Retail Q9650 Overclocking Thread

[derek0309hk]

Room temp is 21C or 70F

so my wc system seems really having a problem

when i get room temp at 25~26, i get 45~48 on core at idle at 4.4@1.4125v in bios

and not even have to mention full load, what is your temp under prime95 or ibt?

thanks!

[TooFastForYa]

Hoss, tried that template. Wouldn't even boot with 1.8 vdimm. Upped it to 1.9 and booted. Failed prime after 2 test. Temps look good however. Here is a screenshot. Three of my cores don't read under 37 as you can see. One that does read 27C at idle.

[TooFastForYa]

I just tried upping the vdimm to 1.94 and that gave me a bsod when I ran prime.

[KRich]

Hoss, tried that template. Wouldn't even boot with 1.8 vdimm. Upped it to 1.9 and booted. Failed prime after 2 test. Temps look good however. Here is a screenshot. Three of my cores don't read under 37 as you can see. One that does read 27C at idle.

I get the 'Prime95 Application Error' when VCore is too low, but not low enough to cause a 0x000000124 BSOD.

Try increasing VCore a few notches and see if it removes that particular error.