MMM
Results 1 to 25 of 988

Thread: Core i7 920 rev D0 stepping 5 :)

Hybrid View

  1. #1
    Xtreme Addict
    Join Date
    Feb 2005
    Location
    USA
    Posts
    1,692
    If you can get your hands on several 3844A717 SLBEJ (D0) packing date 2/20/09...would you guys do it? I believe those are the very first D0 batch that went through the transition from C0 to D0, the earlier 3844A are of C0 and the later 3844A became D0.
    Core i7 920 D0 3844A717 4.40Ghz HT on @1.36v (LinX/Prime/3D stable), Corsair 850W, 12GB OCZ Platinum 1600, P6T Deluxe V2, EVGA GTX 285 SS, OCZ Vortex SSD 30GB x3 RAID0, HAF 932.
    Water Cooling Setup: XSPC RX360, MCP355 + XSPC Res Top, Swiftech GTZ, 1/2" Tygon, Scythe S-Flex SFF21F push, 20mm yateloon D12SL-12C pull.


    Opteron 148 CABNE 0528 GPMW 3.1Ghz @1.6v Prime Stable. Westy 37" LVM-37W3, DFI Venus 975, 2GB TeamX Cronus Micron, GSkill HZ, Sapphire X1900XTX, Zippy 700W, X-Fi Xtrememusic, 36GB Raptors x2 @Raid-0.
    WC Setup: PA120.3 +Shroud, MCP655, STORM, MCW60, 1/2" Tygon, mini res, Yate Loon.

  2. #2
    Xtreme Cruncher
    Join Date
    May 2007
    Location
    Conroe, Texas
    Posts
    3,010
    Quote Originally Posted by ben805 View Post
    If you can get your hands on several 3844A717 SLBEJ (D0) packing date 2/20/09...would you guys do it? I believe those are the very first D0 batch that went through the transition from C0 to D0, the earlier 3844A are of C0 and the later 3844A became D0.
    Picked up a 3844A717 this morning, threw it in the classified and run 20 passes linx at 4.4Ghz with 1.375 vcore, not a bad chip I guess.


  3. #3
    Xtreme Addict
    Join Date
    Feb 2005
    Location
    USA
    Posts
    1,692
    Quote Originally Posted by road-runner View Post
    Picked up a 3844A717 this morning, threw it in the classified and run 20 passes linx at 4.4Ghz with 1.375 vcore, not a bad chip I guess.
    mine is similar....4.40Ghz only needed 1.368vcore in LinX, but Prime95 crashed in 6hr with 1.387v and needed 1.40v for 10+hr run. 3844A717 runs much cooler than the 3849A that I had.
    Core i7 920 D0 3844A717 4.40Ghz HT on @1.36v (LinX/Prime/3D stable), Corsair 850W, 12GB OCZ Platinum 1600, P6T Deluxe V2, EVGA GTX 285 SS, OCZ Vortex SSD 30GB x3 RAID0, HAF 932.
    Water Cooling Setup: XSPC RX360, MCP355 + XSPC Res Top, Swiftech GTZ, 1/2" Tygon, Scythe S-Flex SFF21F push, 20mm yateloon D12SL-12C pull.


    Opteron 148 CABNE 0528 GPMW 3.1Ghz @1.6v Prime Stable. Westy 37" LVM-37W3, DFI Venus 975, 2GB TeamX Cronus Micron, GSkill HZ, Sapphire X1900XTX, Zippy 700W, X-Fi Xtrememusic, 36GB Raptors x2 @Raid-0.
    WC Setup: PA120.3 +Shroud, MCP655, STORM, MCW60, 1/2" Tygon, mini res, Yate Loon.

  4. #4
    Registered User
    Join Date
    Mar 2008
    Posts
    2
    Quote Originally Posted by ben805 View Post
    mine is similar....4.40Ghz only needed 1.368vcore in LinX, but Prime95 crashed in 6hr with 1.387v and needed 1.40v for 10+hr run. 3844A717 runs much cooler than the 3849A that I had.
    Curious to know - did you have a 3849A866?

    I saw both at MC - the 3844A717 and the 3849A866 and after doing some research, it seemed that the 3849A866 was able to clock higher with lower voltages than the 3844A

  5. #5
    Xtreme Addict
    Join Date
    May 2004
    Posts
    1,046
    Quote Originally Posted by road-runner View Post
    Picked up a 3844A717 this morning, threw it in the classified and run 20 passes linx at 4.4Ghz with 1.375 vcore, not a bad chip I guess.
    Yeap, I saw a bunch of them at my local MC.
    Asus Rampage II Gene, Xeon W3550 D0 Mushkin PC3-2000 6GB, BFG 9600GT OC 512MB DDR3
    Asus A8N32-SLI Deluxe 1.01G, AMD A64 4000+, 2x1GB Ultra PC-3200, EVGA 7600GT 256MB DDR3
    Asus MA378-T with AMD Athlon 64 X2 7850
    ECS 945GCT-M/1333 v3.0, Intel Celeron E1400, MSI 8500GT 256MB DDR3
    BIOStar P4M900-M7 Rev. 7.0, Intel Celeron 440, 1GB Kingston, 6600LE
    Gigabyte M61PME-S2P with AMD Athlon 64 LE-1660, EVGA 8500GT 1GB DDR2

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •