The voltage itself is not too bad, Phenom II's can probably take 1.5v-1.55v safely for 24/7 use. The issue is keeping them cool at that voltage, best below 55c load which is where it seems stability starts to nose-dive for me anyways.
Heat is the killer. I ran my x3 at 1.5 for two months with no issues but I have great load temps. As long as you can keep your temps in check, I wouldn't worry about 1.5v vcore. You might not even that much voltage unless your going for 4+ghz
Phenom II X2 550 BE @ X4 B50 3.4ghz
Cooler Master Hyper 212 Plus - 2 x 120mm Scythe S-Flex F
MSI 790FX-GD70 4GB G.Skill ddr3 1333 Pi series 7-7-7-18 1.6v
WD 250 GB Sata
EVGA 9800GT w/ Accelero S1 Rev. 2 Passive cooler
Corsair TX650w psu
cool, thx for the quick responses guys.
(Gaming)
AMD Phenom X2 550 Black Edition ( 0921 APBW )
Unlocked to X4 Currently Running at 3.7GHz-1.450v prime stable (Blend)
Gigabyte MA790X-UD4P
G.Skill DDR2 PC2 6400 Running at 533MHz
1TB SATA Hard-drive
ATI Radeon X850xl
EMPREX 22' inch LCD Monitor
c_buzz can you please add me to the list? Thanks.
Has anybody figured out how to get core temps on a unlocked 550BE?
i5 750
Intel DP55KG
4GB DDR3 1333
Gigabyte 6950 2GB 880/1375 1536 shaders stock voltage
Corsair HX 650 PSU
Windows 7 64 bit
semi-worked one of the cores is bad and will only clock to 2ghz
0921APBW - cdawall - Asus Crosshair III - BIOS 503 - semisuccess - LINK
http://valid.canardpc.com/show_oc.php?id=593668
![]()
Anyone successfully unlock x2 550BE on a GD70?
I'm using the default cooler too, and the temps hit about 71 like you said. That's the cpu temp and not the core temp, though so I'm guessing the cores are hitting about 63 or so tops (about 8 degree difference when running two cores). AMD lists that the processor can handle up to 70, so hopefully with an aftermarket cooler I'll be able to run this at 4 cores.
Hi
I managed to unlock my 550 with a M4A78-E using bios 1104. In my previous post I wasnt able to do this but its very unstable I get graphical glitches.
I did manage to run prime95 and all cores seem to work ok. Im sure its just a bios update for this motherboard, Im emailing ASUS as we speak to see if they can rectify this problem.
Mind you, Its took 3 emails to ASUS as they dont know how to enable or find the unleash mode!!![]()
C-Buzz.. i think u got my info wrong
It's MSi 790FX-GD70 - 1.4b4 BIOS - Success
Btw.. anyone can recommend a good CPU cooler?
U guys using default coolers or?
Oh ok.. then u can put it as partial success :P
Any way the mobo model is wrong too..
Now gonna source for a good cooler to make it stable.
C-BuZz, plz add me to the list lucky users of 550BE 0922APMW
Check it out: http://www.xtremesystems.org/forums/...4&postcount=98
AMD Athlon II X2 240 | Thermalright Ultima 90 | Biostar TA780G M2+ (AMD 780G & SB700) | Crucial Ballistix Tracer DDR2-1066 2 x 1GB | ...
with CROSSHAIR III 0922 APMW
http://valid.canardpc.com/show_oc.php?id=594029
0921APBW- JPM804 - MA790XT UD4P- F4G - Success
![]()
Is this the latest bios? Did you try with 3/6/2009 and failed to unlock ??
I just found out that a new bios is out 2009-06-17
Last edited by El Greco; 06-28-2009 at 04:29 AM.
"friends don't let friends run RAID-0"
After trying for a couple of times, finally got the extra 2 cores stable. The reason y last time it was so unstable was becoz of the extremely high temps (idling in BIOS was @ 70+C).
A very very big thanks to Jingz83 for loaning me a True 120 and AMD brackets. Now finally got it stable. Now wif slight overclocking. Gonna try higher later....
So far my 1st ever AMD journey is quite successful :P
![]()
Anyone tried this on a Biostar TA790GX XE? That board has me intrigued. SB750 on mATX? (we don't get Jetway and DFi here)
There's a new batch 0922CPMW.. anyone tried this batch?
Bookmarks