So can you control uclk and mem multipliers? People were expressing problems earlier in the thread, and were very happy when 1403 beta was released which allowed full control over Xeons.
I was hoping Asus would by now have non beta BIOSes giving full support for Xeons, but their website seems to indicate that they do not.
On R2E, Yes we can!Originally Posted by CryptiK
Windows 7 Ultimate 64bit, SP1 Power By:
Asus Rampage IV Formula
Intel SBE 3930K
Gskill RipJaws Z 14900 (1866 DDR3) 16GB 10-11-10-24
EVGA 570 GTX SLI
SSD Samsung P830 240GB
Corsair AX850
Great, what BIOS are you on?
Rampage II Extreme 1504 BIOS
1. Updated configuration table of OC Station.
2. Fixed Target DRAM Frequency incorrect for DDR3-1333 with non-extreme CPU when set
DRAM Frequency to auto in BIOS setup.
3. Supported display warning message when set CPU Voltage or QPI/DRAM Core Voltage
over 1.8V in TurboV.
http://www.asus.com/product.aspx?P_I...Mih&templete=2
Windows 7 Ultimate 64bit, SP1 Power By:
Asus Rampage IV Formula
Intel SBE 3930K
Gskill RipJaws Z 14900 (1866 DDR3) 16GB 10-11-10-24
EVGA 570 GTX SLI
SSD Samsung P830 240GB
Corsair AX850
Great thanks. Glad to hear the w3540 is fully supported by this bios.
I do prefer the R2E for a 24/7 system board, I didn't want to have to choose another board due to lack of full xeon support.
I run my w3520 @ 4.34ghz 24/7 np
Rampage II Extreme 1504 BIOS
1. Updated configuration table of OC Station.
2. Fixed Target DRAM Frequency incorrect for DDR3-1333 with non-extreme CPU when set
DRAM Frequency to auto in BIOS setup.
3. Supported display warning message when set CPU Voltage or QPI/DRAM Core Voltage
over 1.8V in TurboV.
http://www.asus.com/product.aspx?P_I...Mih&templete=2
TurboV runs on W7 ?
Apple MacBook Air
Apple IPad 2
Yes, I installed it in compatabily mode (vista) and it then runs fine in Win 7.
Main Rig;
Asus Rampage II Ex, i7 920DO @ 3.64, 12 Gb Corsair Dominator DDRIII, Corsair H-70, Corsair 1 KW PSU, 2 ea EVGA 580's in SLI driving 3 Samsung 245t's at 5760 X 1200 surround, Boot drive Corsair Vertex II SSD, Programs 2 V- Raptors in RAID 0 and a WD 1 Tb RE3 for files and client data. Sound, ASUS Xonar D2X, Normal optical drives Etc. Win 7 Ult.
Did that also, didnt work last time i tried!
Tonight it did, weird
Tnx
Apple MacBook Air
Apple IPad 2
Yes it works perfect in W7 on my system also
| ASUS REII || i7 920 || 6GB G.Skill DDR3 16000 Perfect Storm || Sapphire"VAPOR-X" HD 4890 CF || DELL U2410 ULTRASHARP 24 || Corsair 850HX || Samsung F1 1TB x 4 || Seagate7200.12 1TB x 2 || 3 x OCZ 30GB Vertex @ Raid0 || Pioneer DVR-216D || G15V2 || MX518 | Qpad XT-R || Win 7 |
| Obsidian 800D || HK Rev. 3.0 LT || BP BF AIX58NSE || BP BF MOS AMOS II || BP BF MOS AMOS III || MCP655 + EK X-TOP Rev.2 || EK-Multioption RES 250 Rev.2 || Tygon R3603 || XSPC RX360 + Yate Loon D12SL-12 || BP Compression Fittings 1/2in. || T-Balancer/bigNG |
On Asus ftp site there is version 1.0.41 for Vista and Win7 and obviously it works.
If I remember correctly, if you use relative Vcpu (BIOS 15xx), using Turbo V reverts it to absolute.
site is down.. ill get it when its back on .. tnx !
Last edited by AceBaran; 09-02-2009 at 08:48 AM.
Apple MacBook Air
Apple IPad 2
You remember where on the ftp server you found this new version?
Asus Rampage II Extreme (1504)
i7 920 @ 210x21 4.4ghz 1.37v/1.26vtt 3849A916 HT on
6GB G.Skill Trident 16000 Elpida BBSE @ 6-7-6-20 1682mhz 1.55v
GTX 295 Single PCB @ stock :<
HK 3.0 Copper, MCR320, Laing DDC 18w, XSPC Res Top: 38c Idle / 73c Load
Posting Permissions
Reply With Quote
Bookmarks