Is it good for bough M4A79T Deluxe Rev1.01G and Rev1.02G
I have the Rev. 1,02G and bios start shows 4 cores, but everything in windows shows only 3 cores.
OCTeamDenmark.Com
I presume you used /f to force it, correct?
http://www.biosflash.com/e/bios-update-howto.htm
http://www.xbitlabs.com/articles/mai...os-update.html
hi, i'm wondering if Asus M4A78-EM can unlock 4th core?
wtf? the bios for these boards is AMI, not Award
also, the AMI flash utility supplied on the asus website doesn't seem to support forced flashing. The generic one you can get off AMI's website does have more options you can use, but I don't think there's a parameter "/F" at all.
E: the generic afudos.exe gives the error message "BIOS does not support AFU". Guessing the flasher doesn't support this type of ROM for some reason
E2: actually, it's not surprising that the AFUDOS found on AMI's website doesn't work: it's way too new. Going to try an older version
So. Who has a working flasher?
E3: Success! AFUDOS 2.19 flashes it to the older version without any problems. Found here: http://dlsvr01.asus.com/pub/ASUS/mb/flash/AFUDOS219.zip
E4: Seems to be working. So far the only complaint is that it takes incredibly long to POST because it can't load "Express Gate" for some reason. Fixed by disabling Express Gate. What the hell is Express Gate, anyway?
E5: 4th core is stable. I'm now the proud owner of "AMD Phenom(tm) II X4 20"
Last edited by iddqd; 06-10-2009 at 04:20 AM.
Sigs are obnoxious.
Last edited by gOtVoltage; 06-10-2009 at 07:30 AM.
ok now that I got it working, what do you guys use to measure CPU temps? I've tried CoreTemp and RealTemp so far, and neither of those even support PIIs. AMD Overdrive just shows -256C for all temps.
thanks!
VVVV
Last edited by iddqd; 06-14-2009 at 06:26 AM.
Sigs are obnoxious.
HWmonitor............Read TMPIN0 for Mobo temps.
..........................Read TMPIN1 for overall core temp(CPU).
..........................Read TMPIN2 ? not shure but may be secondary reading for CPU.
The new Everest ,,
This will show you CPU Temp under Overclcoking(SENSOR).
The cores will read Zero , but toward the Top youll see (CPU)..that reads correct.
Voltages are correct for me in both while locked or Unlocked.
![]()
Last edited by gOtVoltage; 06-13-2009 at 11:27 AM.
Any new bios coming out soon? lol,,,,for M4A79
i7 860 Batch # L933B378
ASUS Maximus III Formula
Koolance CPU-360
G.Skill 1600 7-7-7-24
Sapphire 5770
i7 860 @ 4.213 http://valid.canardpc.com/show_oc.php?id=986383
Phenom II 550 X4 @4.160(MA790X-UD4P) http://valid.canardpc.com/show_oc.php?id=652117
Phenom II 550 X2 @ 4.1(MA790X-UD4P) http://valid.canardpc.com/show_oc.php?id=638438
Kuma 7750 @ 3.5....http://valid.canardpc.com/show_oc.php?id=560031
Phenom II 940 @4.1<------ http://valid.canardpc.com/show_oc.php?id=501007
9850BE@3.6------- http://valid.x86-secret.com/show_oc.php?id=447465
M3A76-CM anyone?
ASUS M4N78. Does someone have a beta bios or a link where can I find it to unlock my x3 720. TY
Bios for M4A78-VM would be more than great.
Anyone alive on this thread? Are there any tutorials how to mod bios for this case?
having strange issues with this setup
M4A78T-E (with mod bios)
PII X3 720 BE
this RAM
it seems to be getting less and less stable over time.
I was running it at at 2.8 ghz @ stock voltage for a couple weeks, with ram set to the 1600 mhz divider (@ 8-8-8-24, 2.0Vdimm). Notice how this ram is rated at DDR1800 9-9-9-24, 1.9Vdimm. In the beginning, it was memtest86+ and prime stable. A couple weeks later, it corrupted the hard drive. And fails to POST.
Turns out that one of the memory sticks is defective (errors in memtest86+ now at pretty much any frequency). Strange.. Anyway, Now with only 3 sticks it has cold booting issues. If it does actually POST, it's pretty stable. Although there's no way I can get it to POST with the 1600mhz divider now. It sort of works with the 1333mhz divider. Now, I need to up the voltage on the CPU to 1.375 (from 1.325) to even get it to POST 1/2 the time. Should I RMA the board? Is there another AM3 DDR3 board I should try? It's still failing to POST half the time. If this goes on, it will eventually not POST at all.
E: also, using the 1600mhz divider results in a cryptic DQS error. Anyone else getting this?
Last edited by iddqd; 07-04-2009 at 01:33 PM.
Sigs are obnoxious.
What with it being summer and all... have your ambient temps increased by any chance?
PhenomX4 9850@3.4Ghz / Asus M3N-HT DLX/HDMI / Gainward GTX 285 / 2x2GB G.Skill DDR2-800 CAS4 / Win7 x64 RC / Water Cooling
Hello, first sorry because my bad English :-(
I need big help; wich is mod BIOS for ASUS M3N72-D motherboard.
The last BIOS is "M3N72-D BIOS 1301". This MoBo don't support NVCC option in BIOS for unlocking CPUs.
I have X4 620 (CACYC AC 0931EPMW) wich is "unlockable"(L3).
Other MoBos with nVidia 750a SLI chipset support NVCC (OK, not all MoBos, but a few).
Thanks
what about crosshair III?
IQ_NOT_LESS_OR_EQUAL
outdated hardware
Bookmarks