-
imo, thats a nice OC for air cooling. The Prolimatech Megahalem was the heatsink I was thinking about. Can you tell me a little more about how you have your voltages setup? Is 4.5Ghz your 24/7 OC and what temps do you get?
Wrote batch number down at home, forgot to bring it to work 
I will also get some screenshots when I get home.
Specs are below, not bad with a stock cooler!!
Trying to decide if I want to screw with water again or just go with a good air cooling setup. I have a MCP-600 and MCP-650 pump, a Dangerden and Weapon heater core both with shrouds and about 10 Sanyo Denki San Ace fans (all from my old setup). I just bought a Apogee GTZ but have yet to even open it.
Tried 185X21 with 1.2125vcore and 1.25625 vcore and it errors out on LinX in about 30minutes. Kept other voltages below the same. Probably getting too hot!!!
Any suggestions?
Thanks,
Ed
Last edited by ed.howell; 09-15-2009 at 03:45 AM.
920 DO @ 4200Mhz 210X20 1.35Vcore HT on, everything except Turbo enabled!!
MCP600--Dangerden heatercore--Apogee GTZ--Weapon heatercore back to the pump with a T-line. All fans are 120mm Sanyo Denki San ace's
Gigabyte GA-X58A-UD3R, 6GB Corsair XMS3 1680Mhz 8-8-8-24 1.666V, QPI-3780Mhz, NB-3360Mhz
2 Evga 460 Superclocked EE's in SLI
BFG EX1200Watt PSU
Windows 7 Ultimate 64bit
5.5TB Internal HD space!!
2 Seagate external HD's totalling 2.5TB's
HAF 932
2600K @ 4.5GHZ 1.280Vcore
16GB Gskill Ripjaws 1600Mhz 8-8-8-24-2T 1.5V
1 Evga 570 SC, 1 Evga 260 SC (Physics)
PCP&C 750Watt Mk II PSU
Windows 7 Pro 64bit
2x120GB Gskill Sniper SSD RAID0
2x1.5TB WD Black Sata III RAID0
HAF X
Heatware
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Reply With Quote
Bookmarks