The E0 Q9550 SLB9V thread (finally!)

**vws** · 07-16-2009, 01:51 PM

Originally Posted by cincyrob

heres a shot of core temp and the vid. id say i got me a good OC'er right?

Nice VID...

so was this screenshot taken when all 4 cores were fully loaded and none of them was idle? Some CoreTemp versions would show dynamic VID states so their values might depend on the load.

**cincyrob** · 07-16-2009, 03:47 PM

that was taken right after i used dvd-rebuilder. it wasnt underload. plus my ambient temp in the house was about 82f and where i have my system it is under a desk so it is a little warmer under there. have had the AC off the pass couple days its been nice and cool here. any ways.lol
that was at idle i can check it again tonight underload and see what it says. i do have it now running 3.0ghz small oc for now being new and all. leave it there for 24hr and in the morning i will bump it up to 3.2ghz i did notice all my settings are still in auto but with the little OC, underload the vcore has dropped from 1.210v to 1.185v is this normal? iknow of vdroooop with these gigabyte boards i had t oset my E8400 to like 1.365v and it would drop to like 1.265v. but i thought taht was a wolfdale thing???

**road-runner** · 07-16-2009, 04:13 PM

Got this one today its on a crappy DS3 P35 motherboard I had laying around for crunching, air cooling, and does not seem to want to go over 440 on this board, it is batch L844B610.

**monza1412** · 07-16-2009, 04:37 PM

Originally Posted by road-runner

Got this one today its on a crappy DS3 P35 motherboard I had laying around for crunching, air cooling, and does not seem to want to go over 440 on this board, it is batch L844B610.

looking good

Now get one UD3P and give the sucker some volts

**cincyrob** · 07-17-2009, 04:45 AM

http://valid.canardpc.com/show_oc.php?id=605440

got it up to 3.2ghz all settings still in auto.

**cincyrob** · 07-17-2009, 07:42 AM

well i couldnt hold back, here ya go.

**lordmagnum** · 07-17-2009, 11:45 PM

I'm gonna rise the VTT, what is the voltage that I don't have to exceed ?

**bigwill68** · 07-19-2009, 08:04 AM

Sense me and My friend CincyRob are neighbors and compare notes

I almost missed the bus with my results at 3.5Ghz's on a old P35 board

Well my Results are in on this Old Board p35c I'm kinda glad kept it around for a backup board...I wanted to check it first to see what it would do, nothing added all at auto setting running 64 bit Xp Pro Tests where done on External case was not included...lol nexts week its the I45 turn to see it act with the Quad Jumper...Pics to follow

Intelburntest (Passed) Maxs stress 5 Passes

Vid is sweet

other links to pics with work in progress

temps
http://img174.imageshack.us/img174/9487/realtemp.jpg

orthos & screen shot
http://img204.imageshack.us/img204/9...screenshot.jpg

setup work station
http://img521.imageshack.us/img521/4469/1000271o.jpg
http://img174.imageshack.us/img174/7460/1000267.jpg
http://img204.imageshack.us/img204/6212/1000265.jpg
http://img174.imageshack.us/img174/5599/1000258.jpg
http://img174.imageshack.us/img174/1911/1000256c.jpg
http://img174.imageshack.us/img174/5715/1000261.jpg
http://img111.imageshack.us/img111/6524/1000252q.jpg

http://valid.canardpc.com/show_oc.php?id=606327

all said and done the Q9550 is back in the box resting waiting on
the next test with I45 hoping to do well

Have Fun
Building

**cincyrob** · 07-20-2009, 07:43 AM

took it up again.
vcore in bios set at1.275v actuall during stressing 1.18-1.232v so still very love on vcore plenty of room for more when needed.

**monza1412** · 07-20-2009, 08:25 AM

pretty low vidders there

Have fun, both of you

**road-runner** · 07-20-2009, 08:31 AM

Originally Posted by monza1412

looking good

Now get one UD3P and give the sucker some volts

I got a couple of them, going to take the E8600 off of one as soon as I get time and stick the Q9550 in there...

**cincyrob** · 07-20-2009, 01:09 PM

ok im at the point my mem is holding me back. these crucial ballistix ddr2 800 isnt gonna take much more OC. anyone got any suggestions on some good mem to run on my mobo(GA-EP45-DS3R) DONT LAUGH i know its a crap board. i just had to have the first P45 gigabyte board when it came out..lol in a month or so i will be stepping into a ASUS P5Q Deluxe. so any ideas on some good mem to help me get to 4.0+???

**OC Nub** · 07-20-2009, 03:11 PM

Was looking through some ss's I had saved. I love this 9550. Best CPU I have owned I believe.

**spinejam** · 07-20-2009, 05:30 PM

that's a great chip OC Nub!

**OC Nub** · 07-20-2009, 05:36 PM

Thank you.

**monza1412** · 07-20-2009, 05:58 PM

Originally Posted by cincyrob

ok im at the point my mem is holding me back. these crucial ballistix ddr2 800 isnt gonna take much more OC.

your kidding me right? What memory divider are you using?

Originally Posted by cincyrob

in a month or so i will be stepping into a ASUS P5Q Deluxe. so any ideas on some good mem to help me get to 4.0+???

I strongly suggest you to grab the UD3P/R bud. 500fsb hassle free.

**monza1412** · 07-20-2009, 06:00 PM

Originally Posted by OC Nub

Was looking through some ss's I had saved. I love this 9550. Best CPU I have owned I believe.

Im speechless mate, that chip is really something.

**cincyrob** · 07-20-2009, 06:48 PM

Originally Posted by monza1412

your kidding me right? What memory divider are you using?

I strongly suggest you to grab the UD3P/R bud. 500fsb hassle free.

im useing the 333mhz strapping and the 2.00d.
im not to sure i want another gigabyte board. ive had 4 of them and have had nothing but problems with them. i think it might be time i give another manufacture a shot..lol

my mem now is runnng at 872mhz. i dont think it could handle 900mhz for any amount of time. i hav eno faith in these crucial ballistix ddr2 800 i have RMA'd them 3 times

**monza1412** · 07-20-2009, 07:10 PM

Originally Posted by cincyrob

my mem now is runnng at 872mhz. i dont think it could handle 900mhz for any amount of time. i hav eno faith in these crucial ballistix ddr2 800 i have RMA'd them 3 times

Im sorry, but its a 2gb kit or a 4gb kit?
If its a 2gb kit are double sided? (check the number after the dot that I mark in the picture, starts with 16 or 8?)

**cincyrob** · 07-20-2009, 07:46 PM

2 gig kit and single sided

**monza1412** · 07-20-2009, 07:53 PM

Originally Posted by cincyrob

2 gig kit and single sided

doh. that sucks

If you are looking for a 4gb kit, the low volts ocz blades would be my choice.

**spinejam** · 07-20-2009, 08:17 PM

these look good right now too!

http://www.amazon.com/dp/B002845LDC/...0&linkCode=asn

**OC Nub** · 07-21-2009, 03:51 AM

Thank you monza.

**cincyrob** · 07-21-2009, 04:14 AM

well i tried it at 4.0===no go
tried it at 3.83======no go

back at 3.7ghz just fine. my mem cant handle 902mhz at 3.83ghz it would load windows but as soon as i tried to stress test it, it would fail and shut down.
so in due time i will be getting me some 1066 mem.

**Dadi_oh** · 07-21-2009, 11:44 AM

Originally Posted by cincyrob

just got mine tonight along with a OCZ Vendetta 2 cooler and some OCZ freeze
my batch #L846B715

anyone have one of these chips? how is it?

man why am i all of a sudden hearing alot of people say the Q9550 EO isnt any good?
bad batch or jsut over all no good?

I just got that same batch number today but can't try it out until Thursday. How did you do?

I will have it under the same OCZ Vendetta 2 on a Biostar I45 T-power P45 motherboard.

Thread: The E0 Q9550 SLB9V thread (finally!)

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions