Good luck, that would be killer to see.Originally Posted by dpa
Here we go!Any backups? Who knows.
Good luck, that would be killer to see.
Here we go!Any backups? Who knows.
@AndreYang : INSANE....................
okey..
COULD the classified 760 coldbug before the 759...?
I have NO chance in h ell of reaching even -130.. I ran at -145 before. exact same settings.
i have test just one Classified 759 , coldbug at -120°/-125° with 4 x i7 D0 (but the cpus were better at -90°/-100°
Iam now limited to about -105C under load.. sucks.. testing some uncore;
Neither do I. I'll be cleaning this up in a little bit...
yes it's depends of cpu ,it's "generally" best between -90/-100 ° but there is always the exception that proves the ruleIam now limited to about -105C under load.. sucks.. testing some uncore;
my 975 make 5.45ghz at 3dmark05 between -99° and -105° (under my caskade 2 stages) but I need to test under LN2 soon for see the best temp for it (maybe -90°, maybe -120° or more) the i7 are strange with the cold (because of control memory and I think maybe other things) ...
I have removed the ES discussion not because there was anything wrong with it, but because it doesn't belong here. Hope you guys understand.
new record at 150Mhz lower cpu clocks, trying high uncore..
Nice score! little bit more tweaking an you got 38k!
That is so nice... Wish i had a system like that to play with, but ill have to stick to 2D for a while
iam giving it hell tomorrow, hoping for 38k.
edit; pic for l.oco
Last edited by dpa; 07-22-2009 at 03:01 PM.
Oh! Oh!
Uncore looking very good!
Where courage, motivation and ignorance meet, a persistent idiot awakens.
Thanks a lot, 4th card is really tempting
Impressive uncore
VTT?
Thx
1.62v I think.Impressive uncore
VTT?
Thx
bumping the coreclocks on gfxs gives boost in GT3/4.. Petri, where is your 1200Mhz bios???
1200Mhz core would give a 270fps GT3 with clocks at 5.4Ghz, maybe even more..
maybe that huge vtt is making the cold bug come earlier or maybe you are using more/less vcore than you used to.1.62v I think.
bumping the coreclocks on gfxs gives boost in GT3/4.. Petri, where is your 1200Mhz bios???
1200Mhz core would give a 270fps GT3 with clocks at 5.4Ghz, maybe even more..
This is heading somewhere!
How's the new insulation working out?
I admire your determination to get that WR dpa !
Excellent results man, keep pushing it, you are almost there
PC: Intel Core i7 920 D0 | Kingston Hyperx T1 6GB 2000Mhz 8-8-8 RAM | Foxconn Bloodrage GTI | Sapphire 4870X2 | Perc 5/i - WD 640AAKSx4 RAID0 | Asus 2014L1T | Dell 2407WFP | Lian Li G70 Silver Watercooled
WaterCooling: Q² Project by The-Fox
CPU Loop: Swiftech Apogee GTZ | Feser X-Changer 480 | Swiftech MCP655 Vario w/ DetroitAC top | EK Multioption RES 250 Rev.2 | Tygon R3603 1/2" | YL D12SL@1350RPM x4
GPU Loop: EK-FC4870 X2 Nickel | Swiftech MCR320 | Swiftech MCP655 Vario w/DetroitAC top | EK Multioption RES 150 Rev.2 | Tygon R3603 1/2" | YL D12SL@1350RPM x3
minor setback.. the eleet profiles is NOT working as they should!
https://www.evga.com/forums/tm.asp?m=653551
The change takes about 8-9sec.. so I tried everything from cpu test to canyon flight. the problem is not the change I believe, its just that the fps goes -+5 ALL the time. places where the fps should be steady 160, the fps is 160-155-160-155-160-155.. any tips? I have a CLOSE to 38k score if this works like it should
Higher uncore?
* ELEET saves ALL your settings at the current point of time of 'save profile', and will start polling every voltage etc according to this profile when you hot key it. Now, if all you want is to change clockspeeds, then go into your ELEET directory, under profiles folder, open up the profile with a notepad. Delete away all the voltage adjustments, this will shorten a time to load a profile.
i added this info
-edit oops sorry somehow i edited your post!!! I didnt know i can do that!!
Last edited by LardArse; 07-23-2009 at 05:13 PM.
finally!!
* ELEET saves ALL your settings at the current point of time of 'save profile', and will start polling every voltage etc according to this profile when you hot key it. Now, if all you want is to change clockspeeds, then go into your ELEET directory, under profiles folder, open up the profile with a notepad. Delete away all the voltage adjustments, this will shorten a time to load a profile.minor setback.. the eleet profiles is NOT working as they should!
https://www.evga.com/forums/tm.asp?m=653551
The change takes about 8-9sec.. so I tried everything from cpu test to canyon flight. the problem is not the change I believe, its just that the fps goes -+5 ALL the time. places where the fps should be steady 160, the fps is 160-155-160-155-160-155.. any tips? I have a CLOSE to 38k score if this works like it should
Higher uncore?
* ELEET saves ALL your settings at the current point of time of 'save profile', and will start polling every voltage etc according to this profile when you hot key it. Now, if all you want is to change clockspeeds, then go into your ELEET directory, under profiles folder, open up the profile with a notepad. Delete away all the voltage adjustments, this will shorten a time to load a profile.
i added this info
-edit oops sorry somehow i edited your post!!! I didnt know i can do that!!
38K is yours soon.
Jeez your smokin haak38k is yours for sure. Try higher uncore yet?
so mr.uncore.. you want me to go higher than 5000Mhz NB freq..?Jeez your smokin haak
LardArse: thanks for the input on freq. do you have any tips on the fps not being steady..?
Posting Permissions
Reply With Quote
Bookmarks