Micron D9 GMH\GKX\JKH etc club

[Slyr7.62]

pl 8 rulez

Nice 1320mhz w/ PL8. . I usually run PL7 @ 1066 w/ 1.9V

[Mafio]

Nice 1320mhz w/ PL8. . I usually run PL7 @ 1066 w/ 1.9V

1200 pl 7 vdimm 2.35

[simone18]

nice cpu i see there

[Don_Dan]

Really good results there Mafio, PL 7 at 500 MHz FSB is awesome!
Do you have an Everest benchmark result of it?

A bit OT, but why are you still using such old versions of Everest and MemSet?
MemSet 4.0 and Everest 5.01 are available and will recognize your board and memory correctly! Check it out!

[Mafio]

Really good results there Mafio, PL 7 at 500 MHz FSB is awesome!
Do you have an Everest benchmark result of it?

A bit OT, but why are you still using such old versions of Everest and MemSet?
MemSet 4.0 and Everest 5.01 are available and will recognize your board and memory correctly! Check it out!

thx

now i haven't the dfi p45 UT...this board sucks and i sold it
i made that bench long time ago with the latest version of the programs

i don't have everest bandwidth bench

[Mafio]

nice cpu i see there

yes, my e6600 isn't bad

in can do 4ghz on air with 1.47/1.48 of vcore

[Don_Dan]

now i haven't the dfi p45 UT...this board sucks and i sold it
i made that bench long time ago with the latest version of the programs

i don't have everest bandwidth bench

Thanks for the answers!

[Mafio]

Thanks for the answers!

ep45 extreme @ 500 fsb, PL 7
cellshock pc8000 @1200 4-4-4-4 2.4volt
super-pi 8M

[zsamz_]

thx

now i haven't the dfi p45 UT...this board sucks and i sold it
i made that bench long time ago with the latest version of the programs

i don't have everest bandwidth bench

gigabut boards are easy to overclock
but i see your bandwidth suks compared to a dfi

[Mafio]

gigabut boards are easy to overclock
but i see your bandwidth suks compared to a dfi

the bandwidth is about the same...
if i remember correctly dfi do 0.05ns better than my gigabyte

but my gigabyte can do over 600mhz of fsb on air, my dfi p45 UT boot @ 530/540...

for 530/540 of fsb p35 is good, a p45 if isn't capable of 600+ mhz of fsb is totally useless

[Shiranui Gen-An]

the bandwidth is about the same...
if i remember correctly dfi do 0.05ns better than my gigabyte

but my gigabyte can do over 600mhz of fsb on air, my dfi p45 UT boot @ 530/540...

for 530/540 of fsb p35 is good, a p45 if isn't capable of 600+ mhz of fsb is totally useless

UT P45@600FSB has been done:
http://forums.vr-zone.com/overclocki...-p45-t2rs.html
http://www.foxtech.co.kr/bbs/board.p...review&wr_id=5

A poster here has even done it: http://67.90.82.13/forums/showpost.p...1&postcount=32

[Mafio]

UT P45@600FSB has been done: http://forums.vr-zone.com/overclocki...-p45-t2rs.html

my old dfi can't do more than 540...

[zsamz_]

my old dfi can't do more than 540...

i bet i could get her to do 600+
i can do 590 on my ut p35 the max on my board
dfi board are like drivin a 6 speed stick
gigabut boards like drivin an 4 speed automatic

[zsamz_]

the bandwidth is about the same...
if i remember correctly dfi do 0.05ns better than my gigabyte

but my gigabyte can do over 600mhz of fsb on air, my dfi p45 UT boot @ 530/540...

for 530/540 of fsb p35 is good, a p45 if isn't capable of 600+ mhz of fsb is totally useless

user related
the ut p45 has same performance as ut p35
and its more like 2-4ns and 500-800mbs difference
i agree if i had a p45 and i couldnt do 600fsb with it i'd killmyself
the only thing the gigabut boards are good for is for 525+fsb with quads

[simone18]

600+ (maybe 610) on dfi ut p35 :p (read in sign )

gigabyte p45 are good not only with quad, but also with dual...i made 660mhz with e8400 @ air (temp amb 20°)
yep, they quite sucks @ memory bandwidth, but all board suck compared to dfi

[Mafio]

user related
the ut p45 has same performance as ut p35
and its more like 2-4ns and 500-800mbs difference
i agree if i had a p45 and i couldnt do 600fsb with it i'd killmyself
the only thing the gigabut boards are good for is for 525+fsb with quads

maybe 2-4 hours

[tool_462]

Not the best spot for this I know...

Looking for some proven D9's as backups to my Firestix in the US for a reasonable price

Would like some Teams or CellShocks but just need a backup set (or a primary set if they can out clock my Firestix )

[zsamz_]

maybe 2-4 hours

2-4 hours not enough to learn how to use a dfi board

[zsamz_]

Not the best spot for this I know...

Looking for some proven D9's as backups to my Firestix in the US for a reasonable price

Would like some Teams or CellShocks but just need a backup set (or a primary set if they can out clock my Firestix )

i got a few new sets i can let go of

[Shiranui Gen-An]

Not the best spot for this I know...

Looking for some proven D9's as backups to my Firestix in the US for a reasonable price

Would like some Teams or CellShocks but just need a backup set (or a primary set if they can out clock my Firestix )

http://computers.search.ebay.com/_Fo...richonlinedeal

[Mafio]

i'm waiting your dfi p45 UT at 657mhz of fsb with multiplier 7x

http://valid.canardpc.com/show_oc.php?id=556373

i'm at air

[zsamz_]

i'm waiting your dfi p45 UT at 657mhz of fsb with multiplier 7x

http://valid.canardpc.com/show_oc.php?id=556373

i'm at air

you gonna have to wait for my ut p35 to die

[Mafio]

you gonna have to wait for my ut p35 to die

bla bla bla

your p35 ut maybe can do it under ln2...

[Don_Dan]

zsamz_, everytime someone posts a result made with a Gigabyte board you say how much slower it is than a DFI. Don't get me wrong, I like DFI for pushing memory speed and timings and the BIOS work they have delivered for years is awesome.

But now I own a Gigabyte board, and I would like to see how big the DFI advantage is in reality at the same clocks. So maybe we can agree on some clocks just like Vince's low-clock challenge and you will run the Everest benchmarks and Mafio and I will be happy to try and match your results!
Deal?

[simone18]

i agree with dan
anyway dfi superior speed @ same settings is evident. but, dfi p45 series is not so good as gigabyte, expecially in fsb clocking. also in clocking ram gigabyte has improved a lot. and man, dfi ut p35 il really >>> than ut p45