Quote Originally Posted by Don_Dan View Post
Hey radaja, could you please post some settings, I'm mostly interested in CPU and MCH voltages ( ref, vtt... )

Would be very much appreciated!



Congrats! You have been looking for that kit as hard as me searching Crucial anniversary kits... maybe even harder.
sure.here you go.i had a hard time going above 540fsb then i changed my mch ref from 0.750v w/vtt of 1.28 to 0.770v w/vtt 1.28 shows in ET6 as 0.720v.
Code:
Load-Line Calibration [Enabled] 
CPU Vcore         [ 1.25000 ]...................1.368
CPU Termination   [ 1.20    ]...................1.28
CPU PLL           [ 1.50    ]..................... 1.57
CPU Reference     [ 0.760  ]...................normal

MCH Core          [1.100    ].....................1.40
MCH Reference     [0.760    ]...................0.770 
MCH/DRAM Refernce [0.900 ].................normal
ICH I/O           [1.500    ].......................normal 
ICH Core          [1.100    ]..................... normal
.
DRAM Voltage      [1.800    ]...................2.34
DRAM Termination  [0.900  ]...................normal
Channel A Ref     [0.900    ]...................normal 
Channel B Ref     [0.900    ]...................normal