The Maximus Formula Thread - Help/OCing/Guide/Rampage conversion

[lbassa]

Hi guys , need some help , i using E85 E0 + Maximus F X38 (VID: 1.25)
450X9
want to use this for 24/7
voltgens are safe ??
stable with 2hrs in Prime blend

CPU PLL worries me because droop , too much high ??

Extreme Tweaker 
Ai Overclock Tuner : Manual 
OC From CPU Level Up : AUTO 
CPU Ratio Control : Manual 
- Ratio CMOS Setting : 9
FSB Frequency : 450  
FSB Strap to North Bridge : 400
PCI-E Frequency: 100
DRAM Frequency: DDR2- 900 
DRAM Command Rate : AUTO
DRAM Timing Control: Manual 
CAS# Latency : 5
RAS# to CAS# Delay :  5
RAS# Precharge : 5
RAS# ActivateTime : 15
RAS# to RAS# Delay : 
Row Refresh Cycle Time : 
Write Recovery Time : 
Read to Precharge Time : 

Read to Write Delay (S/D) : 
Write to Read Delay (S) : 
Write to Read Delay (D) : 
Read to Read Delay (S) : 
Read to Read Delay (D) : 
Write to Write Delay (S) : 
Write to Write Delay (D) : 
DRAM Static Read Control: ENABLE
Ai Clock Twister : AUTO
Transaction Booster : DISABLE [1]

CPU Voltage : 1.3 (real 1.28)
CPU PLL Voltage :  1.56
North Bridge Voltage : 1.35 (real 1.38) 
DRAM Voltage : 2.02
FSB Termination Voltage : 1.36 (real 1.30)
South Bridge Voltage : 1.05
Loadline Calibration : ENABLE
CPU GTL Reference : 0,63
North Bridge GTL Reference : 0,63
DDR2 Channel A REF Voltage : 
DDR2 Channel B REF Voltage : 
DDR2 Controller REF Voltage : 
SB 1.5V Voltage : 1.5

NB LED Selection : NB Volt 
SB LED Selection : SB Volt 
CPU LED Selection : CPU VOlt 
Voltiminder LED : 

CPU Spread Spectrum : Disabled 
PCIE Spread Spectrum : Disabled 

Advanced CPU Configuration 
CPU Ratio Control : Manual 
- Ratio CMOS Setting : 
C1E Suppport : Disabled 
CPU TM Function : Disabled 
Vanderpool Technology : Disabled 
Execute Disable Bit : Disabled 
Max CPUID Value Limit : Disabled 
Legacy USB Support : Disabled