Originally Posted by Barso
The 2 inlets closest to the pump should look different from the outter 2. If im correct there was a extra chamber that pushed the water into the pump with force. So the 2 closest to the pump would be the inlets.
I haven't gotten mine yet, but if I remember correctly then this should be right ^^
Other way round - outlets closest to the pump
It was the other way around indeed
http://www.watercoolinguk.co.uk/foru...8&postcount=31
I used teh holes in the front as outlets
"Thing is, I no longer consider you a member but, rather a parasite...one that should be expunged."
Funny DB.I used teh holes in the front as outlets
You CAN actually use those two ports on the front as an additional pair of inlets btw.
There are times when that could be handy.
This is the easiest way to fill a loop ever I should add. crazy easy
"Thing is, I no longer consider you a member but, rather a parasite...one that should be expunged."
How do I mount the reservoir in the front of the coolermaster cosmos s?
The drive slots are in the way and stop the reservoir being mounted.
Was wondering when this one would come to light.
Basically you need to cut the little tabs off the case which isn't ideal but is doable though i think it should have been in the design of the T3 to have a groove, front to back like the XSPC res
I just flattened mine. I only had to do the front ones as the rear ones clear.
The LEDs go into plastic hole plugs. I didn't see any other place to mount them.
Posting Permissions
Reply With Quote
Bookmarks