So, 300L for 5,5h of benching at 10€ per liter equals 3000€ per 5,5h or close to 600€ per hour.
To be honest, it's not thát bad. All you need to do is pre-test a dozen of chips on LN2 and use the best one for your single LHe session.
So, 300L for 5,5h of benching at 10€ per liter equals 3000€ per 5,5h or close to 600€ per hour.
To be honest, it's not thát bad. All you need to do is pre-test a dozen of chips on LN2 and use the best one for your single LHe session.
Where courage, motivation and ignorance meet, a persistent idiot awakens.
damn lhe is expensive >_< ...
but we like the results
5 hours is not bad, u can do a few runs
Kill one 975 and you lost more money![]()
Where courage, motivation and ignorance meet, a persistent idiot awakens.
to all you "masters of cold" here's warm recommendation! A must see documentary: http://www.pbs.org/wgbh/nova/zero/program.html
amazing movie, please watch it chapter-by-chapter, or find full (as highest as possible quality) movie... it's best two hours you can spend.
Adobe is working on Flash Player support for 64-bit platforms as part of our ongoing commitment to the cross-platform compatibility of Flash Player. We expect to provide native support for 64-bit platforms in an upcoming release of Flash Player following the release of Flash Player 10.1.
Hey man, did you suggest taking the picture because some of these guys were giving off some weird vibes beforehand and you figured you were safest BEHIND the camera?? That is the only excuse I will accept from you paisan!
I just started looking for lhe last week, I can get it for around 15usd per liter. Only thing that sucks is that it comes on a truck to my Ln2 place and based on the quality of the vessel + whenever they filled it originally, there can be loss. They said I still have to pay for "ordered amount" and not "delivered amount" Yah for sure I learned the more prep work you do on LN2 the better, have everything ready to go for your final runs when you run lhe.
Looks like these guys had it down like a machine and the results show it.
It's inspirational and giving me that twitch to run again.![]()
TWKR tested by Sampsa & elmor
Sweet package!
Picture of TWKR CPU when it was still alive. R.I.P.
On Saturday I started benching 3DMark Vantage with TWKR while other guests were having a small competition. I prepared a system with Asus M4N82 Deluxe (nForce 980a SLI) and two GeForce GTX 295 in Quad SLI. As I posted already earlier, I got P28426 in Vantage when CPU was running @ 5,7 GHz and GFX @ 700/1600/1235 MHz. This motherboard didn't seem to work very well under LN2. I had huge issues running NB above 3 GHz, HT ref. clock wasn't working very well above 215 MHz and vcore worked very strange above 1,65V. Anyway, I managed to run Vantage CPU-tests @ 5,9 GHz and even @ 6,0 GHz but when I was taking screenshot the system suddenly shut down and mobo + TWKR CPU died..
On Sunday elmor & me started testing another TWKR CPU with Gigabyte GA-MA790FXT-UD5P. Northbridge was ok up to 4,4 GHz and we ran 3DMark05 & 3DMark06 @ 6160 MHz. Running whole tests @ +6,2 GHz was problematic although CPU seemed to scale pretty well with vcore. We used 1,8 - 1,95V in our tests. Two ATI Radeon HD 4870 X2 were running at pretty low clocks (787/900 MHz):
3DMark05: 46843
3DMark06: 34916
After these tests we were done with TWKR and started preparing our system for liquid helium.
Favourite game: 3DMark
Work: Muropaketti.com - Finnish hardware site
Views and opinions about IT industry: Twitter: sampsa_kurri
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
[CENTER]The post counter is not an intelligence meter!Originally Posted by Massman
MAX11L - "It's like a console...with the suck turned down and the awesome turned up" -tet5uo
Heat Team IRONMODS
After we sacrificed a chip and board to the OC gods it seemed we got a good one. We used one of my duds just to be safe.
http://www.xtremesystems.org/forums/...0&postcount=66
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
Nice TWKR results elmor and Sampsa.Sorry about the chip's death, looked like a nice sample.
I'm sort of curious though, about the configuration choice for the record-setting rig. Why not 4890's, especially with SF3D's new BIOS fix?
Last edited by Gautam; 07-07-2009 at 05:31 PM.
We ran out of time. First time I could test 4890 under LN2 was thursday night and the event started on Friday.
We just have to check few more things, before we will start using those cards. This "fix" bios might also be delayed a bitSorry!
Well.. I have seen some talk about bios modifying in 3D section, so maybe people don't have to wait this one![]()
You are as good as your samples are!
My DDR2 Results:
Cellshock GMH 8500 2GB-1508MHz 2.74v vldt
Cellshock GMH 8500 2GB-1398MHz 4-4-4-12 2.74v vldt
Cellshock GMH 8500 2GB-973MHz 3-2-2-1 2.74v vldt
Cellshock GMH 8500 2GB-1000MHz 3-4-3-5 3.25v SP1M
Mushkin XP 8500 GMH 2GB-1300MHz 2.45v vldt
OCZ Reaper 1200MHz PSC-1406MHz 2.28v vldt
Dominator 8500 GKX 2GB-840MHz 3-2-2-1 2.5v vldt
Your liquid costs a pretty penny... In Estonia I/we get LN2 ~5-6EEK per liter.(1EUR=15,6EEK)![]()
Favourite game: 3DMark
Work: Muropaketti.com - Finnish hardware site
Views and opinions about IT industry: Twitter: sampsa_kurri
Research says that it's close to zero.(Shops that sell LHe)
But if it's urgently needed, we can always come to Finland, it's not very hard.![]()
I get LN2 ~0,30€/L and it comes from Finland (AGA/Linde Gas).
I once asked and LHe is possible also, but only a proper amount because it's delivered from Finland also. Price around 10-15€/L...
But this is "end-user" price so there has to be some cheaper way for LHe.
Sampsa, who is Your LHe dealer?
Vmods - what can possibly go wrong? ©
Liquid helium comes from AGA. There is also company called Woikoski in here, who have Lhe, but the price is higher.
You are as good as your samples are!
i get ln2 1.5€/L, and for liqudi helium the price is about 20€/L
sorry for my bad english
Gigabyte Battlefield Pi 1M #3
Nice benching session you guys....![]()
Next time please organise it in Greece so to rip off some of the "Mr who's" resaults...![]()
INTEL PWA FOR EVER
Dr. Who my arss...![]()
.........
It's all about trying to get nice deals. I'm switching companies for my LN2 and now I go from ~ 3€ per liter to 0.7€ per liter.
Where courage, motivation and ignorance meet, a persistent idiot awakens.
Thanks George!
You were on my invitation list in the beginning, but then I thought you would not be able to make it. It is a shame.. would have been nice in any way.
Well.. The efficiency is the key here and we have to do our best to compete this guy, who ever he isClockspeeds might got a little boost as well in the near future
![]()
You are as good as your samples are!
Few words about the price of LHe.
It is totally unnecessary to talk about it. Think about it this way; In Finland you will have to pay 158€ / 20L of LN2. That is the list price for consumers like me. Take 40L and you paid over 300€ .. 80L and 600€. In a year you will use definitely more money to liguid nitrogen than to LHe even if you pay one session by yourself.
LHe is the ultimate element in benching. First you bench hundreds of hours on LN2 and when everything is ready, you will try to do your best with the coolest stuff you can get.
I do understand what most of you mean here, but I also see how cheap LN2 is for you. Stop complaining, if you can get LN2 almost for free. Come here and pay my price![]()
Last edited by SF3D; 07-08-2009 at 02:13 AM.
You are as good as your samples are!
Bookmarks