DFI LanParty X58 JR + I7 920/Single Stage

[Sav]

Hi guys, I and my friend Crash tested the DFI LanParty X58 JR with 920 C0 and Single Stage.

Config:
DFI LanParty JR X58 Bios 508
i7 920 C0
Asus GTX295
GSKill Trident 2000
Phase Change 1/2 HP by Dimas
Win Xp no tweaked



Max bclock is 225 MHz:





3DMark 2005 and Aquamark at 4600 MHz





For last test we overclock more the vga but our cpu score is low for 4600 mhz, I think for the high VTT voltage




Congrat DFI for this motherboard

[Gamer]

keep up the good work, LN² the bastard

[roller11]

Nice clocks, Sav...what were your load temps?

[Sav]

Tnx

Today it's very hot, I had 30 °C in room

4600 MHz:
Idle -15°C
Full 13-15°C with 3mark 2006

I think that we have not very good contact cpu/evaporator

[emo]

225Bclk, Same FSB Wall as mine.... Even use setfsb, no 1MHz higher

[M.art lover]

225Bclk, Same FSB Wall as mine.... Even use setfsb, no 1MHz higher

hoping for next bios ver arghhh

[Sav]

225Bclk, Same FSB Wall as mine.... Even use setfsb, no 1MHz higher

also for me, but we set max 1,37V on vtt and pci-e 107 MHz

[saaya]

low cpu score... hmmmmm have you checked if the current feedback to the cpu is disabled?
otherwise the cpu can drop to 20x if its under full load, several threads like in the cpu bench, and that results in lower scores...
im not sure how to check it besides rmclock... and then check after the run if the cpu clock dropped during the session...

for higher fsb... you probably need a mod on the chipset

[Sav]

tnx for the info

[eva2000]

wow nice..

Just started testing my DFI JR X58 as well on water cooled cpu nothing as cold as what you have

sascha for checking turbo mode if it sticks, check our Turbo Tool from Realtemp author http://www.xtremesystems.org/forums/...d.php?t=225450

[Pt1t]

I tested this board too with 920 too :

Here you got an impressive 2k6 cpu test done on air with old DFI bios some month ago !

[eva2000]

wow very nice D0 cpu 4660mhz at 1.44v with 84-88C load temps heh

[Sav]

I tested this board too with 920 too :

Here you got an impressive 2k6 cpu test done on air with old DFI bios some month ago !

Thank you

We lose 150/170 point

But this motherboard is very nice



P.S.
It's possible that our VTT is low?

[eva2000]

Thank you

We lose 150/170 point

But this motherboard is very nice



P.S.
It's possible that our VTT is low?

make sure 21x multiplier isn't throttling under load and dropping back to 20x multiplier

[Sav]

ok

[Mescalamba]

For FSB wall.. not sure if you tried, but from what I experienced, FSB wall is sometimes related to IMC settings, try higher CL and set tRFC to some insane amounts. And.. why not use some PCi-E OC? Like 115? Or its not possible with this mobo? Ofc, just my idea..

[Sav]

next time we'll try with low memory frequency and more oc on pci-e.

now we set 1800C8 and 107 mhz.

[Sav]

some updates with i7 975

very strange 2006 score I think the problem is the throttling

HT off


HT on




3dm 2005 and aquamark3







Max frequency with high bclock

[Sav]

update:

3DMark2006 32K done

5GHz HT Disable

[Unseen]

Nice cpu. Lucky you!

Maybe you should give it a try under ln2.

[maanyak]

I got 920 Do & DFI x58 JR too,so lovely cupple...
Did you test max bclk with new bios(508)...I passed 225 spi but not a valid link or SS,I'll try later when winter comes
room temp 23 C
21*217=4560MHz

[Sav]

My old 920 C0 did max 225mhz on SS

[clear cmos]

good ss, only 1/2 hp but can hold i7