Turbo on
HT on

CPU Clock 20x
CPU host 210
MHC Auto
CPU Uncore AUTO
CPU Clock Skew 0ps
SpreadSpectrum Disabled
PCIE Freq. 105mhz

[Splave]

vtt looks high to me

[hiwa]

EVGA X58 Classified (E760/E761/E769) last bios

S61B Updates:

* Restores Bootup Logo
* Maximum Payload for PCIE
* SMART Fan Temperatures from 0 to 100C

BIOS updating can be accomplished VIA the below methods:

http://www.evga.com/forums/tm.asp?m=...1&key=�

[hausner]

EVGA X58 Classified (E760/E761/E769) last bios

S61B Updates:

* Restores Bootup Logo
* Maximum Payload for PCIE
* SMART Fan Temperatures from 0 to 100C

BIOS updating can be accomplished VIA the below methods:

http://www.evga.com/forums/tm.asp?m=...1&key=�

I hope they fix slow keyboard response time (aka LAG) too

[Jakethesnake011]

Juse ended up getting my New Classified 3 way in the mail yesterday, I have not even tried overclocking the beast yet, hope to see what I can achieve with this, over my old UD5

[Jakethesnake011]

I just got my classified installed last night and today I am trying to overclock it somewhat, I am having some trouble with the voltage settings using E-leet and even the BIOS, they are not being entered in correctly, or the read outs are wrong, my DRAM for example. I set it to 1.66V in BIOS and in E-leet although, the monitoring tab in E-leet shows DRAM at 1.72V and even HWmoniter shows the same read out. I also notice it with my QPI voltage, the VTT in BIOS is set to say +250Mv but in the E-leet read out I am getting 1.52V and then in another place I am getting 1.42V, so it is weird to have 2 different reading for a single voltage even using the same program...





Any ideas classified owners or anyone? I also ordered a new set of the Kingston Hyper X 2000 Mhz RAM the cas 9 timing one,not the real expensive kit, any news on how these clock and how tight you can get the timings on them?

[Viss]

Checked my volts with dim last night. Eleet monitoring is way of here (crazy high VTT/Vdimm). All volts (idle and load) were within 0,01v of what is set in bios.

@ Jakethesnake011, start with 1,30v for QPI and work your way up from there, 1.45v is not needed in most cases on Evga (or you must be running very high memspeed/uncore clocks).

[[200]]

lol

:eleet:

Got my 2nd spot back with this run,



My rig pic...

[Hellmann]

What memos areb these? Red Line?

[quattro_]

Hi,
this is my first x85 board so im still learning .
im having a weird problem, when i restarts i can hear a noise coming from the board until the the post stops checking, it stops before booting into windows it only happens when restarting not when i turn it on after a shutdown .
should i be concerned about it ?

please ignore, it turned out to be the GPU.

[[200]]

What memos areb these? Red Line?

Mushkin Redline Ascent XP3-12800

[hiwa]

Checked my volts with dim last night. Eleet monitoring is way of here (crazy high VTT/Vdimm). All volts (idle and load) were within 0,01v of what is set in bios.

@ Jakethesnake011, start with 1,30v for QPI and work your way up from there, 1.45v is not needed in most cases on Evga (or you must be running very high memspeed/uncore clocks).

hi Viss
are u using 760 or 759?

[hiwa]

Jakethesnake011 forget monitoring softwares, u have all Tension misuring points there,try a multimeter

when i set lower than 1.65/1.35 Vdimm/Vtt board don't drop
if i set higher than drop like 0.1 in idle and 0.2 in full load with 760 and latest bios

[Viss]

Hiwa buddy i have E760 now

[hiwa]

Hiwa buddy i have E760 now

if u still don't flash ur mobo, please do it soon, my E760 fly with last bios
i am really happy with this main, this is the first time i don't change mainboard for more than 3 months, really no need anything and look like great with I9 too, benched with over 100h lol and still works like a charm.

[Splave]

+1 latest bios is great, faster boots. The board just seems tighter. with b2b settings mem clocking almost feels like cheating!

[Viss]

S61B you guys mean? Stil using A here.

[Splave]

S61B yup

[raptor1]

i have found the problem for my shutdown-troubles

it is not the PSU!!!

Last night i try every bios setting and found that Virtualization Technology makes trouble.


If i activate VT, the PC shutdown after Windows reboot.

Can someone please try it?

+1`

happens when i have Virtualization Technology enabled in the bios

my psu is enermax galaxy 1000w

[sheaga]

i have a ? i'm thinking of getting this board but i need to know if i can run 2 4870x2's in it?

[Hellmann]

Yes you can

[sheaga]

COOL thanks