The E0 Q9550 SLB9V thread (finally!)

[Kai Robinson]

Set the strap to auto, NB voltage to 1.3 (yours is a little on the high side for a P45), GTL's to 0.680 for the CPU AND 0.670 for the MCH, FSB Termination voltage to 1.2, PLL to Auto

Trying to increase the FSB to that level without changing the GTL's is nigh on impossible.

Oh, and leave the SATA Voltage alone...

[LennyRhys]

Set the strap to auto, NB voltage to 1.3 (yours is a little on the high side for a P45), GTL's to 0.680 for the CPU AND 0.670 for the MCH, FSB Termination voltage to 1.2, PLL to Auto

Trying to increase the FSB to that level without changing the GTL's is nigh on impossible.

Oh, and leave the SATA Voltage alone...

Yeah I've been trying different settings from my previous attempts (e.g. NB and VTT are down to 1.2v), and still no luck. I'll give your suggestion a go and get back to you. Thanks.