I have good news and bad news, which first ? the goods one :

New rig (rampage x48) same HD on ata133 promisse PCI same mem (Gskill GTR) NB on H2O (1.77 volt) and the old 9800GX2 uning on LN2 at -45 all the bench at 945/1145 - the Nature at 880/1105 lod 4,8 and the PCIe at 120.1 - (the rest was at 124 MHz).

ORDER WAS : CH - LL - LH - DL - DH - CL ( 10 to 12 times)

Get this :



and last the NATURE (using the NVHancer to enable SLI - all the previews was at single mode)

and get Nature 1390 fps.





http://service.futuremark.com/compare?2k1=9492770

Next change the resolution for capturing prosses - save the bench at the HD (auto capture prosess using the Fastone Capture) and now is starting the BAD NEWS.

(I forgot to mention that i was put to the VGA card the Higher clock - 945/1145 - for the capture) and during the capture prosses the temp was dropt at -18 i think....)

So i change again the resolussion at 1024x768 to run again the Nature to get the extra fps (i have 10 fps to gain..)

But all the hardware is stoping and then the power was down......for a moment i think that was the PSU (Hiprotech 1200w) - i change PSU BUT the mobo dont start.....

This story was take place just a few minutes before. i take the HD and put it at my home pc to get the capture images and submit the 2k1 at ORB.

I am to tired now - it is almost 24:00 now here in Greece and i am going to sleep now.

(i am benching for 17:00 till now)....