MMM
Results 1 to 25 of 4486

Thread: Real Temp - New temp program for Intel Core processors

Hybrid View

  1. #1
    Xtreme Member
    Join Date
    Dec 2005
    Location
    -X-
    Posts
    165
    I´m rebuilding my computer, see sig, had my motherboard in for RMA but they
    didn´t find anything but my SATA RAID 5 is still gone, for now I got a
    SATA 1TB harddrive in IDE-mode and testing everything, don't even got any
    nvidia forceware drivers installed running on an old 14" monitor @ 800x600
    resolution (colors look ok) but seriously thinking of digging up the
    old 21" Sony (colors is very grayish)



    Did this test before I underclocked it as unclewebb described in post #3509
    and Speedstep C1E idle @ 1.600 GHz and load @ 2.400Ghz,
    test calibrated 0.0 0.0 4.5 2.5 (just some numbers dialed in)

    idle @ 1.600 GHz and load @ 2.400Ghz, test calibrated 0.0 0.0 4.5 2.5
    1b
    1b-00-idle-C1E-2400-9x266-1V27-1x(000)-P95-MEM800-tcal





    I underclocked it as unclewebb described in post #3509 and Speedstep C1E
    Prime95 with 25% load on 1 core @ 1.600Ghz, test calibrated 0.0 0.0 4.5 2.5
    2a
    2a-25-load-C1E-1600-6x266-1V10-1x(025)-P95-MEM800-tcal


    2b
    2b-00-idle-C1E-1600-6x266-1V10-1x(000)-P95-MEM800-tcal





    test calibrated 0.0 0.0 4.5 2.5 (just some numbers dialed in)
    2c
    2c-00-idle-C1E-1600-6x266-1V10-1x(000)-P95-MEM800-tcal-sett







    1 x Prime95 with 25% load on core 0 @ 1.600Ghz
    3 x Prime 2004 75% load on core 1, 2, 3 @ 1.600Ghz
    PrintScreen at 99% "heatup load" as close as possible to 100%
    Maximum cooling 5 fans at 100% and, topfan 50%
    in: 2x120mm, door:80mm on gpu
    cpu:120mm on TRUE, out:120mm, twin 2x80mm)
    calibrated 0.0 0.0 0.0 0.0 (see 2c)

    3a
    3a-99-load-C1E-1600-6x266-1V10-4x(099)-P95-MEM800-0cal






    0 x Prime95 with idle on core 0 @ 1.600Ghz
    3 x Prime 2004 75% load on core 1, 2, 3 @ 1.600Ghz
    PrintScreen at 31.4% "CPU load" and "test #9"
    calibrated 0.0 0.0 0.0 0.0 (see 2c)
    3b
    3b-75-load-C1E-1600-6x266-1V10-3x(075)-P95-MEM800-0cal


    3c
    3c-00-idle-C1E-1600-6x266-1V10-0x(000)-P95-MEM800-0cal


    (btw 1V10 is 1.10V, 3x(075) is 75% x P95 is Prime95, MEM800 is memory @ 800 Mhz, 0cal is not calibrated at 0.0 0.0 0.0 0.0 etc )


    What are good values for the calibration (see 2c) ?
    Last edited by -X-hellfire; 06-13-2009 at 11:19 PM.
    Gigabyte P35-DQ6 - rev 1.0, F7 bios | Kentsfield Q6600 G0 - 2.4 @ 3.200 Ghz, 400x8, Vcore 1.300V | Corsair HX-620W PSU | Realtek HD audio 7.1 mb | SATA: 0-3:4x1TB Samsung Spinpoint F3 in RAID 10, 64k stripe on Intel Matrix Storage Manager with volume c:128GB, d:1.7TB, 4:250 GB Samsung SSD 840 EVO, nonraid: SATA: 5:1TB Samsung Spinpoint F3, 1TB Samsung Spinpoint F1 on Gigabyte SATA2/Jmicron | usb3:Silverstone EC04P- (1x-pcie) | SATA:Rocket 620 (4x-pcie) | XFX 8800GTS FATAL1TY 320MB RAM | Corsair XMS DDR2 PC6400 5-5-5-18 2 x 2x2048 8GB kit @ 800MHz +( default )V in bios | ThermalRight Ultra EXTREME 120 + Noctua NF-P12 120mm fan | 27" QNIX 2710LED, IBM P97 19" gone bad | Samsung SH-203N DVD; firmware SB01 | Logitech MX1000 + MX600 Laser Mouse, Comfort Cordless Keyboard | Dlink DIR-855 Firewall wireless 100/10, DWA-556 (300N) | 2 x T-Balancer XL fancontroller with 8 fans on Attenuators| 3 x Noctua NF-P12 120mm, NF-R8 80mm, CT80 80mm, 2xPanaflo 80mm | case1: CM Stacker T01 | OS: 1:Windows XP Pro, 2:64-bit 3:Win 8.1 64-bit 4:Win 7 64-bit | case2: CM HAF 932 | Corsair HX-520W PSU

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •