Core i7 920 rev D0 stepping 5 :)

[roller11]

Still moving on up slowly, the batch number is a 3848A352 from NewEgg...

WOW! Fabulous job, RR!!

[road-runner]

WOW! Fabulous job, RR!!

Thanks I have some good cas7 DDR3-2000 on the way so maybe I can get a little better scores...

[roller11]

Thanks I have some good cas7 DDR3-2000 on the way so maybe I can get a little better scores...

The fact that you can do a prime run at 235.5x21 tells me you have a lot of headroom, especially with better RAM. As I recall, you have a 3845B027, right? Do you find it's vcore setting tops out relatively low? Also, is your val screen with DICE, water, something else?

[road-runner]

The fact that you can do a prime run at 235.5x21 tells me you have a lot of headroom, especially with better RAM. As I recall, you have a 3845B027, right? Do you find it's vcore setting tops out relatively low? Also, is your val screen with DICE, water, something else?

No its the 3848A352, I started out on water to get used to the motherboard and all and see how far I could push it, then I put it on the OCZ Cryo Z single stage. Next will be LN2 or DICE, I am having to give it 1.425 volts to make it through the cpu test in 06 @ 4.9Ghz.

The phase change only holds it at about -2 - -0c under load. I am having trouble getting 237, I can get 236 but not 237. I am going to have to tweak on it a little more and see if I can get passed 236.

I did manage 33183 in 06 and 42841 in 05 today, I cant figure out how to upload the saved results but I do have a SS. I need to get my water cooling back on the 4870x2s...