Results 1 to 25 of 38

Thread: Gskill trident + ripjaws testing on AMD

Hybrid View

  1. #1
    3D Team Captain Don_Dan's Avatar
    Join Date
    May 2007
    Location
    Munich, Germany
    Posts
    4,199
    Quote Originally Posted by Smartidiot89 View Post
    Chew* how well do these sticks fare with tweaking? I know there is no way they can run stock on AMD at this time, but do you think these will do well with tight timings, or are there cheaper/better options for AMD?
    Cheaper and better options are most of the time two different things!


    Thanks for the tests chew*! Just to get that right, Tridents are BBSE, Ripjaws are PSC, correct?

    G.Skill has some serious problems with quality control on their Ripjaw kits it seems, I have read about so many DOA kits here and in some German forums...

    Quote Originally Posted by chew* View Post
    You can never have enough D9's.

  2. #2
    Xtreme Addict
    Join Date
    Dec 2008
    Location
    Sweden, Linköping
    Posts
    2,034
    Quote Originally Posted by Don_Dan View Post
    Cheaper and better options are most of the time two different things!

    Thanks for the tests chew*! Just to get that right, Tridents are BBSE, Ripjaws are PSC, correct?

    G.Skill has some serious problems with quality control on their Ripjaw kits it seems, I have read about so many DOA kits here and in some German forums...
    Fine

    Let me rephrase, what would Chew* recommend as benching sticks I can buy? The tricky part is I know all good ICs etc. but I really have no good computerstore near me where I can handpick a few good modules... So basically I am forced to buy expensive RAM with heatspreaders I suppose my budget is around $100-ish ofcourse cheaper is always better if possible, and I'd prefer ordering inside of EU or this shop: http://www.memoryc.com/
    SweClockers.com

    CPU: Phenom II X4 955BE
    Clock: 4200MHz 1.4375v
    Memory: Dominator GT 2x2GB 1600MHz 6-6-6-20 1.65v
    Motherboard: ASUS Crosshair IV Formula
    GPU: HD 5770

  3. #3
    Brilliant Idiot
    Join Date
    Jan 2005
    Location
    Hell on Earth
    Posts
    11,015
    Quote Originally Posted by Smartidiot89 View Post
    Fine

    Let me rephrase, what would Chew* recommend as benching sticks I can buy? The tricky part is I know all good ICs etc. but I really have no good computerstore near me where I can handpick a few good modules... So basically I am forced to buy expensive RAM with heatspreaders I suppose my budget is around $100-ish ofcourse cheaper is always better if possible, and I'd prefer ordering inside of EU or this shop: http://www.memoryc.com/
    If you want cheap benching sticks look for these......bet money they are d9 gts....your not going to find 2x2g 1800 6-6-6 in your budget though.

    http://www.newegg.com/Product/Produc...82E16820148223

    Little update......

    Tossed the tridents in my ASUS boots 1 stick.....refuse to boot with 2.....post code d5......played with timings....etc etc no luck. Will swap out with the rest of my asus boards to see if I can get one to boot.....

    Might add all my asus boards are currently pending RMA.....etc they all have issues to start with.
    Last edited by chew*; 09-22-2009 at 11:57 AM.

  4. #4
    Xtreme Addict
    Join Date
    Dec 2008
    Location
    Sweden, Linköping
    Posts
    2,034
    Quote Originally Posted by chew* View Post
    If you want cheap benching sticks look for these......bet money they are d9 gts....your not going to find 2x2g 1800 6-6-6 in your budget though.

    http://www.newegg.com/Product/Produc...82E16820148223

    Little update......

    Tossed the tridents in my ASUS boots 1 stick.....refuse to boot with 2.....post code d5......played with timings....etc etc no luck. Will swap out with the rest of my asus boards to see if I can get one to boot.....

    Might add all my asus boards are currently pending RMA.....etc they all have issues to start with.
    Thanks Are those guaranteed D9GTS? As said before there is no way I can go and handpick sticks
    SweClockers.com

    CPU: Phenom II X4 955BE
    Clock: 4200MHz 1.4375v
    Memory: Dominator GT 2x2GB 1600MHz 6-6-6-20 1.65v
    Motherboard: ASUS Crosshair IV Formula
    GPU: HD 5770

  5. #5
    Brilliant Idiot
    Join Date
    Jan 2005
    Location
    Hell on Earth
    Posts
    11,015
    Quote Originally Posted by Smartidiot89 View Post
    Thanks Are those guaranteed D9GTS? As said before there is no way I can go and handpick sticks
    At 1.9 specced voltage they can't be much else than GTS.
    FYI the 2000 kits were specced 9-9-9 2000 1.9v.....
    Last edited by chew*; 09-22-2009 at 09:47 PM.
    heatware chew*
    I've got no strings to hold me down.
    To make me fret, or make me frown.
    I had strings but now I'm free.
    There are no strings on me

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •