"ASUS P5Q Deluxe discussion".

[Leeghoofd]

I never ran 8GB long term mate, I only did some tests at start for n7 on request and that was only at 400FSB or such... better pm him to get more info...

But thing I have with giving advice in templates : use it as a starting point, it could work from the start but also could be unstable... I see many users pump so many volts into the NB. I dunno why coz I never had to run above 1.36, not even for 600FSB action with the E8500. Quads and loads of ram usually need more Nb voltage and a bit more FSB term then dual cores... mostly it will be up to proper GTL tuning to get it rockstable (keep it around +/-0.81 level, seemed to work for most users)...

I haven't touched these boards since the 15xx serie biosses... no idea what has changed for the good or the bad...

[davidkozat]

Hi guys i have purchase a P5Q Deluxe and am using with no problems sinces 2 months now and i got a Q6700 @ 3.9 Ghz just wondering if it was possible to go any higher as i got some frends which are hitting 4.5... 450 X 10...

my settings are this:

390 X10

Cpu V 1.68
Cpu GTL auto (both of them)
Cpu PLL 1.64
FSB V 1.8
NB V 1.5
NB GTL auto
SB V 1.5

if anyone knows if you can go higher on this board ill be very thankfull

[Martin.v.r]

Q6700 ? high voltset you got there ,PLL max 1,55 on Deluxe

[davidkozat]

Q6700 ? high voltset you got there ,PLL max 1,55 on Deluxe

well if you remove the onboard pins you can achive a higher voltage frequency... could you tell me the volatges you have selected on your system as i can see that we have the some spec?? thanks mate

[Marvin]

Çoveçy board.
Can run my Q9550 E0

[Leeghoofd]

Hi guys i have purchase a P5Q Deluxe and am using with no problems sinces 2 months now and i got a Q6700 @ 3.9 Ghz just wondering if it was possible to go any higher as i got some frends which are hitting 4.5... 450 X 10...

my settings are this:

390 X10

Cpu V 1.68
Cpu GTL auto (both of them)
Cpu PLL 1.64
FSB V 1.8
NB V 1.5
NB GTL auto
SB V 1.5

if anyone knows if you can go higher on this board ill be very thankfull

any particular reason you are pumping so many volts ? I suppose you can go far lower on FSB term and NB voltage

[scharnhorst]

Çoveçy board.
Can run my Q9550 E0

Only 1.256 for vcore? STable?
Amazing
Could you give us your bios adjustments please?

[Padol_Inc]

@marvin

can you share your bios settings? i run my Q9550 @ 1.4v its way to high.. tia.

[Marvin]

of corse.
vcore 1.258
vdim 1.9
pll 1.54
fsb term 1.32
northbrige : 1.34v
GTL north :0.65
both vcore gtl : auto

[Padol_Inc]

BTW bro what mems are you using? DDR2 1066 or 1200? thanks..

[Marvin]

using ddr2 1100
regards

[davidkozat]

anyone got higher than 4.0 Ghz on this board with the Q6700, if so could you write down you voltages on the bios? please

[Leeghoofd]

Ever thought that ya CPU is the limiting factor ? it is not because you pumps insane volts that the CPU will go higher...

Try first 9 X and stabilise 400FSB

400 X 9

Cpu V 1.5
Cpu GTL auto (both of them)
Cpu PLL 1.6
FSB V 1.3
NB V 1.3
NB GTL auto
SB V 1.5

You're volts are so out of line that it wil not help stability at all

[davidkozat]

Ever thought that ya CPU is the limiting factor ? it is not because you pumps insane volts that the CPU will go higher...

Try first 9 X and stabilise 400FSB

400 X 9

Cpu V 1.5
Cpu GTL auto (both of them)
Cpu PLL 1.6
FSB V 1.3
NB V 1.3
NB GTL auto
SB V 1.5

You're volts are so out of line that it wil not help stability at all

Thanks for your reply ....

am using a multiplier of 10 as i though i wouldnt need to increase the voltage on the cpu as it would increase temps but i though using 9 it would mean higher temps as i would have to increase the FSB to aichive a higher clock anyway just curious to see if this chip would higher than 4?? but ill get a new one like the Q9550?? anyway my current set up is:

390 X 10

Cpu V 1.68
Cpu Gtl auto
Cpu Pll 1.72
Fsb V 1.70
NB V 1.5
NB Gtl auto
SB V 1.4

it runs at 50c
65c at load but that cos am watercooling...

[Martin.v.r]

4GHZ whit Q6700 G0
http://67.90.82.13/forums/showthread...89437&page=209

[Leeghoofd]

Thanks for your reply ....

390 X 10

Cpu V 1.68
Cpu Gtl auto
Cpu Pll 1.72
Fsb V 1.70
NB V 1.5
NB Gtl auto
SB V 1.4

it runs at 50c
65c at load but that cos am watercooling...

Lower them FSB term volts to 1.3-1.4, NB to 1.3 plz, SB volts AUTO, no need to whack voltages like that...

Also it's not because ya friends Q9700 do 4.5 ( pretty hard to believe anyway for 24/7) that yours can do 4.5... and that Vcore really is not a good sign that this is a good CPU either, but with the volts you gave it , who can blame the CPU

Lower first the multi to 9, stabilize 400FSB , rams at 1000Mhz ( very important on P45 to get off the 1:1 divider for stability) with the lowest Nb and FSB term volts possible, then hunt for 4ghz...

[cincyrob]

ok guys im close to the buying stage now. i have ruled out the ga-ep45-ud3p. i am going with a ASUS mobo. but which one???
P5Q or P5E MOBO???? which is better/ why?

http://www.newegg.com/Product/Produc...page=4&bop=And

[davidkozat]

before having the P5Q dlx i use to have the P5Q i have to say it a solid board pleanty of room for OC and i prefer the P45 NB, but if you are gonna Xfire then choose the X48 as it will run 2 ati better the only reason i would go fir the deluxe is cos of the 16 Phase cooling ....

[davidkozat]

Q6700
Ned help here,to hit 4.1+ GHZ bug whit strap mem,can only run whit 333 ??
There are also temporal error in bios 114.4c ,ned to Dis.. this in bios,This error has not been with E8600 or QX6850/bios 1702 ????

hi Martin.v.r

what are your voltages on the BIOS i cant to seem to have it stable enough thanks dude

[cincyrob]

before having the P5Q dlx i use to have the P5Q i have to say it a solid board pleanty of room for OC and i prefer the P45 NB, but if you are gonna Xfire then choose the X48 as it will run 2 ati better the only reason i would go fir the deluxe is cos of the 16 Phase cooling ....

well im not a gamer(well not like most) so i seriously doubt i will ever gor xfire.and the P5Q Deluxe is gonna be the route i take... im hopeing to order it this weekend. if not this one next weekend for sure...

no another Question. is the P5Q Deluxe a easy board to learn as far as bios and ocing goes? or is a amature like myself gonna have problems?

[davidkozat]

well im not a gamer(well not like most) so i seriously doubt i will ever gor xfire.and the P5Q Deluxe is gonna be the route i take... im hopeing to order it this weekend. if not this one next weekend for sure...

no another Question. is the P5Q Deluxe a easy board to learn as far as bios and ocing goes? or is a amature like myself gonna have problems?

2 OCing lol good choise dude with this board you can pretty much learn yourself without that fear of thinking did that stresed the board too much?? nah man this board if very well built the 16 phase cooling asures that the transistor are wel packet and cooled and you can get some crazy OC done with this board spaecially Core 2 quad chips liek mine... so good luck matey

[cincyrob]

this is my first build but ive had 4 different gigabyte boards and now switching to a Q9550 and this new mobo i am going for my second build once said and done. just getting the parts 1 ata time takes a little longer. i am excited about getting this board.

[Leeghoofd]

go at least with the P5Q-E or Dlx Cinycrob. The P5Q lacks some tweaks in the bios and has lesser memory support (unless you use one of KET's modded biosses) but you will still remain more limited. Take note that with a quad for high FSB action it might be better to go UD3P. My Dlx did 500FSB with my quad BUT you will need to have good rams to get off that 1;1 divider and at 500FSB only way to go is 1200Mhz for the rams !

[cincyrob]

thats some good info leeghoofd. i havent had it broke down like that. that does sway things again.... i guess i truely cant go wrong with either board huh??? what 1200mhz ram would you recomend??

[Leeghoofd]

not many choices for 4Gb mate, good bang for the buck are the OCZ blades 9600, high end and more expensive the Gskill 9600Pi rams