Can anyone rate the primochill Typhoon III?

[millertime359]

What kind of coolant can i use for T3? since the Feser One can erode the T3?

I really want the red color!

PC Ice with a red dye bomb.

[BoxGods]

The metal plugs that come with the T3 are a bit big (to my eye anyway) when the face plate is installed. There are smaller diameter rounded ones that look better, and also the clear LED plugs that come with it (but leave the cap off) look pretty good too.

I drew up a very simple and slightly smaller metal plug but it will be a while before they arrive.



not too expensive either. May want to order those or extra clear LED plugs if your using the 2 that come with the T3.

http://www.primochill.com/primochill...sl=EN&currency

[canadiantire]

The metal plugs that come with the T3 are a bit big (to my eye anyway) when the face plate is installed. There are smaller diameter rounded ones that look better, and also the clear LED plugs that come with it (but leave the cap off) look pretty good too.

I drew up a very simple and slightly smaller metal plug but it will be a while before they arrive.



not too expensive either. May want to order those or extra clear LED plugs if your using the 2 that come with the T3.

http://www.primochill.com/primochill...sl=EN&currency

Can someone post some pics show the T3 in dark with LED?

I confuse how to put the LED at front

[millertime359]

Can someone post some pics show the T3 in dark with LED?

I confuse how to put the LED at front

You use those clear plugs, place the LED in the hole, thread the cable through the slot on the cap and tighten the cap down.

Then just loop the wire back into the machine and plug it in.

[Artemis]

PC Ice with a red dye bomb.

Do you know if I would still need Biocide like PT-Nuke with that? I plan on getting blue.