Cooler Master HAF 932

**will_s** · 08-01-2009, 07:42 PM

Seriously considering this case but just one question.

I have Crossfire setup with 2 4890 vapor-x and the top one ( gets the hot air from the bottom one as well ) runs way to hot.

So am hoping that with the big fan on the side of the case this will let things run cooler

Anyone notice imporovement with GPU temps ?

**will_s** · 08-01-2009, 08:00 PM

Originally Posted by EagleRock

My case

I have the same PSU and this answers a lot of questions. I know now houw I will route the cables and they will fit

absolutely brilliant :-)

**EagleRock** · 08-01-2009, 11:30 PM

I'm happy to help

**will_s** · 08-02-2009, 01:34 AM

Originally Posted by EagleRock

I'm happy to help

well they say a pic is worth a thousand words

**will_s** · 08-02-2009, 10:26 PM

ok, my first problem with the case. I like the PSU at the bottom but it means my GPU wont fit in the bottom pci-e slot. I guess I will have to go with the 2nd pci-e slot and hope the card doesnt run to hot ( the gap between cards is approx 5mm ) and the side fan gets enough cool air on to it

**SwIeRsZcZ** · 08-05-2009, 09:23 AM

Does anyone know what is the spec. of rear 140mm fan ?? I mean CFM airflow

**GAR** · 08-05-2009, 09:51 AM

Originally Posted by SwIeRsZcZ

Does anyone know what is the spec. of rear 140mm fan ?? I mean CFM airflow

60cfm

**paul_** · 08-05-2009, 04:45 PM

Wow, some of these builds are great, I certainly know that I'll be re-doing my first ever paint job over winter break

**SwIeRsZcZ** · 08-06-2009, 05:12 AM

Do you use spray paint or what ? I am goin to paint my interior black but still wonder what method

**paul_** · 08-06-2009, 08:13 AM

I used spray paint, but I didn't sand between coats

**oakenfoldsg** · 08-07-2009, 04:47 AM

**SwIeRsZcZ** · 08-12-2009, 09:13 AM

Would triple rad (Feser Xchanger Triple Radiator 360) fit on top in this case ??

**breathemetal** · 08-12-2009, 01:35 PM

AMAZING oakenfoldsg

**PakaPaka** · 08-12-2009, 03:20 PM

Originally Posted by breathemetal

AMAZING oakenfoldsg

and

**LuckyNV** · 08-13-2009, 01:52 AM

Welcome to XS, oakenfoldsg!

Very impressive HAF there!

**Anemic** · 08-13-2009, 04:12 AM

Thats one sweet looking case oakenfoldsg, but please resize your pictures. They are a bit big...

**oakenfoldsg** · 08-13-2009, 04:33 AM

Thank You Guys,

actually i brought a used HAF932, which is in a very bad condition at its paint, which i bring it for a powder coating

**SwIeRsZcZ** · 08-15-2009, 10:30 AM

What grain did you use to sand interior before applying primer ?? 1000 ? more ?

**oakenfoldsg** · 08-16-2009, 05:03 AM

I send it to a professional to do the job for me, so what ever detail, I'm not very sure.

**SwIeRsZcZ** · 08-16-2009, 05:14 AM

Anyone who did it by yourself ??

**mrod** · 08-17-2009, 08:59 PM

There are some very nice looking HAF 932's on here

**paul_** · 08-20-2009, 10:44 AM

Very good work oakenfoldsg, if I had to nitpick I'd say that you should mod your LEDs one way or another, red or blue. With the white case and the skull theme, I would vote red.

but that paint job is second to none that I have seen for a HAF

**mrod** · 08-20-2009, 08:20 PM

Here's a quick shot of my set-up ....

**oakenfoldsg** · 08-21-2009, 08:36 AM

Originally Posted by paul_

Very good work oakenfoldsg, if I had to nitpick I'd say that you should mod your LEDs one way or another, red or blue. With the white case and the skull theme, I would vote red.

but that paint job is second to none that I have seen for a HAF

Thanks for the compliments, i do agree that red is the best choice to go with my setup.

current planning to cut the mesh on the side panel and replace with a arcylic.

Originally Posted by mrod

Here's a quick shot of my set-up ....

Nice setup too.

**Onoff312** · 08-21-2009, 09:02 AM

Oaken i hate HAF's but that makes me want to buy one.

Thread: Cooler Master HAF 932

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions