Quote Originally Posted by Elusid View Post
I don't have the rig up and running yet. Still need my CPU, RAM and HDDs + all my liquid stuff... It's going to be a few months

EDIT: On a side note... HOLY . So originally I had my rig set up with my GPU2 and SMP clients priority set to low and I went through and re-read the SMP configuration guide and it recommends having it on idle and I thought that makes sense, if the video cards need to use the CPU at all then it would slow them down a bit... so I set it to idle and my video cards went from 1000, and 1250 PPD each to 2060PPD each! My Q6600 dropped down to 2000 from 2600 though but it was showing 1950 last night before I left anyway so I have a feeling that will bump back up but now my total PPD from the rig went from ~4500 to ~6000 =D
Are you running command clients or GUI clients?
I used the GUI clients at first but now I am trying to get the command clients running correctly.
Seems if I push the GPU clocks up even a little bit it starts throwing errors right and left.
Also are you running the Multi-SMP or the single CPU client.
I am so confused.