Gigabyte EX58-UD5/Extreme Discussion Thread

[Sparda]

I built the MultiBoost program into the latest version of RealTemp. Just add this to your RealTemp.INI file to keep your multiplier at its max:

MultiBoost=1

http://www.fileden.com/files/2008/3/...mpBeta_330.zip

It works good for the DFI boards with 12X multi issues.

Thanks for the tips. Will try them.

Updated version:
EasyTune 6 B09.0421.1

Oh..I miss that. Thanks.

Can someone help me on my OC im using bios F7c and i got it up to 3800 i have a C0 920, i would appreciate some help thank you.

ok so LinX gives a windows error in Windows 7 after about 2 runs.

Any suggestions please on what I should try ?

I'm using this same ram on my UD5 and seems to working fine.

So before I go reading all 100+ pages, is there a "sticky" as to how to OC this thing =D, yes I'm another newbie to i7 and x58

Use this thing so people have some idea of your setting and rig.

Advanced CPU Features:
CPU Clock Ratio ................................ [ x]
Intel(R) Turbo Boost Tech ...................... [Enabled]
CPU Cores Enabled .............................. [All]
CPU Multi Threading .............................[Enabled]
CPU Enhanced Halt (C1E) ........................ [DISABLED]
C3/C6/C7 State Support ......................... [DISABLED]
CPU Thermal Monitor ............................ [DISABLED]
CPU EIST Function .............................. [Enabled]
Virtualization Technology ...................... [DISABLED]
Bi-Directional PROCHOT ......................... [DISABLED]

Uncore & QPI Features:
QPI Link Speed .............................. AUTO
Uncore Frequency ............................(  x)
Isonchronous Frequency ......................[Enabled]

Standard Clock Control:
Base Clock (BCLK) Control .......................... [Enabled]
BCLK Frequency (MHz) ................................[   ]
PCI Express Frequency (MHz) ........................ [Auto]
C.I.A.2........................................... .. [Disabled]

Advanced Clock Control:
CPU Clock Drive ..............................[800mV]
PCI Express Clock Drive ................... [900mV]
CPU Clock Skew ............................. [0ps]
IOH Clock Skew ............................. [0ps]

Advanced DRAM Features:
Performance Enhance ...................... [TURBO]
Extreme Memory Profile (X.M.P) ........... [Disabled]
System Memory Multiplier (SPD) ........... [AUTO]
DRAM Timing Selectable (SPD) ............. [QUICK]

Channel A + B + C

Channel A Timing Settings:
##Channel A Standard Timing Control##
CAS Latency Time ......................
tRCD ..................................
tRP ...................................
tRAS ..................................
CR.....................................

Advanced Voltage Control:
CPU
Load Line Calibration ................. [ENABLED]
CPU Vcore ..............................[  ] 
QPI/VTT Voltage 1.150v .................[  ] 
CPU PLL 1.800v .........................[Auto]

MCH/ICH
PCIE 1.500v ...........................AUTO
QPI PLL 1.100v ........................AUTO
IOH Core 1.100v ....................... 1.1v  
ICH I/O 1.500v ........................AUTO
ICH Core 1.1v .........................AUTO

DRAM
DRAM Voltage 1.500v ..............[   ]
DRAM Termination 0.750v.......... [AUTO]
Ch-A Data VRef. 0.750v ...........[AUTO]
Ch-B Data VRef. 0.750v ...........[AUTO]
Ch-C Data VRef. 0.750v ...........[AUTO]
Ch-A Address VRef. 0.750v ........[AUTO]
Ch-B Address VRef. 0.750v ........[AUTO]
Ch-C Address VRef. 0.750v ........[AUTO]