X48 Rampage Formula Preview.

[leo27]

I've just been tightening up my memory timings (memory is in sig).




I'm 11 passes memtest for windows and 50 passes linx stable with these memory settings, the rest are the same as previously.

I haven't run a P95+UT2004 pass on it as yet i'm not sure if that is necessary if only the memory has been changed, would it be advisable??
Are there any timings i could tighten further??

also
@Earzz
I would try just doing a clear CMOS like A-Grey said but reinstall Bios 902. Eliminate one thing at a time in this case a bad bios flash.

[Earzz]

@Earzz
I would try just doing a clear CMOS like A-Grey said but reinstall Bios 902. Eliminate one thing at a time in this case a bad bios flash.

Well clearing my cmos solved the problem that it was showing count 2.
Now im on 3570 Mhz with 1.264 VCore (real) 1 hour OCCT stable, gonna let it stress test now overnight for 8 hours.
Really strange because all my old known stable OC settings dont work anymore, its really picky now with the settings and i doubt it that i will reach a stable 3700 Mhz.
For sure i wont be able to run it anymore with a VCore of 1.288 but i still will try to get my Xeon C1 back on that speed.

[leo27]

if your still on Bios 902 don't forget to set the nb and CPU clock skews they can help with stability