MA790X / MA790XT-UD4P 790X bugs fixes etc etc.....

[jlacy76]

Pci-e is set to auto, htt at 2000. I have tried many drivers, but not th oens you said.

I installed at PCI card and win 7 found it and installed it. No luck on connection.

I just bought a USB D-link DUB-E100 and it installed from the disk and I can now connect. I'll see if I can find that Lan Driver and set pci-e to 100.

Set pci-e to 100 and it connected! Who would have thought?

Now I just need to figure out how to take it past 3.6.

[gOtVoltage]

Pci-e is set to auto, htt at 2000. I have tried many drivers, but not th oens you said.

I installed at PCI card and win 7 found it and installed it. No luck on connection.

I just bought a USB D-link DUB-E100 and it installed from the disk and I can now connect. I'll see if I can find that Lan Driver and set pci-e to 100.

Hope it works...Anyways gigabyte has come a long way...Im happy to say im liking thier newest mobos over Asus ATm .. Bioses and Customer/RMA support way better.

The Biggest thing was the Double layer Mobos and price for performance. Ive used Asus for five years and some Biostar inbetween. By far im having most fun with these New Gigas.

I will be getting another but DDR3 soon , looking for that OPENBoX special

[jlacy76]

You were right, win 7 driver did not work. For whatever reason, I did connect a few times, then would not connect again. I'm using the Vista 64 driver and it connected, at least for now. Thanks for help me.

I'm stuck at 3.6, I might be able to do 3.7 if I drop the ram mulit to 333 and run loose timings but 3.8 is not reachable even at +275. I'm only running ddr2 800 but I have had it over 900 on my asus board. Nothing I have tried though will get me past 3.6ish. I can run 3.6 at 800mhz 4-4-4 or 3.7 at 667 5-5-5.

Any suggestions or am I done?

[jlacy76]

Lan failed again, I'm back up the usb ethernet connection.

My settings at 3.7
18.5x200
CPU NB freq. x13 (2600)
HT Link width - Auto
HT Link Freq. - Auto

Northbridge Volt control - +03 (1.4)
Southbridge Volt Control - +.01 (1.3)
CPU NB VID - +.250
CPU Volt control +.250

My ram is running at 800 4-4-4-18-2t

[jlacy76]

Ec Firmware set to Hybrid
ACC set to all cores
Value All cores -2%