Micron D9 GMH\GKX\JKH etc club

**RPGWiZaRD** · 06-13-2009, 09:18 PM

Nothing exceptional to see here except some rather nice performance efficiency but I like the sticks so much I don't dare to push them yet so here's my 2 plausible 24/7 configs at 2.15v (never tried going lower). I managed to get a short circuit so a fuse in my student appartment went off killing one of my precious CellShock DDR2-1000 4-4-4-12 sticks. I applied for RMA and got a new kit and this new one is at least as good as the old.

DDR2-1000 4-4-4-8 PL7 2.15v 500x8 1:1

DDR2-1200 5-5-4-10 PL8 2.15v 500x8 5:6

Don't seem to have any MemTest screen of DDR2-1200 config saved but I found this of the DDR2-1000 config:

I prefer using the first config. P35 & Micron D9GKX ftw!

**CryptiK** · 06-13-2009, 10:11 PM

Nice setup, the P35's respond well to CAS4. P45 CAS4 performance is barely any better than when using CAS5 at the same frequency. Shame about the power spike that killed your stick, good thing you managed to get an RMA.

Here's my CellShock 8000 C4 sticks.

600 MHz / 5-5-5-15 @ 1.97v / 500% dual HCI Memtest

**raresvintea** · 06-14-2009, 02:08 AM

hello everybody.

i have a pair ok kingston 2x1gb 1150 d9gkx. on my motherboard a dfi p35 t2rl i can't clock them to maximum, i can't reach 1200.....

i want to buy from somebody a motherboard named asus comando

can you say if i will cam overclock my memories on this board... i am desperate!

i

**CryptiK** · 06-14-2009, 02:16 AM

Maybe, it may take some work (and voltage) though, the P965's were not the best ram overclocking boards - mione topped out around 640 MHz with pretty scary vMCH and around 1200 with safe voltages.

You'd be better off going for something like the Gigabyte UD3P or UD3R (they are cheap and clock ram extremely well) or an X48 like the DFI T2RSB Plus or Asus Rampage Formula.

**Shiranui Gen-An** · 06-14-2009, 06:25 AM

Originally Posted by CryptiK

Yeah those PC10000 corsair sticks were regularly hitting 600 - 620 MHz CAS4, but despite that some still couldn't hit 650 - 660 MHz CAS5 bench stable.

Yeah, I pulled mine back out, still can do 600MHz C4 with 2.45V but won't do 650 C5 for anything

**WaterFlex** · 06-17-2009, 12:15 AM

Guys...
He tricked me out of 70 EUROS... CellShock kit I have gotten is dead... f****g *****!

**fatguy1992** · 06-17-2009, 12:39 AM

Dam that really sucks, sorry to hear that

**zsamz_** · 06-17-2009, 12:50 AM

Originally Posted by raresvintea

hello everybody.

i have a pair ok kingston 2x1gb 1150 d9gkx. on my motherboard a dfi p35 t2rl i can't clock them to maximum, i can't reach 1200.....

i want to buy from somebody a motherboard named asus comando

can you say if i will cam overclock my memories on this board... i am desperate!

i

comando will clock the ram past 1200 but will take more voltage on ram and board
get a good p45
or get d9gmh or get low voltage blades
the ut p35 is the best board for core2duo but no good with d9gkx

waterflex i know how you feel man i hate them kind of mofos

**Shiranui Gen-An** · 06-17-2009, 07:03 AM

Originally Posted by WaterFlex

Guys...
He tricked me out of 70 EUROS... CellShock kit I have gotten is dead... f****g *****!

I took a chance on some CellShock 1150s off eBay, we'll see how they are when they get here. Seller has great feedback score so I'm not too worried.

**WaterFlex** · 06-17-2009, 07:28 AM

Shiranui Gen-An
Pay attention: the best kits of "Red Devil" are those which manufactured by 25 week of 2007. All others are not too good. I had kits manufactured at 36 and 44 weeks. They are not so good as mine kit.

**Ket** · 06-17-2009, 07:37 AM

70 pages.. I guess this means GKX modules are still loved?

**WaterFlex** · 06-17-2009, 07:43 AM

Sure they are

But I am awfully dissapointed CellShock doesn`t produce RAM anymore...

**Ket** · 06-17-2009, 07:50 AM

I'm pretty sure they went out of business

If anyone is interested I have a kit of Cellshocks (D9GKX) that need a good home. They just been sitting in their box since I upgraded to 4GB aXeRAM.

**WaterFlex** · 06-17-2009, 07:51 AM

Ok guys. That`s impossible to find another kit of my RAM...
Can you call this RAM the best DDR2 in the world?
Or this ram is enough?

**Ket** · 06-17-2009, 07:55 AM

IMO, I would get this PC9200 kit and save a truckload of change.

**WaterFlex** · 06-17-2009, 08:14 AM

This kit is better and I have it for sale in Moscow, Russia

**raresvintea** · 06-17-2009, 11:28 AM

hello
i borrow from a friend of mine a pair of mushkin xp2-8500 5-5-4-12 with d9gmh! on my motherboard dfi p35t2rl i can't pass over 1110mhz. it's imposible.
but with a pair of team xtrem i can reach 1200, but they are not mine.... i have made a only a test....

have you any other sugetions? what to set, how to... i don't know..... i want to reach 1200 but i can't. motherboard boot and remains at dfi screen.... can you give me sugestions... pls

sorry for my english

**zsamz_** · 06-17-2009, 04:15 PM

Originally Posted by raresvintea

hello
i borrow from a friend of mine a pair of mushkin xp2-8500 5-5-4-12 with d9gmh! on my motherboard dfi p35t2rl i can't pass over 1110mhz. it's imposible.
but with a pair of team xtrem i can reach 1200, but they are not mine.... i have made a only a test....

have you any other sugetions? what to set, how to... i don't know..... i want to reach 1200 but i can't. motherboard boot and remains at dfi screen.... can you give me sugestions... pls

sorry for my english

some of those mushkin are d9gkx lol
if they are d9gmh they are degraded

and best to use 333 divider

waterflex: you shoulda got the lv blades instead of tryin to get them red cellshock

**Ket** · 06-18-2009, 04:02 AM

Originally Posted by WaterFlex

This kit is better and I have it for sale in Moscow, Russia

From what I could find out, their both the same just badged differently

Although that doesn't excuse the fact I was too lazy to see if memoryc had the 9600 kit

in which case for the very small price difference, I would get the PC9600 kit and be happy

**WaterFlex** · 06-18-2009, 04:19 AM

Originally Posted by Ket

From what I could find out, their both the same just badged differently

Although that doesn't excuse the fact I was too lazy to see if memoryc had the 9600 kit

in which case for the very small price difference, I would get the PC9600 kit and be happy

Will be in my hands in 4 hours

I am selling my CellShock, guys...my lovely, good and brave red sticks... after making sure my new OCZ RAM will be fine.

**Ket** · 06-18-2009, 04:36 AM

Lucky git

I also have my Cellshocks up for sale, just don't need them so they may as well go to a good home.

**CryptiK** · 06-18-2009, 04:46 AM

Waterflex, Did you test both sticks and both are dead? Why dont you try and freeze your non functional cellshocks and see if this revives them?

Also I wouldnt sell your functional ones, have some fun with them and keep them for backup ram. They are too rare to sell off IMO, and I have yet to see you run some SPI32M etc at high clocks. I want to see what they can do

**Shiranui Gen-An** · 06-18-2009, 07:12 AM

Originally Posted by Ket

70 pages.. I guess this means GKX modules are still loved?

Of course! Micron RevD chips still the only ones to my knowledge that can clock up over 700MHz.

**LennyRhys** · 06-18-2009, 09:20 AM

Originally Posted by Ket

70 pages.. I guess this means GKX modules are still loved?

I dunno - they seem popular here but I tried selling a Cell Shock D9GKX kit on ebay and it didn't sell

I'd have given a limb for D9GKX, but I suppose now it's rare because it's slowly becoming obsolete, not because it's in high demand.

**zsamz_** · 06-18-2009, 10:14 AM

elpida rev

is where it at now lol if they are reliable

Thread: Micron D9 GMH\GKX\JKH etc club

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions