New AQYHA 0402 bartons..

[Swindler]

My friends got AXDA2500DKV4D AQYHA 0402SPMW bartons.
Image
And do 220x11 without uping voltage (1,65v)

and with Aero 7+


have somebody experience..
Maybe buy this cpu because mobile not shells in my country..

Sorry for my terrible english..

[Dominos]

well i think that PR calc is abit wrong. 3200+=11x200 and 3000+=10.5x200 so then 12x200=3600+ and 13x200=4000+
uAMD tool says it's a 4200+ @ 11x235 so...

But it's a really nice OC and 2.4 without increaseing the vcore!!! Thats great! Good luck with that toy, its probadly only the motherboard that can stop it, good job

[celemine1Gig]

Yeah, these new AQYAH CPUs really seem to be the best as for now.
In the german hardwareluxx.de forums, one guy bought a few of these chips (I think about 4 or 5) and they all did 2,5Ghz at least! So really nice chips.

I'd like to have one myself, as the two 2400+ mobile bartons, that I just received, are clocking like crap. OK, not really like crap, but 1.8V and more for 2400 MHz is not that good these days. My old bartons do as well as these, or even better.

[Death ++]

looks like cpu-z is reporting 1.888v as the vcore. not exactly stock voltage

[TKD]

Which one is shown in the picture? I hope its the AXDA2500DKV4D 'cos i'll buy one if it is

[Jeff]

I swore I wouldn't go back to 32-bit but these are just too tempting. I just ordered a mobile 2500 off NewEgg.com. I know it probably won't be this stepping but I have my fingers crossed. I'm also going to be buying a XP/MP/Barton nVentiv mounting kit so hopefully I get some good numbers out of her.

[Swindler]

Originally posted by Death ++
looks like cpu-z is reporting 1.888v as the vcore. not exactly stock voltage

with stock "only" 220x11.

[shrae]

Originally posted by Swindler
[B]My friends got AXDA2500DKV4D AQYHA 0402SPMW bartons.

And do 220x11 without uping voltage (1,65v)

That's INSANE. I haven't seen anyone report a mobile XP being able to do 2.4Ghz on 1.65v. I wonder how much consistency we'll get with these.

Now I don't know what to get again....

[Swindler]

.....now cheking on 225x11 1,65v , still working

My new toy Antec TC 550W PSU maybe go higher with him

[shrae]

OK, so I lied. Guy at overclockers said he got a mobile 2600+ to 218x11 @ 1.625v.

Also, another user got a SPMW 0348 on a mobile 2600+. 2730 prime stable at 2v under an RBX block. Looks like SPMW stepping from around the new year could be a real winner.

[Swindler]

[QUOTE]Originally posted by Swindler
[B].....now cheking on 225x11 1,65v , still working

225x11 prime not passed..

220x11 Rock

[Breathless]

Keep us informed as to how far you get

[Cucumber]

Id like to see some screenies of that

[Swindler]

Chip is not my
Friend not will go higher or try on my water system
I can`t find another chip with this steping because all new chip (from all wholesalerers) got nes stepings and oc very bad..
i think with this steping in my country is ~100 chips and <10 people know what they get

Sorry for my terrible english..

[FlyingHamster]

wow holy crap Death ++, wut kinda cooling are u using on that 2600-m to get 2.8ghz?

[Perc]

i got a 2500 barton that runs 2400mhz 1.65v AXDA2500KV4D F3716682500001 AQXDA 0314WPCW this was my very first barton and the damm thing would max out at 2600mhz 1.9v on air. this is the chip i was able to run 246fsb in my nf7 where as my new molbile 260 would only do 220 fsb (L12 mod needed big time!)... i still cant decide wich one i like beter? they both run prime stable at 2600mhz just that one will do 2700mhz and possibly more with better cooling?

peace perc,