Core i7 920 rev D0 stepping 5 :)

[Renegade5399]

Very nice. Are we talking Elpida Hyper memory?

I can't wait to test mine. Some other guys at hw.no got the same batch and they're all looking very good. Glad I went for an Xeon over the 920 D0.

My Xeon W3520 is the Batch # 3848A352. I run 50nm Elpida Hypers. I am having excellent luck with it. Seems the Uncore is stable up to about 4200MHz or so as well. Very good batch IMO.

You can see my results here!

[road-runner]

I tried the DDR3 2000 its crucial and takes 2v is what it says on it, I have not had any luck with it. I put the DDR-1600 Corsair Dominator back in it and hooked the OCZ Cryo Z to it running it on 2:6 divider. I have only had it going a few minutes but having trouble getting to 230, I guess I need to tweak on it a little more or this may be all she has captain...

[jpm804]

I tried the DDR3 2000 its crucial and takes 2v is what it says on it, I have not had any luck with it. I put the DDR-1600 Corsair Dominator back in it and hooked the OCZ Cryo Z to it running it on 2:6 divider. I have only had it going a few minutes but having trouble getting to 230, I guess I need to tweak on it a little more or this may be all she has captain...

Nice clocks on that W3520 ... 4.8 at 1.28 Vcore

[chance]

I tried the DDR3 2000 its crucial and takes 2v is what it says on it, I have not had any luck with it. I put the DDR-1600 Corsair Dominator back in it and hooked the OCZ Cryo Z to it running it on 2:6 divider. I have only had it going a few minutes but having trouble getting to 230, I guess I need to tweak on it a little more or this may be all she has captain...

Congratulations, very nice CPU Batch?

[jagt]

My Xeon W3520 is the Batch # 3848A352. I run 50nm Elpida Hypers. I am having excellent luck with it. Seems the Uncore is stable up to about 4200MHz or so as well. Very good batch IMO.

You can see my results here!

Thanks! I'll be running the same batch, the same motherboard and very similar memory (Corsair Dominator GT) with some pretty high-end watercooling... So hopefully I can expect similar results. Monday can't come quickly enough!

[road-runner]

Still moving on up slowly, the batch number is a 3848A352 from NewEgg...

[roller11]

Still moving on up slowly, the batch number is a 3848A352 from NewEgg...

WOW! Fabulous job, RR!!

[road-runner]

WOW! Fabulous job, RR!!

Thanks I have some good cas7 DDR3-2000 on the way so maybe I can get a little better scores...

[roller11]

Thanks I have some good cas7 DDR3-2000 on the way so maybe I can get a little better scores...

The fact that you can do a prime run at 235.5x21 tells me you have a lot of headroom, especially with better RAM. As I recall, you have a 3845B027, right? Do you find it's vcore setting tops out relatively low? Also, is your val screen with DICE, water, something else?

[road-runner]

The fact that you can do a prime run at 235.5x21 tells me you have a lot of headroom, especially with better RAM. As I recall, you have a 3845B027, right? Do you find it's vcore setting tops out relatively low? Also, is your val screen with DICE, water, something else?

No its the 3848A352, I started out on water to get used to the motherboard and all and see how far I could push it, then I put it on the OCZ Cryo Z single stage. Next will be LN2 or DICE, I am having to give it 1.425 volts to make it through the cpu test in 06 @ 4.9Ghz.

The phase change only holds it at about -2 - -0c under load. I am having trouble getting 237, I can get 236 but not 237. I am going to have to tweak on it a little more and see if I can get passed 236.

I did manage 33183 in 06 and 42841 in 05 today, I cant figure out how to upload the saved results but I do have a SS. I need to get my water cooling back on the 4870x2s...