UnOfficial EVGA X58 Classified Owners Thread

[Viss]

PCI-E 104 is max you used? If so try a bit more.

[raptor1]

Major Update To The First Page

Let Me Know What Ye Think and If There Is Anything Else That Ye Want Added Let Me Know By PM

Thanks
Raptor1

[MiKA7]

Major Update To The First Page

Let Me Know What Ye Think and If There Is Anything Else That Ye Want Added Let Me Know By PM

Thanks
Raptor1

Nice work done on the frontpage Raptor1!


those of you that have the 759 how high are your nb temps, and what is recommended??

[OBR]

has someone tested a Xtreme Cooling setting in BIOS and by jumper? Is this the same? I am ready for LN2 session, but i dont know what is better ...

PS. CSC Strap jumper is not working NOW, it is feature for future CPUs ...

[road-runner]

I love this board and cpu, W3520/760/Corsair GT cas 8 6Gb, and 2-Sapphire 4870x2 with Swiftech Caldera water blocks with modded bios no volt mods. Most of these where done on the OCZ Cyro Z but I did try the F1 Kingpin pot once I seem to have a coldbug around -68c so not much better scores or clocks than the SS. This is Windows 7 64 bit RC1 no tweaks...

cpuz



superpi1m



superpi32m on water cooling



wprime32m



wprime1024m



pifast



AM3



3DM01



3DM03



3DM05



3DM06



With water cooling, I have a couple SSDs coming to try to improve PCMark

[Splave]

PCI-E 104 is max you used? If so try a bit more.

Tryed up to 112 but no dice, on SS right now. Will see if its still happening at -50c

[Splave]

What a difference cold makes

[bluehaze]

What a difference cold makes

Try Channel interleave 2 way, Rank interleave 1 way, probably break 5ghz

[Splave]

ill give her a shot, what exactly do they do?

EDIT

Whatever it does it 5.11

http://valid.canardpc.com/show_oc.php?id=577360

lol

[Expat GriZ]

@ raptor1 Well done on the changes to the first post!!

@ Bobbylite Very nice!! Can't wait to get home and throw mine under the SS.

[BustaH]

Try Channel interleave 2 way, Rank interleave 1 way, probably break 5ghz

nice clocks on the d0 Bobbylite...and great tip!

[cstkl1]

so has anybody done 2100 4.4ghz stable with prime95 say 8 hours or so??

still havent seen anything spectacular on this mobo for high stable clocks with high dram speed..

[Ace-a-Rue]

i did 2 hours..my post is back a few pages..i am not a supporter of 8 hours...to many variables can upset the apple cart even with 8 hours under your belt...i say just do the minimum that you would be using the machine for video games or whatever..if you are talking about folding, you would be crazy to do that at 4.4 ghz...if it was me, it would be a very mild overclock to do folding.

[cstkl1]

i did 2 hours..my post is back a few pages..i am not a supporter of 8 hours...to many variables can upset the apple cart even with 8 hours under your belt...i say just do the minimum that you would be using the machine for video games or whatever..if you are talking about folding, you would be crazy to do that at 4.4 ghz...if it was me, it would be a very mild overclock to do folding.

think u missed out the part of dram being 2100mhz.

[tekjunkie]

so has anybody done 2100 4.4ghz stable with prime95 say 8 hours or so??

still havent seen anything spectacular on this mobo for high stable clocks with high dram speed..

I am tempted to give it a shot with my W3540 after I get my RMAed dom GTs back . The thing is though I am on air, so I am a bit hesitant to run 8 hours prime with that kind of heat it would be generating.

I think that it could be done only with higher binned Elipdas as they seem to require lesser drive strength and most probably only with Xeons as they seem to have better IMCs than the 920 D0s.Just my

EDIT: Did you try loosening tRFC?

[cstkl1]

I am tempted to give it a shot with my W3540 after I get my RMAed dom GTs back . The thing is though I am on air, so I am a bit hesitant to run 8 hours prime with that kind of heat it would be generating.

I think that it could be done only with higher binned Elipdas as they seem to require lesser drive strength and most probably only with Xeons as they seem to have better IMCs than the 920 D0s.Just my

EDIT: Did you try loosening tRFC?

an hour of prime95 large fft custom 5.4gb would do as just want to show dram stability with the qpi..

still undecided to take the plunge as the dfi is still impressive

[dejanh]

an hour of prime95 large fft custom 5.4gb would do as just want to show dram stability with the qpi..

still undecided to take the plunge as the dfi is still impressive

If you send me a set of 2K CL7 GTs I'd gladly do the test for you

[Ace-a-Rue]

think u missed out the part of dram being 2100mhz.

i see what you are talking about...but why come in here to ask other than to say, "look at me, i got the better board;" which i do not think is the case.

[NaeKuh]

Setup:


24/7 settings..


heh i dont break 70's on linX and this is with 22-24C ambient.

[ACE76]

I was about to buy the Classified board today and then saw this in stock and now can't decide!:

http://www.newegg.com/Product/Produc...82E16813131390

[jcniest5]

I was about to buy the Classified board today and then saw this in stock and now can't decide!:

http://www.newegg.com/Product/Produc...82E16813131390

Why do you need that board?

[Helfarch]

I was about to buy the Classified board today and then saw this in stock and now can't decide!:

http://www.newegg.com/Product/Produc...82E16813131390

2 x the NF200
2 x the fail

[ACE76]

I had no problems overclocking on the P6T6 and was able to get my C0 920 to 4.4ghz without too much trouble...I will probably still get the Classified just for high BCLK.

[Vega]

This is maybe a stupid quest but I ask any way!
It does not effect the performance if i put my single GTX295 card to PCIex 2 or 3 instead of PCIex1, Right?
I need that space to cool my chipset on air.

[Splave]

pretty sure you have to use the top slot if you only use one card, atleast thats what I was told by evga when I was having issues with my pci-e slots.

"Did you make sure the card is in the top PCI-E slot because it needs to be"