Gigabyte GA-P55-UD5 hits 272 BCLK

[hicookie]

if you have been trouble with new cpuz, try cpuz 1.51 or
intel frequency tool, that will show the real multiplier.

[Dinho Fatal1ty®]

WooooooooooooW 7Ghz On i7 coming son..\ioi/

[Pt1t]

Someone got F5a bios for UD6 ?

[Marco André]

Not sure how bad my effiency is but...

[[XC] gomeler]

Can anyone link me to the F4D or latest BIOS for the P55-UD6 and P55M-UD4? Both boards came with F3 and both boards are hitting 209-211 bclk walls on air.

[Chri$ch]

@ [XC] gomeler

Bios isn´t the problem, my UD5 hit 228Mhz BCLK (i5) with F3 Bios as all my Boards with my CPU.

It´s you CPU, most like it cold to reach higher BCLK

Btw my retail 860 (week 25) hit also a wall at ~210Mhz.

Edit: UD6 F4 Bios

http://www.gigabyte.com.tw/Support/M...S&FileID=14977

[hicookie]

@ [XC] gomeler

Bios isn´t the problem, my UD5 hit 228Mhz BCLK (i5) with F3 Bios as all my Boards with my CPU.

It´s you CPU, most like it cold to reach higher BCLK

Btw my retail 860 (week 25) hit also a wall at ~210Mhz.

Edit: UD6 F4 Bios

http://www.gigabyte.com.tw/Support/M...S&FileID=14977

yes, recent all BIOS can do the same BCLK, notice my 272 managed in July
which BIOS only around F1, the point is when you put CPU cold
that will be very different with air cooling.

[hiwa]

ICH is under cold for 260/270 hicookie?
may you tell me exactly what's different between UD5 and UD6?
PS: i don't care bundle

[Pt1t]

ICH is under cold for 260/270 hicookie?
may you tell me exactly what's different between UD5 and UD6?
PS: i don't care bundle

Power button isnt @ the same place

[hiwa]

Power button isnt @ the same place

oh big fault, so i can't turn on mobo easy ? designer should change this layout soon

[Pt1t]

oh big fault, so i can't turn on mobo easy ? designer should change this layout soon

so ud5 doesnt have 24 power phases, no diagnostic led and only 4 dimm

[hicookie]

ICH is under cold for 260/270 hicookie?
may you tell me exactly what's different between UD5 and UD6?
PS: i don't care bundle

not need ICH cold, just cold cpu
UD5 12 phase, UD6 24 phase, UD6 features 6dimm slots
to let you have more chance be fexliable for choose memory, like you
can buy 2kits of x58 1GBX3, also you can install normal p55 with 2gbx4

[Eeky NoX]

Such fun by reading your jokes mates ...but when could I boot those stuffs for real ??

I have a little question about mounting holes ^^ would we have some fix for that new socket ?
(I bought TT and CM ones for X58 but I'm ouned now : just wanna P55 :p )

[RPGWiZaRD]

Can anyone link me to the F4D or latest BIOS for the P55-UD6 and P55M-UD4? Both boards came with F3 and both boards are hitting 209-211 bclk walls on air.

Did you try higher PCI-E frequency? That usually helps, already at 102 - 103 you usually gain at least a few more MHz on BCLK.

[[XC] gomeler]

Did you try higher PCI-E frequency? That usually helps, already at 102 - 103 you usually gain at least a few more MHz on BCLK.

I was running 112MHz PCIe, just like I do on my Classified I'm guessing I need to put the CPU sub-zero, I'll do that next week.

[BaRaN]

Gigabyte X58 can beat that!!

285 Bclk DDR3-2850 DDR3


350 Bclk DDR3-2800



Just glitches with Everest is all, they even say that in the thread you linked

I have a 431 Bclk pic somewhere but can't find it yet

what the fake result even i now the i7 can't beat 270!! there is only few result that can go upper then 260!

and the i7 because of memory controller the 2800 is only one dream is cpu already dead after this result

any one now the fake !?
im sure it bug of Everest

[hiwa]

what the fake result even i now the i7 can't beat 270!! there is only few result that can go upper then 260!

and the i7 because of memory controller the 2800 is only one dream is cpu already dead after this result

any one now the fake !?
im sure it bug of Everest

that's a simple Everest bug is not a fake i have 40k screen
i think it happens when you boot @ high Bclk like 225 or higher and you run direct everest without change bclk with tools

ps:
i see your PM my friends, we will talk about later

[Lsdmeasap]

Yes, I said that was everest known bugs, we (Several members) posted out bugged images on that page where you quoted my images.

Just a glitch with everest is all

[3oh6]

Did you try higher PCI-E frequency? That usually helps, already at 102 - 103 you usually gain at least a few more MHz on BCLK.

I was running 112MHz PCIe, just like I do on my Classified I'm guessing I need to put the CPU sub-zero, I'll do that next week.

ladies, PCI-E frequency shouldn't affect BCLK on P55, QPI bus isn't the limiting factor like it is on X58 and why PCI-E frequency helps X58 BCLK. i am running a P55-UD4P at 245BCLK all day long at 101 PCI-E and piss all for VTT...with P55, BCLK is all about the CPU. add cold and max BCLK, not much else you can do from there

[[XC] gomeler]

ladies, PCI-E frequency shouldn't affect BCLK on P55, QPI bus isn't the limiting factor like it is on X58 and why PCI-E frequency helps X58 BCLK. i am running a P55-UD4P at 245BCLK all day long at 101 PCI-E and piss all for VTT...with P55, BCLK is all about the CPU. add cold and max BCLK, not much else you can do from there

Did it out of habit. Will add cold to the mix soon, hope this chip doesn't have a garbage cold-bug. Someone needs to test PCIe scaling also.. I wonder how high it'll go before stuff starts crapping out.

[Tiesto]

"I think Biostar has figured out how to run 300BCLK, they can now buy our board in retail stores"

Uh-oh!

Can Biostar really run at 300 BCLK?

[stasio]

lol, you got beta faster than me

GA-P55-UD6 - F5c
GA-P55-UD5 - F5d

-Improve OC ability

Released 09.Sep 09

[saaya]

so these high bclocks only work at subzero and on air we are stuck at the same bclocks? 210 on air but close to 300 cold? thats odd 0_o
whats the max stable 3d bclock under cold then?

[M3kk]

@stasio

Any new bios for P55-UD3 ?

[ovard]

My UD5 with F5d bios ABSOLUTELY wont accept a BCLK of more than 160 :/ Hoping its the BIOS and not the board/CPU.

Anyone else with this problem?