Dragon F1

[Duniek]

Man get that garbage out of my thread. Thats about to get clown nuked by the sucka patrol. Thats not an F1 holdown, that a piece of dense foam with 5 holes in it lol.

Avoid knockoffs kids.. and ALWAYS buy genuine F1 replacement parts!
Here is the real next gen F1 holdown which now supports all previous sockets as well as 1156 now and ships with every new F1 starting next week.
http://www.overclockingpin.com/p55%20mounting%20f1.jpg

relax man, I made 4 of it only bcoz few persons in EU have benching contest this week so they need them asap, and probably your mount will be not arrived on time


I should silent here but can't
Do you have monopoly to making mounts for your pots?, I can make mountings for each pot i want, and somebody can make for my pots and I am not angry, sometimes I am sending DWG cad files to person which want make it by your self and dont have time to wait for shipping

also reason is on funds too, of course yours is "always the best" but even my CRAP mounting with good hands will be works the same

[[XC] riptide]

relax man, e

Duniek. if you have wares to ply... ply them in your own threads/classifieds. I can't deleted you picture because I don't mod this section, but I'll give you the opportunity to delete the post yourself before someone less chartable than me comes along and deletes it. There is no DI & LN mod online at this time... but there will be very soon.

[Duniek]

Duniek. if you have wares to ply... ply them in your own threads/clssifieds. I can't deleted you picture becasue I don;t mod this section, but I'll give you the oppurtunity to delete the post yourself before someone less chartable than me comes along and deletes it. There is no DI & LN mod online at this time... but there will be very soon.

deleted
are you happy now?

[[XC] riptide]

deleted
are you happy now?

... like a pig in shyte.

[Duniek]

oh thats good
bcoz for w while i thought your post is kind of ironic

[[XC] gomeler]

Man get that garbage out of my thread. Thats about to get clown nuked by the sucka patrol. Thats not an F1 holdown, that a piece of dense foam with 5 holes in it lol.

Avoid knockoffs kids.. and ALWAYS buy genuine F1 replacement parts!
Here is the real next gen F1 holdown which now supports all previous sockets as well as 1156 now and ships with every new F1 starting next week.

Looking good Vince! Eventually you are going to end up with a mount that is just a mesh

[Marco André]

I really want and need that F1 holdown that supports LGA1156

[Oliver]

Looking great Vince, Dragon quality & design

[Hazzan]

I want one ......

[TMWH]

Looks good as always Vince!

[Marco André]

I want one ......

x2
When will be it available for purchase?

[Kal-EL]

Man get that garbage out of my thread. Thats about to get clown nuked by the sucka patrol. Thats not an F1 holdown, that a piece of dense foam with 5 holes in it lol.

Avoid knockoffs kids.. and ALWAYS buy genuine F1 replacement parts!
Here is the real next gen F1 holdown which now supports all previous sockets as well as 1156 now and ships with every new F1 starting next week.

Nice work Vince, and we can still order this seperately?

[k|ngp|n]

Updated on the site already man

[eligray]

I've got my RE almost entirely insulated, and can't wait to put an e8600 and my F1EE to work on it.

I expect that the F1EE will make things 100x easier than my old solid copper mousepot with ~1cm deep base

[k|ngp|n]

So I got this F1 Nickel plated a few months ago by a local place to see what was up with the whole process, different types of plating, whats best for what we do, etc, etc. It sat for a while and I never got to finish fully putting this particular surface finish through its paces. This is ELECTRO-LESS Nickel. It is different that electrolytic which leaves more of an uneven finish in the corners and pits. Electro-less leaves a much more uniform finish and it is consistently even throughout the part. It's also a thinner layer of nickel that is left.
The surface finish is really the concern and dictates what process to use as any imperfections in the finish can be magnified. Surface prep is key for sure.
This light finish is more of gunmetal type finish slightly dull, but really looks nice overall witht eh way we prepped it I think. I am doing some load testing with it first to make some determinations about coating internals before going ahead with it on all the pots I make....but this could be thel deal if testing goes OK. I wont sacrifice the perf of the pot for some bs plating and I never was a huge fan of it ot begin with There are alot of ways around putting plating in specific areas of the pot, thats not an issue. It's wether or not it is worth it to even do so. Needs to be tested so we'll see soon
First ever pictured nickel F1?? I know some guys have seen this at my shop 3 months ago so you don't count lol but I have yet to see a plated pic of one on the internet though...no??

[[XC] gomeler]

Looking good man

[Vapor]

You could use one these Gom...yours is brown as a turd

[[XC] gomeler]

You could use one these Gom...yours is brown as a turd

From use and abuse..

but not as brown as Gautam's

Plus, it doesn't matter what color it is when it is covered in a layer of ice!

[TheGoat Eater]

I want - this is the F1EE I want to buy LOL -looks great! now if I can get the extension tube plated as well LOL

[Hazzan]

Beatiful....I like the colour.....

[k|ngp|n]

Beatiful....I like the colour.....

2+ months freezing/unfreezing/torching in the lab and it still looks pretty much like it did when I got it back from the the plating guy.

[chispy]

Very nice looking Pot Vince , performance with looks to kill .

Angelo.

[sofos1990]

Very nice looking, indeed
Looking forward to your tests Vince.

[chew*]

Vince,

Looks cool man. Preety much a permanent finish then eh?

Considering the intended use for F1 is controlling temps I don't think it will matter on intel....., it will probably make a -1% diff running flat out on AMD which will be near impossible to measure due to variation in meters, mounts, IHS.....

Anyway looks sweet especially since you prepped it prior to sending it out.

[k|ngp|n]

Vince,

Looks cool man. Preety much a permanent finish then eh?

Considering the intended use for F1 is controlling temps I don't think it will matter on intel....., it will probably make a -1% diff running flat out on AMD which will be near impossible to measure due to variation in meters, mounts, IHS.....

Anyway looks sweet especially since you prepped it prior to sending it out.

Its pretty permanent so far and holding up nicely. Yah spot on about the temp stuff. I think it will be negligible. I am more concerned with the repeated torching and how the nickel influences when it goes "supernova" as u say