Asus M3A79-T Deluxe

[Sunfire]

I would assume that since 0901 isn't listed on the normal download site it must still be a beta. I just checked again and it's still not avalible from Asus USA web site.

It isn't listed on the global site either, but the BIOS History contains this:

[ 0901 ]
----------------------
Fix the problem that CPU Vcore might not drop to appropriate voltage when Cool'n'Quiet actived and Q-Fan enabled at same time.

It seems that it's just a quick fix, no major improvements.

[Tom128]

0803 Bios and a PhII 955...anyone else seeing temps that seem higher than they should? I have mine under water, 1.375v ant 3.7Ghz thus far (just started OCing) and its already at 50c. That seems high to me.

[gOtVoltage]

0803 Bios and a PhII 955...anyone else seeing temps that seem higher than they should? I have mine under water, 1.375v ant 3.7Ghz thus far (just started OCing) and its already at 50c. That seems high to me.

Check the thermal paste and seating of WaterBlock,, i know its a pain but that may be more than a little higher than normal @ only 3.7ghz.@ 1.375volts

Hmmm 720BE there is a Temp differance in Bios using 803 vs 703..

(0030 X3 to X4 bios) I use 1.62volts on my 720 for X4cores @ 3700mhz. Idle in Bios is 32c

56 -60c is thermal cut off/protection if i rember correct.


Bios wise,,

803 is the most reliable and recomended for 955,, The Bios Does report Higher Idle temp for my Tripple Vs the 703,,Ive read other people with 945/955 have slightly higher temp too.

Also 803 Bios my 720 @ 1.64v @3900mhz/2600nb it shows 30c in Bios and In Vista im @ 27c. i checked my W/B with thermal probe and its 22c. My chipset is also 22c. So id say the Bios is ramping up the temp .

Im using water too.

The 0901 Bios is basically CnQ optimazations and C1E update. It seems to work now with CnQ but offers nothing More. When its made Official it will most likely perform same as 803. Im Back on the Official 803 after trying the 0901 this morning. There was no gain for me . CnQ does work with C1E for the most part though. Since i dont use CnQ ill stick with 803