MMM
Page 1 of 5 1234 ... LastLast
Results 1 to 25 of 107

Thread: making the i7 920 naked

  1. 05-01-2009, 02:05 PM #1
    Aerou
    Aerou is offline
    Crunch-Fu Adept
    Join Date
    Sep 2005
    Location
    Czech Rep.
    Posts
    1,485
    Send a message via ICQ to Aerou

    making the i7 920 naked

    Hey!
    Long have I been thinking about this, long has this cpu been sweatin under AIR cooling while crunching and the time has finally come :

    This wonderfull i7 920 C0 that does 3800MHz at 1.2V Linpack stable is going to be sanded down to its bare core.

    While I want to post some shots in this thread,

    I also want to ask anyone :

    ANY LAST WORDS?
    Sometimes a good slap in the face is all you need

    Bios my arss.....
    I can fix this problem with a hardware mod....     Hipro5

    "Overclock till death. Overclocking is life." Hipro5
    Reply With Quote Reply With Quote
  2. 05-01-2009, 02:07 PM #2
    FabricioGS
    FabricioGS is offline
    Xtreme Member
    Join Date
    Oct 2006
    Location
    Brazil
    Posts
    223
    Just do it
    Intel Core i7 920 D0 @ 4.2GHz HT On #3844A716
    Evga Classified 760 X58 SLI
    3x2GB DDR3 OCZ Heaper HTC 1833 @ 2000 9-8-9-26 1.65v
    Thermalright Ultra 120 Extreme + MX-2
    HIS 4870 512MB @ 800/1000
    PSU Aurora eXtream 700W
    22" LG 720p 22LG30R
    Case Apple G5 Mod
    Reply With Quote Reply With Quote
  3. 05-01-2009, 02:29 PM #3
    Mr_Slinky
    Mr_Slinky is offline
    Xtreme Cruncher
    Join Date
    Dec 2004
    Location
    Wisconsin
    Posts
    1,726
    Send a message via ICQ to Mr_Slinky Send a message via AIM to Mr_Slinky Send a message via MSN to Mr_Slinky Send a message via Yahoo to Mr_Slinky
    Best of luck and don't let it slip!
    e-bay mr_slinky2530 / heat mrslinky


    XS WCG XS Dimes XS Majestic 12 XS GPUGrid
    Reply With Quote Reply With Quote
  4. 05-01-2009, 02:45 PM #4
    Josecitox
    Josecitox is offline
    Registered User
    Join Date
    Feb 2008
    Posts
    9
    Do it! do it!!! IŽll go pray for that cpu in the meantime :p
    Reply With Quote Reply With Quote
  5. 05-01-2009, 02:50 PM #5
    Aerou
    Aerou is offline
    Crunch-Fu Adept
    Join Date
    Sep 2005
    Location
    Czech Rep.
    Posts
    1,485
    Send a message via ICQ to Aerou
    Hmm ... Suppose I sand the whole IHS down, how do I clean the stuff that bonds the IHS and the core?
    Sometimes a good slap in the face is all you need

    Bios my arss.....
    I can fix this problem with a hardware mod....     Hipro5

    "Overclock till death. Overclocking is life." Hipro5
    Reply With Quote Reply With Quote
  6. 05-01-2009, 02:50 PM #6
    K404
    K404 is offline
    Wanna look under my kilt?
    Join Date
    Jun 2005
    Location
    Glasgow-ish U.K.
    Posts
    4,396
    ground down or clean IHS removal?

    hope ya dont slip up. Not a bad chip you have there!

    Have any of the QPI/VTT death CPUs been used as guinea pigs for this do you know?
    Quote Originally Posted by T_M View Post
    Not sure i totally follow anything you said, but regardless of that you helped me come up with a very good idea....
    Quote Originally Posted by soundood View Post
    you sigged that?

    why?
    ______

    Sometimes, it's not your time. Sometimes, you have to make it your time. Sometimes, it can ONLY be your time.
    Reply With Quote Reply With Quote
  7. 05-01-2009, 02:56 PM #7
    Aerou
    Aerou is offline
    Crunch-Fu Adept
    Join Date
    Sep 2005
    Location
    Czech Rep.
    Posts
    1,485
    Send a message via ICQ to Aerou
    no spares
    I am sanding it down - IHS is going to turn to dust
    If a mess it up ... Don't want to even think about it
    Sometimes a good slap in the face is all you need

    Bios my arss.....
    I can fix this problem with a hardware mod....     Hipro5

    "Overclock till death. Overclocking is life." Hipro5
    Reply With Quote Reply With Quote
  8. 05-01-2009, 03:00 PM #8
    TheGanG
    TheGanG is offline
    Xtreme Member
    Join Date
    May 2008
    Posts
    416
    Send a message via MSN to TheGanG
    Shoot it neck or let it live


    Intel DP55KG-Core i5-750-Kingston Hyperx DDR3 1800MHz-EVGA 9800GX2SC-High Power HPC 1000 G14C 1000W-HP W2448HC HDMI
    Intel DP55KG-Core i5-750-Kingston Hyperx DDR3 1800MHz-Sparkle 8800GTX-SilverStone ST1000NV 1000W-Samsung T260HD
    Reply With Quote Reply With Quote
  9. 05-01-2009, 03:05 PM #9
    NaMcO
    NaMcO is offline
    Xtreme Enthusiast
    Join Date
    Jul 2008
    Location
    Portugal
    Posts
    811
    Ooooohhhh subscribed

    Good luck with it!
    ASUS Sabertooth P67B3· nVidia GTX580 1536MB PhysX · Intel Core i7 2600K 4.5GHz · Corsair TX850W · Creative X-Fi Titanium Fatal1ty
    8GB GSKill Sniper PC3-16000 7-8-7 · OCZ Agility3 SSD 240GB + Intel 320 SSD 160GB + Samsung F3 2TB + WD 640AAKS 640GB · Corsair 650D · DELL U2711 27"
    Reply With Quote Reply With Quote
  10. 05-01-2009, 03:23 PM #10
    Aerou
    Aerou is offline
    Crunch-Fu Adept
    Join Date
    Sep 2005
    Location
    Czech Rep.
    Posts
    1,485
    Send a message via ICQ to Aerou
    main reasons being:
    the chip is one of the hotter i7 + it's a C0
    I can't seems to cool it down on AIR
    I expect big improvements
    Last edited by Aerou; 05-01-2009 at 03:56 PM.
    Sometimes a good slap in the face is all you need

    Bios my arss.....
    I can fix this problem with a hardware mod....     Hipro5

    "Overclock till death. Overclocking is life." Hipro5
    Reply With Quote Reply With Quote
  11. 05-01-2009, 04:28 PM #11
    Aerou
    Aerou is offline
    Crunch-Fu Adept
    Join Date
    Sep 2005
    Location
    Czech Rep.
    Posts
    1,485
    Send a message via ICQ to Aerou
    last shot before I say goodbye to it j/k I hope



    OK, so I'm preping the table and the cpu for wet sanding the bigger part of the IHS using 220 grit sandpaper
    Sometimes a good slap in the face is all you need

    Bios my arss.....
    I can fix this problem with a hardware mod....     Hipro5

    "Overclock till death. Overclocking is life." Hipro5
    Reply With Quote Reply With Quote
  12. 05-01-2009, 04:36 PM #12
    scottc19
    scottc19 is offline
    Xtreme Member
    Join Date
    Dec 2007
    Location
    Seattle, WA
    Posts
    496
    good luck! We will be cheering for you
    [SIZE="1"]My Comp...
    i7 @4ghz | ASUS matx Rampage II GENE | 2 Evga SC 285 gtx in SLI| Corsair 850 watt PS | 30gb Vertex SSD of OS | 150gb Raptor | 1.5tb Segate drive | Megahelms cooler | Cooler Master E341 Elite matx case
    Reply With Quote Reply With Quote
  13. 05-01-2009, 04:49 PM #13
    Aerou
    Aerou is offline
    Crunch-Fu Adept
    Join Date
    Sep 2005
    Location
    Czech Rep.
    Posts
    1,485
    Send a message via ICQ to Aerou
    thanks for the support guys

    I am starting to have mixed feelings, since I don't see myself being able to get a new i7 if this goes south, but heck, this is XS

    I made a little sanding adapter on the cpu and prepared it for wet sanding:



    Boy, here we go ...
    Sometimes a good slap in the face is all you need

    Bios my arss.....
    I can fix this problem with a hardware mod....     Hipro5

    "Overclock till death. Overclocking is life." Hipro5
    Reply With Quote Reply With Quote
  14. 05-01-2009, 05:04 PM #14
    tet5uo
    tet5uo is offline
    Xtreme Member
    Join Date
    Sep 2007
    Location
    Alberta, Canada
    Posts
    360
    dude... good luck!
    EVGA z68 FTW
    i7 2600k @ 4.8
    8gb DDR3 1600
    3x GTX 580 3gb HydroCopper2
    Silverstone Strider 1500W
    Areca 1880i w/ 6x intel x25m
    On water
    Reply With Quote Reply With Quote
  15. 05-01-2009, 05:23 PM #15
    YukonTrooper
    YukonTrooper is offline
    Xtreme Mentor
    Join Date
    Sep 2006
    Posts
    2,834
    I'd go for a clean removal, but I guess that's just me.

    For my part I know nothing with any certainty, but the sight of the stars makes me dream.

    ..
    Reply With Quote Reply With Quote
  16. 05-01-2009, 05:32 PM #16
    [XC] Synthetickiller
    [XC] Synthetickiller is offline
    Nerdy Powerlifter
    Join Date
    Jul 2007
    Location
    Down in the Bayou
    Posts
    4,553
    Send a message via AIM to [XC] Synthetickiller Send a message via MSN to [XC] Synthetickiller Send a message via Yahoo to [XC] Synthetickiller Send a message via Skype™ to [XC] Synthetickiller
    Extra good luck! I am really looking forward to the results!
    You must [not] advance.


    Current Rig: i7 4790k @ stock (**** TIM!) , Zotac GTX 1080 WC'd 2214mhz core / 5528mhz Mem, Asus z-97 Deluxe

    Heatware
    Reply With Quote Reply With Quote
  17. 05-01-2009, 05:35 PM #17
    I34z1k
    I34z1k is offline
    Xtreme Member
    Join Date
    Oct 2006
    Location
    South Africa
    Posts
    388
    Send a message via MSN to I34z1k
    Oh nice! Much excite!
    920 c0
    6gig Mushkin 1600 6-7-6-18 (Many thanks to TheGoatEater)
    285gtx
    Dfi x58 t3eh6
    Reply With Quote Reply With Quote
  18. 05-01-2009, 06:07 PM #18
    mike
    mike is offline
    silver wall jumper X
    Join Date
    Apr 2005
    Location
    Las Vegas
    Posts
    1,579
    good luck with the sanding - make sure the cpu stays nice and cool and not burn it up from excessive heat!
    Join the World Community Grid:

    https://join.worldcommunitygrid.org?...Id=517JN5ZNKD2
    Reply With Quote Reply With Quote
  19. 05-01-2009, 06:20 PM #19
    Aerou
    Aerou is offline
    Crunch-Fu Adept
    Join Date
    Sep 2005
    Location
    Czech Rep.
    Posts
    1,485
    Send a message via ICQ to Aerou
    Progress is slow and painful ... but that is excpected when sanding such a chunk of copper.
    But your replies keep me going. It's 4:20 here
    Sometimes a good slap in the face is all you need

    Bios my arss.....
    I can fix this problem with a hardware mod....     Hipro5

    "Overclock till death. Overclocking is life." Hipro5
    Reply With Quote Reply With Quote
  20. 05-01-2009, 06:29 PM #20
    sbinh
    sbinh is offline
    Xtreme Member
    Join Date
    Sep 2006
    Location
    Virginia
    Posts
    206
    Quote Originally Posted by [XC] Aerosupra View Post
    Progress is slow and painful ... but that is excpected when sanding such a chunk of copper.
    But your replies keep me going. It's 4:20 here
    It's ok .. it's only 10:30 here .. I can wait ..




    Reply With Quote Reply With Quote
  21. 05-01-2009, 06:33 PM #21
    dinos22
    dinos22 is offline
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    thats gonna take forever dude

    use really rough sandpaper at first i reckon
    got with an 80 or a 100
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?

    Reply With Quote Reply With Quote
  22. 05-01-2009, 07:10 PM #22
    Aerou
    Aerou is offline
    Crunch-Fu Adept
    Join Date
    Sep 2005
    Location
    Czech Rep.
    Posts
    1,485
    Send a message via ICQ to Aerou
    Quote Originally Posted by dinos22 View Post
    thats gonna take forever dude

    use really rough sandpaper at first i reckon
    got with an 80 or a 100
    Close to forever probably My arm is biting the dust

    My battery is really depleted now, so I'm gonna hit the sack for some time and continue later on.

    For those watching, here's a progress shot after 2 sheets:

    Sometimes a good slap in the face is all you need

    Bios my arss.....
    I can fix this problem with a hardware mod....     Hipro5

    "Overclock till death. Overclocking is life." Hipro5
    Reply With Quote Reply With Quote
  23. 05-01-2009, 07:18 PM #23
    clo007
    clo007 is offline
    Xtreme Member
    Join Date
    Jun 2007
    Posts
    495
    Looking pretty damn good man!!!!
    Gaming/Rendering rig:
    eVGA X58 Tri-SLI
    Intel i7-970 w/ Corsair H100
    24gigs Corsair 2000s
    eVGA GTX580 3GB
    Too many HDD's
    LG Blu-ray player
    Corsair hx1050 psu
    Corsair 800D case
    Reply With Quote Reply With Quote
  24. 05-01-2009, 07:54 PM #24
    chuxle
    chuxle is offline
    Registered User
    Join Date
    Dec 2007
    Location
    Deep isolated Mongolia
    Posts
    53
    Send a message via ICQ to chuxle Send a message via AIM to chuxle
    Very anxious to see the final product, but looking good so far.


    CPU: i7 Core OC @ 4.2Ghz D0 HT ON
    Motherboard: Asus P6T Deluxe
    RAM: 6 Gb Corsair Dominator 1600mhz 8-8-8-24 1T
    Video card: EVGA GTX 285 x 2 (SLI)
    HD: 4 Velociraptors (300 gb) in Raid 0 w/ Areca 1210
    HD: WD 1T Storage
    PSU: Corsair HX1000W
    Reply With Quote Reply With Quote
  25. 05-01-2009, 08:55 PM #25
    dexster
    dexster is offline
    Xtreme Member
    Join Date
    Aug 2006
    Location
    adelaide.sa.au
    Posts
    120
    good luck...it will be interesting to see the difference it will make in temps , clock speed etc
    |W3570|ClassifiedE760|12gbGT2000c7|2x[XFXgtx295]|X-fiForte|2xF120raid0|2x300gbVraptor|HX1000|LianPC-71|Dell3007wfp-HC|

    Quote Originally Posted by dinos22 View Post
    SuperPi is like caviar. It's an acquired taste.
    Reply With Quote Reply With Quote
Page 1 of 5 1234 ... LastLast
« Previous Thread | Next Thread »

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules