Quote Originally Posted by Scooby View Post
@bito, sure thing. This works for me, you may have to adjust your memory setting if your using a different speed ram.

RIIE Bios setting Bios 1502

AI overclock - manual
OC from CPU level up - auto
OC from Memory level up - auto
CPU Ratio setting - 21
CPU Turbo Power Limit - enable

CPU configuration
CPU Ratio Setting - 21
C1E Support - disable
Hardware prefetcher - enable
Adjacent Cache line prefetcher - enable
Intel Virtualization tech - enable
CPU TM Function - enable
Execute Disabled bit - enable
Intel HT Technology - enable
Active Processor Cores - all
A20M - disabled
Intel Speedstep tech - disable
Intel Turbo Mode tech - (Not shown if Speedstep is disabled)
Intel C-STATE tech - disabled

BCLK frequency - 215
PCIE frequency - 100
DRAM frequency - DDR3-1723MHz
UCLK frequency - 3448MHz
QPI frequency - 7759MT/s

Dram timing control
1st iformation - 10-9-8-20, the rest in auto
2nd information - 1N, the rest in auto
3rd information - All feft in auto

EPU II phase control - full phase
Load-line calibration - enable
CPU differential amplitude - auto
Extreme OV - disabled

Current voltage - what ever is posted
CPU Temperature what ever is posted
CPU Voltage Control - Absolute (VID)
Cpu voltage - 1.34375
CPU PLL voltage - 1.81592
QPI-Dram voltage - 1.34375

Current voltage - what ever is posted
NB/SB Temperature what ever is posted
IOH voltage - 1.11341
IOH PCIE voltage - 1.51106
ICH voltage - 1.11341
ICH PCIE voltage - 1.51106

Current voltage - what ever is posted
DRAM Bus voltage - 1.51106
DRAM REF voltage - auto

Debug mode - string
Keyboard TeakIt comtrol - disabled

CPU spread spectrum - disabled
PCIE spectrum - disabled
CPU clock skew - auto
IOH clock skew - auto


Hope this helps. I'm not responsible if you blow up you room.
those are some insanly low voltages for such a high overclock scooby great job bro

is that atleast bench stable?