Good lap job! Too bad we have to this after paying $$
What I did when I was using the HR-03 is cut off the the bits that hold the 92mm fan in place. If you make the top of the fins flat the 120mm fits much better.
Good lap job! Too bad we have to this after paying $$
What I did when I was using the HR-03 is cut off the the bits that hold the 92mm fan in place. If you make the top of the fins flat the 120mm fits much better.
Last edited by annihilus; 05-01-2009 at 08:14 PM.
Glad you managed to get the cooler today! I figured there was no hope after 6:30PM on a Friday.
Not only that, but you already have it lapped! Excellent job and photos.
Looking at your "razor test", I can see where lapping it was a good idea. That's what got me started on doing this to almost every cooler I meet.
Glad the paper helped.
I wanted to mention before you install the HR-03GTX, that I wish I had taken more tests with the stock cooler still on the card for comparisons. Maybe you already have enough data for that though.
Well, you have now started a brand new HR-03GTX Review, with photos!
Looking forward to reading more of this one
That's a cool idea, never thought of that. I don't know if it would help my dual-fan setup, but I can see where it would be beneficial for fitting one 120mm fan. Too bad Thermalright couldn't have done that for us too.
Edit:
BababooeyHTJ: Good plan cutting off the 92mm fins, I think annihilus has a good idea there.
Last edited by Retro; 05-01-2009 at 08:52 PM.
i5 750@3800
Noctua NH-U12P/120x38mm Panaflow M1
GSkill 4G DDR3-2000 Ripjaws
EVGA P55 FTW 200
EVGA GTX 480/Zalman VF3000F &
Zotac GTX 480 AMP Edition/Zalman OEM VF3000F SLI@800/2000
Seasonic M12D 750
WD Caviar 500
Coolermaster HAF 932 Black Edition
W7 64 Pro
I ended up picking it up at the hub, I thought that there was no hope as well. I wanted to wait on the comparisons with the stock cooler untill just before I install the HR-03. The weather has been all over the place here in CT so it will really effect my temps. What type of comparisons did you have in mind?
I just got it installed. The fan clips were useless, I had to use zip ties and I put a strip of foam inbetween the fan and the heatsink. Other than that I'm impressed. My temps are better than I thought that they would be. My sde fan is almost touching the HR-03, I got luckey there.
I'll upload some SS that I took during Ati Tool and Furmark with bouth the HR-03 and the stock cooler. My ambients were roughly the same during all the tests. The thermostat in the room read 67F and my HDD temp was 16c. This is all on a fresh install (I had some fun getting my memory stable) on 181.22 with no tweeks to the control panel. My clocks were set to 700/1512/1242, I can do more but I need to do some testing and I've been procrastonating. My stock cooler had the fan speed set to 100%.
First is a 5 minute run of Ati Tool scaning for artifacts on the stock cooler. Second is a Furmark run at 1680x1050 with 16xaa windowed.
Next is a Furmark run on the stock cooler.
This is with the HR-03 GTX
Last edited by BababooeyHTJ; 05-02-2009 at 07:24 AM.
Nice Job...!
Core 2 Quad Q9650 @ 4.00Ghz 1.3375(v) F9 BIOS
2 X 2 GB DDR2 1100 @ 1000 G.Skill PC2-8800
2 X 500gb GB SATA 2 HD RAID 0
Gigabyte GA-EP45-UD3P
EVGA GTX285 SSC
EVGA 8800GTS G92 PhysX
My 3DMark Vantage Score 16,444
Pics of my computer
That was fast! You got that cooler lapped and installed in record time.
I'm happy with the tests you have done, I just meant regarding my own tests, I would have liked to have done a few more comparisons with my card's stock cooler. I'm not going to re-install the stock cooler though
Just wanted to mention the side door fan issue. That's good that you were able to use it. I had to use the window from my old 900 on my 902 for clearance to get the fan in. The 1200 is better for space, and because I have two fans I think that's what causes the clearance issue with mine.
Thermalright's clips could be better for sure. At least zips do the job, regardless of looks.
Great test results
Isn't it amazing how much the gpu temp. drops.
I think your vrm temps are excellent, and that's even when running the evil Furmark
Just think how cool everything is going to run when you are doing regular gaming, that's the beauty of these aftermarket coolers.
And the 120mm fan on your card now should be quieter than the stock cooler running at 100% was.
Excellent job, have fun
i5 750@3800
Noctua NH-U12P/120x38mm Panaflow M1
GSkill 4G DDR3-2000 Ripjaws
EVGA P55 FTW 200
EVGA GTX 480/Zalman VF3000F &
Zotac GTX 480 AMP Edition/Zalman OEM VF3000F SLI@800/2000
Seasonic M12D 750
WD Caviar 500
Coolermaster HAF 932 Black Edition
W7 64 Pro
Well,
I couldn't wait and I have been saving for a little while so I took the plunge.
I purchased the Artic Cooling Accelero GTX280 from Quietpc.com .
I couldn't wait anymore....! aaahhhhhhhhh!Code:ORDER CONFIRMATION ============================ Quietpc.com, Brawby Grange, Brawby, Malton, YO17 6PZ, UK Tel: +44 (0)870 321 4620 Fax: +44 (0)870 321 4621 VAT number: GB 742616634 Email: sales@quietpc.com BILLING ADDRESS DELIVERY ADDRESS Jason Romero Jason Romero Qty Description Price Total ========================================================================== 1 Arctic Cooling Accelero Xtreme GTX280 fo 64.32 USD 64.32 USD ========================================================================== Sub-total 64.32 USD Delivery by UPS Express 54.59 USD VAT at 0% 0.00 USD ============= Total 118.91 USD ============= All products are in stock and your order has been cleared for dispatch. We hope you enjoy your purchase and thank you for shopping at Quiet PC! For terms and conditions, please see: http://www.quietpc.com/us-en-usd/terms
-Jason
Last edited by Jsunn; 05-02-2009 at 07:09 PM.
Core 2 Quad Q9650 @ 4.00Ghz 1.3375(v) F9 BIOS
2 X 2 GB DDR2 1100 @ 1000 G.Skill PC2-8800
2 X 500gb GB SATA 2 HD RAID 0
Gigabyte GA-EP45-UD3P
EVGA GTX285 SSC
EVGA 8800GTS G92 PhysX
My 3DMark Vantage Score 16,444
Pics of my computer
You should have went water with that kind of money.
For my part I know nothing with any certainty, but the sight of the stars makes me dream.
..
i5 750@3800
Noctua NH-U12P/120x38mm Panaflow M1
GSkill 4G DDR3-2000 Ripjaws
EVGA P55 FTW 200
EVGA GTX 480/Zalman VF3000F &
Zotac GTX 480 AMP Edition/Zalman OEM VF3000F SLI@800/2000
Seasonic M12D 750
WD Caviar 500
Coolermaster HAF 932 Black Edition
W7 64 Pro
i5 750@3800
Noctua NH-U12P/120x38mm Panaflow M1
GSkill 4G DDR3-2000 Ripjaws
EVGA P55 FTW 200
EVGA GTX 480/Zalman VF3000F &
Zotac GTX 480 AMP Edition/Zalman OEM VF3000F SLI@800/2000
Seasonic M12D 750
WD Caviar 500
Coolermaster HAF 932 Black Edition
W7 64 Pro
I will be posting pictures for sure! I am hoping it will leave the warehouse today!
-Jason
Core 2 Quad Q9650 @ 4.00Ghz 1.3375(v) F9 BIOS
2 X 2 GB DDR2 1100 @ 1000 G.Skill PC2-8800
2 X 500gb GB SATA 2 HD RAID 0
Gigabyte GA-EP45-UD3P
EVGA GTX285 SSC
EVGA 8800GTS G92 PhysX
My 3DMark Vantage Score 16,444
Pics of my computer
It will be here today!! I think I will be leaving work a little early to get things going!!
-Jason
Core 2 Quad Q9650 @ 4.00Ghz 1.3375(v) F9 BIOS
2 X 2 GB DDR2 1100 @ 1000 G.Skill PC2-8800
2 X 500gb GB SATA 2 HD RAID 0
Gigabyte GA-EP45-UD3P
EVGA GTX285 SSC
EVGA 8800GTS G92 PhysX
My 3DMark Vantage Score 16,444
Pics of my computer
Thanks, I acctually get worse temps with the case open. I cleaned my fan filters the day before and I swaped out all of the tri-cools in my antec 1200 for 1900rpm scythe slipstreams. Needless to say my case isn't very quiet, not too loud but great airflow. The side fan sits right over the video card and I have another sitting on the midde drive bay directly across from the vrms.
Cool, keep us updated. I want pics! It is a sweet looking cooler.
Last edited by BababooeyHTJ; 05-07-2009 at 11:55 AM.
Started a new Thread for my install!!
Link to be updated....
Accelero Install Thread!!!
Last edited by Jsunn; 05-08-2009 at 05:40 AM.
Core 2 Quad Q9650 @ 4.00Ghz 1.3375(v) F9 BIOS
2 X 2 GB DDR2 1100 @ 1000 G.Skill PC2-8800
2 X 500gb GB SATA 2 HD RAID 0
Gigabyte GA-EP45-UD3P
EVGA GTX285 SSC
EVGA 8800GTS G92 PhysX
My 3DMark Vantage Score 16,444
Pics of my computer
Bookmarks