[QUOTE=eva2000;4050215]ouch, if you test each 2GB module individually how does each do ?
my friend i test and 1 stick 2g and the same again.7-8-7-20 1,65 real 1,69 30 wrong to mem test i try again with 1,74 real 1,79 evga classifiied E760 and again 20 wrong only with 9-9-9-20 nothing wrong!!!
its fail the rams and i ask ocz and tell me that ask the boss and tell me what happened
[SIGPIC][/SIGPIC]
my friend ocz i learn in greece hear have only that chips with black pcb with that icsOriginally Posted by hiwa
sent a kit like 2 weeks ago to rma, hope to get hypers
will post when they back
[SIGPIC][/SIGPIC]
My black PCB's worked fine till a few weeks ago... very good kit... but it had undergone some serious benching... one dimm fails now... other two have been used sunday in the SLI benching session... no hickups at all
on Blade series i think PCBs are all Black i tried a kit and see another friends kit all of them are old ics (848 batch )with black their proper pcb.
i have some plati series 1600 BBSE @ home and they have Blck PCB too.
i sent email about this to ocz and today answer me that the chips inside is not elpida hyper ,is elpida b die
o my god!
[SIGPIC][/SIGPIC]
please take a pic or tell us the serial number if possiblei sent email about this to ocz and today answer me that the chips inside is not elpida hyper ,is elpida b die
o my god!
the serial number of the rams chip i have write before some post.
the ram is 6gb ocz 7-8-7-20 16000 1,65 blade with black pcb!
serial OCZ 3B2000Lv6gk
[SIGPIC][/SIGPIC]
would the blade 2000mhz cas 9 sticks have hypers or bbse? possibly something else?
Yes Sir but they did not come out to good. I'll try to post on friday when I get out of work a little early. I sent them back for a refund. I confirmed with OCZ tech that these were the original hypers and not the new MGH. According to OCZ they have not purchased any new versions of the elpida hyper IC's.
I'm sticking with my mushkin 998707, 998691 and ocz animals 1333 microns which I'm running right now. They can out run the mushkins as far as mhz goes but with higher latencies of course.
Rig 1. X58 EVGA Class 760 (Rev 2.0), 970 Gulf, megahalems Rev B w/ 2 Scythe (110 CFM), EVGA GTX 570 SLI, Corsair AX1200 2 samsung F3r raid 0 WD Black 750 storage, 2 LG DVD RW, , Logitech G19, Cyber Snipa Silencer, log e5300 5.1 speakers, X-FI Fatality Pro SC, Haf X Ram 2 X 3 ADATA XPG V2.0 15000 @ 963 mhz cas7.
Rig 2. EVGA 780 FTW, Q9650 at 4 GHZ, thermaltake V1 copper cooler, WD 1TB, 750 and 500 HD's, 8 GB's OCZ Titanium 9200's, EVGA 285 GTX SLI, PCP&C 910, Sony DVD Burner and Rom, Logitech 5300 speakers, creative XFI Pro SC, Logitech G19 and G9 mouse, samsung 27" 1ms monitor, antec 1200.
Just a little start with my test starved animalsYes Sir but they did not come out to good. I'll try to post on friday when I get out of work a little early. I sent them back for a refund. I confirmed with OCZ tech that these were the original hypers and not the new MGH. According to OCZ they have not purchased any new versions of the elpida hyper IC's.
I'm sticking with my mushkin 998707, 998691 and ocz animals 1333 microns which I'm running right now. They can out run the mushkins as far as mhz goes but with higher latencies of course.
Rig 1. X58 EVGA Class 760 (Rev 2.0)
Rig 2. EVGA 780 FTW, Q9650 at 4 GHZ, thermaltake V1 copper cooler, WD 1TB, 750 and 500 HD's, 8 GB's OCZ Titanium 9200's, EVGA 285 GTX SLI, PCP&C 910, Sony DVD Burner and Rom, Logitech 5300 speakers, creative XFI Pro SC, Logitech G19 and G9 mouse, samsung 27" 1ms monitor, antec 1200.
old sticks are all Hyper, i am talking about 6/7 months ago sticks, the new sticks are all BBSE or maybe powerchip ..
According to OCZ there are no new chips they are all hypers. (7-8-7-20).
Rig 1. X58 EVGA Class 760 (Rev 2.0)
Rig 2. EVGA 780 FTW, Q9650 at 4 GHZ, thermaltake V1 copper cooler, WD 1TB, 750 and 500 HD's, 8 GB's OCZ Titanium 9200's, EVGA 285 GTX SLI, PCP&C 910, Sony DVD Burner and Rom, Logitech 5300 speakers, creative XFI Pro SC, Logitech G19 and G9 mouse, samsung 27" 1ms monitor, antec 1200.
16000 cl9 are Hyper?
yes but not mnh hyper which is the best from all and wants only 1,65 7-8-7-20 2000 and not 1,76
[SIGPIC][/SIGPIC]
AFAIK, OCZ Blade 2000mhz C7 and C9 are different memory ics. Pretty sure for 7-8-7-x they can only be elpida hyper whereas for c9 kits could be any ics that hit 2000mhz c9 i.e. elpida bbse, micron (animals) etc
---
some BBSE new DJ-F can handle 7-8-7-21 1.65 but 5% ?..
99.99.99% of 2000 Cl7 's are Hyper or MNH (old one) or MGH (last one)
BBSE with 7-8-7-21 @1,65VDimm
I neeed this Chips
Klick
Kingston HyperX PC3-16000 CL9 6GB @ 2224MHz
Sorry for my English
Good DJ-F can do itBBSE with 7-8-7-21 @1,65VDimm
I neeed this Chips
http://www.xtremesystems.org/forums/...&postcount=126
Thx
Kingston HyperX PC3-16000 CL9 6GB @ 2224MHz
Posting Permissions
Reply With Quote
Bookmarks