Got an E8600 running for quite some time now, and thought I'd share some results.
I am not unhappy with this chip but it doenst compare to some chips I had in the past, it needs a lot of volts. It's a Q820 with 1.25 VID. System in sig.
Any suggestions for improvement? Would like to hear some.
FSB 440
Multiplier 10
Vcore +375Mv (=1.408v under load)
Vdroop control enabled
PLL volt 1.55v
FSB term 1.15v
NB Volt 1.3v
GTL 0/1 0.61
GTL 1/2 0.61
NB GTL 0.58
DRAM Volt 2.1v
333/1057
Bookmarks