Galaxy 9800GT Voltmod

[Cecil]

Well i ve no idea for the hard mod u r looking for but i d strongly recommend u put some heatsinks on those VRMs before u try anything like voltmodding!!!
U wouldnt want to finally achieve the mod and then have your card die cos of overheating would u?!!!

Have two MCW-60s and Sythe sinks for both cards. Just dont have them on yet.

Can you get the model numbers of all the chips please

Sure can, will post back with them.

Oh, and will 10k VRs work? Its all radioshack by me had.

[Cecil]

Some of these were way to small to be 100% right, some 5s might be Ss and some 8s might be 6s etc...
http://i26.tinypic.com/29fy1x2.jpg


Incase the picture was blurry,
Far Left : RT9259A / PSBCC13

Bottom Right : AT88SC / 08(or 6)08C / .V(or U) 0836
Top Right : ATMEL912(hardest one to read, M may be H) / 25F512AM / 5(or S)U27
Far Right : 8BF9TVK / ACT08

If its possible its one of the other chips lmk, they just didnt look like they would be it.

[Cecil]

The left one's datasheet says its the PWM controller, so I assume thats it then?
http://www.alldatasheet.com/datashee...K/RT9259A.html


Pin 4 and 7 measure 570 OHMs.


Found a review of an identicle cards, except in the review there is no 6 pin connector, and there is on mine. And mine are stock at 600/900 clocks.
http://hardwarebistro.com/index.php?...r-512MB-Review